Wildix W04FXS User manual

W04FXS 2020 Quick Installation Guide
W04FXS 2020 Quick Installation Guide Page 1 of 4
Jul 09, 2020 06:56
W04FXS 2020 Quick Installation Guide
Overview and LED indicators
04FXS Overview
LED indicators description
Installation and network connection
Network connection
Provisioning
Configuration
Assign analog ports
Set differentiated ringtones
Factory reset
Control calls using Flash button
Overview and LED indicators
04FXS Overview
1 - DC 12V power supply (optional, code: )PS-12V2A
2 - FXS ports 1-4
The Document describes how to connect and configure W04FXS Media Gateway.
:FXS Gateways Datasheet Media Gateways Datasheet
, Other FXS Media Gateways Guides: W01/02/04FXS old generation - Quick Installation Guide W02FXS
2018 Quick Installation Guide, W24FXS 2015 Quick Installation Guide
Created: June 2020
Permalink: https://confluence.wildix.com/x/FYK5Aw

W04FXS 2020 Quick Installation Guide
W04FXS 2020 Quick Installation Guide Page 2 of 4
3 - WAN/ PoE port
4 - LAN port
5 - FXS 1-4 LED indicators
6 - Power indicator: shows power supply status
7 - Running indicator: indicates network registration status
8 - Reset button
LED indicators description
Indicator Definition Status Description
PWR Power indicator On The device is powered on
Off There is no power supply or power supply is abnormal
RUN Running indicator Slow
flashing The device is running properly
Fast
flashing SIP registration is successful
Off The device is running improperly
FXS 1-4 FXS In-use
indicators On FXS port is currently occupied by a call
Off FXS port is idle or faulty
WAN/PoE/
LAN Network indicators Green flashing The device is properly connected to network
Off The device is not connected to network or the connection is
improper
Installation and network connection
Connect network cable to WAN/ PoE port
Connect telephone line to the FXS port(s)
Network connection
The Gateway works in two network modes: Route and Bridge modes.
Note: W04FXS 2020 is a wall-mounted Media Gateway.

W04FXS 2020 Quick Installation Guide
W04FXS 2020 Quick Installation Guide Page 3 of 4
LAN port is configured in Bridge mode and WAN port is set up as a DHCP Client. Connect one of two ports to the
same network as the PBX or an external DHCP server (for instance, its router).
As soon as the DHCP server assigns an IP address to the Gateway, you can pass to the next step of the
Gateway configuration.
In case the PBX is used as a DHCP server, the gateway is detected on the network automatically
In case an external DHCP server is used, check the list of the active leases to detect the IP address
assigned to the Gateway
Provisioning
Follow our to provision the gateway.Provisioning of Wildix devices - Admin Guide
For remote/ unreachable media gateways behind NAT/Firewall, follow our .online Guide to remote provisioning
Configuration
Assign analog ports
Follow our online guide to assign the analog ports of the FXS gateway: Assign analog ports of FXS to users.
Set differentiated ringtones
W04FXS supports differentiated ringtones for internal/ external/ blacklist/ whitelist call classes.
Differentiated ringtones can be set in Dialplan. Add the following Dialplan applications for configuration:
Set -> Type of call -> select the call class
Dial the phone -> routes the call to the specified number
Dialplan example:
Detailed information on Dialplan applications: .Dialplan applications Admin Guide
Factory reset
Use the paper clip or the object of the similar shape to press the buttonReset
Keep the button pressed up to 15 seconds
When PWR and RUN LED indicators become steady green, the reset of the Gateway is complete
Control calls using Flash button

W04FXS 2020 Quick Installation Guide
W04FXS 2020 Quick Installation Guide Page 4 of 4
Read the document: .How to control calls using Flash button on FXS Media Gateways