Westin 31-0190 User manual

INSTALLATION INSTRUCTIONS
APPLICATION: SKID PLATE ASSEMBLY FOR BULL BARS
75-0301 Revision 03/13/01
1
2
5
2
4
3
SKID PLATE ASSEMBLY 5/32” ALLEN WRENCH
MOUNT CLAMPS 7/16” WRENCH
1/4-20 X .75 BUTTON HEAD CAP SCREW
1/4-20 NYLON INSERT LOCK NUT
1/4” FLAT WASHER
1/4” INTERNAL TOOTH LOCK WASHER
FASTENERS ARE BAGGED IN KIT 60-1203.
PARTS KIT CONTENTS TOOLS REQUIRED
QTY DESCRIPTION
STEP 1.
STEP 2.
Remove the contents from the box and check for any damage. Verify all parts against the parts list.
Read and understand instructions completely before beginning installation.
STEP 3.Install (3) 1/4-20 x .75” Button Head Cap Screws and (3) 1/4” Internal Tooth Lock Washers with 5/32” Allen
Wrench to bottom of Center Tube on Bull Bar Assembly. Leave loose.
Slide Mount Clamps over ends of Bull Bar Legs with clamp flanges under skid plate. Install (2) 1/4-20 x .75 Button
Head Cap Screws, (4) 1/4” Flat Washers and (2) 1/4-20 Nylon Insert Lock Nuts.
Tighten and torque 1/4” Fasteners to 50 IN. LBS.
STEP 4.
STEP 5.
SKID PLATE
ASSEMBLY
31-0190

Finish protection - Westin products have a high quality finish that must be cared for like any
other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax
(pure carnauba, for example) on a regular basis. The use of cleaner wax or any compound which
containsanabrasiveisdetrimental,asthecompoundsscratchthefinishandopenittocorrosion.
Thank You for choosing Westin products
For aditional installation assistance please call
Customer service [phone] or [phone]
Westin Automotive Products, Inc.
5200 N. Irwindale Ave. Suite 220
Irwindale, Ca. 91706
BULL BAR ASSEMBLY
SKID PLATESKID PLATE
(2) 1/4-20 X .75” BUTTON HEAD CAP SCREWS
(4) 1/4” FLAT WASHERS
(2) 1/4” NYLON INSERT LOCK NUTS
(2) 1/4-20 X .75” BUTTON HEAD CAP SCREWS
(4) 1/4” FLAT WASHERS
(2) 1/4” NYLON INSERT LOCK NUTS
(3) 1/4-20 X .75” BUTTON HEAD CAP SCREWS
(3) 1/4” INTERNAL TOOTH LOCK WASHER
(3) 1/4-20 X .75” BUTTON HEAD CAP SCREWS
(3) 1/4” INTERNAL TOOTH LOCK WASHER
MOUNT CLAMP