Whalen Montreal Laptop Desk User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Manufacturing Page 1 Factory No. 17074
Date 2015-03-16 Rev. 1 Factory: WUHIND
Montreal Laptop Desk
Model # ODUS-MLD
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenfurniture.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASE
D
:
/
/

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 2 Factory No. 17074
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Montreal Laptop Desk (ODUS-MLD)
MADE IN CHINA
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from province to
province (state to state).
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenfurniture.com
MAXIMUM RECOMMENDED WEIGHT LOADS
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE
MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE
MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING
POSSIBLE INJURY.
MAXIMUM LOAD 45.4 kg / 100 lb

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 3 Factory No. 17074
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Wood Top Frame (1) B- Metal Top Frame (1) C- Left Wood Leg (1)
D- Right Wood Leg (1) E- Metal Leg (2) F- Bottom Stretcher (1)
G- Metal Bar (2) H- Top Support (2) I- Glass Top (1)
(1) 5/8” Bolt (2) 1” Pan Head Bolt (3) 1” Flat Head Bolt
(12+1 extra) (12+1 extra) (2+1 extra)
(4) 1-3/4” Bolt (2+1 extra) (5) Lock Washer (12+1 extra) (6) Flat Washer (12+1 extra)
(7) M8 x 30 mm Wood Dowel (4+1 extra) Allen Wrench (2) Touch-up Pen (1)
Tools required: Allen wrench (provided).

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 4 Factory No. 17074
Assembly Instructions
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Fasten 2 Top Supports (H) to the side rails of Metal Top Frame (B) using the 1” Bolts (2). As shown.
Make sure that the stand-off of Top Support (H) points towards the back rail of Metal Frame (B) that
has two threaded sockets for the Metal Bars (G).
1” Pan Head Bolt
(2 used in this step)
②
H
H
2
2
B

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 5 Factory No. 17074
Assembly Instructions
3. Place the Wood Top Frame (A) on a level and protective surface with the holes facing up. As shown.
4. Align and attach the Metal Top Frame (B) to the Wood Top Frame (A) by using six 1” Bolts (2). As
shown. Make sure that the stand-off of Top Supports (H) point towards the back of the Wood Top
Frame (A). NOTE: the rail included the threaded sockets for Wood Legs (C and D) is back rail.
1” Pan Head Bolt
(6 used in this step)
②
2
B
A
2
2
2
2
2

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 6 Factory No. 17074
Assembly Instructions
5. Insert four M8 x 30 mm Wood Dowels (7) into the non-threaded holes on the Wood Top Frame (A). As
shown.
6. Align and attach Left and Right Wood Legs (C and D) to the Wood Top Frame (A) with four 1” Bolts
(2), four Lock Washers (5) and four Flat Washers (6). As shown. Make sure that the metal trim on both
Wood Legs face inward. DO NOT tighten the bolts in this step.
1” Pan Head Bolt
(4 used in this step)
②
Flat Washer
(4 used in this step)
⑥
Lock Washer
(4 used in this step)
⑤
M8 x 30 mm Wood Dowel
(4 used in this step)
⑦
7
7A
D
C2
5
6
2
5
6

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 7 Factory No. 17074
Assembly Instructions
7. Insert one 1” Bolt (3) through the stand-off of each Top Support (H) and screw into the metal trim of
Wood Leg (C and D). As shown.
D
H
3
C
H3
A
1” Flat Head Bolt
(2 used in this step)
③

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 8 Factory No. 17074
Assembly Instructions
8. Align and attach 2 Metal Legs (E) to the Wood Legs (C and D) by using the 5/8" Bolts (1) with the
Lock Washers (5) and Flat Washers (6) through the end metal brackets and screw into place. As shown.
Lock Washer
(8 used in this step)
⑤
Flat Washer
(8 used in this step)
⑥
5/8” Bolt
(8 used in this step)
①
1
5
6
1
5
6
1
56
1
5
6
C
D
E
E
A

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 9 Factory No. 17074
Assembly Instructions
9. Fit the Bottom Stretcher (F) between the drilled holes on the Metal Legs (E) making sure the threaded
sockets face backward. Attach the Bottom Stretcher (F) in place using two 1-3/4” Bolts (4) through the
drilled holes on Metal Legs (E) and screw into the threaded nuts. As shown.
E
C4
E
D
4
F
1-3/4” Bolt
(2 used in this step)
④

Model # ODUS-MLD
Whalen Furniture Manufacturing Page 10 Factory No. 17074
Assembly Instructions
10. Ask for assistance to lift the unit upright.
11. Align and attach 2 Metal Bars (G) between the Bottom Stretcher (F) and the Metal Top Frame (B) for
extra support, using the 5/8” Bolts (1). As shown.
12. Go back and securely tighten all bolts with the enclosed Allen wrench.
5/8” Bolt
(4 used in this step)
①
1
1
1
1
A
F
GG
B