WINDGOO Technology FST10 User manual

ENGLISH MANUAL
Scan me

Contents
1 Safe use informaon ------------------------------------------------------------------------------------------------------
2 Product introducon ------------------------------------------------------------------------------------------------------
3 Learn how to drive ---------------------------------------------------------------------------------------------------------
4 Charging and precauons ------------------------------------------------------------------------------------------------
5 Basic parameters -----------------------------------------------------------------------------------------------------------
6 Daily maintenance ---------------------------------------------------------------------------------------------------------
7 Legal informaon -----------------------------------------------------------------------------------------------------------
8 Warranty card ---------------------------------------------------------------------------------------------------------------
03
06
10
12
14
15
16
17
02
ENGLISH

1 Safe use informaon
1.1 About safe use
Any tool for riding instead of walk has safety risks, and electric scooter is no excepon. Therefore, for your safety
sake, you have the responsibility and obligaon to learn how to drive electric scooter, and strictly abide by relevant
local laws and regulaons.
-Before each driving, please check whether the res of the electric scooter are damaged, whether the parts are
loose. If there is any abnormal situaon, please contact the agent for overhaul in me.
-Please do not use the electric scooter to do anything that endangers the safety of human life or property.
-Please do not modify the parts of the electric scooter privately, which will not only affect the performance of the
electric scooter or even damage it, but also cause serious injuries.
1.2 Safety instrucon
Under whatever circumstances you use an electric scooter, you may be injured due to loss of control, collision and
falling. To avoid injury, you must be familiar with the manual and ensure that the product is in good condion.
Please take safety measures before riding, such as wearing sportswear,
helmet, knee pads, elbow pads and other protecve tools. No riding in the rain.
03

No riding with load；no riding with more
than one person at the same me.
Children, old people, and pregnant women
are not allowed to ride.
Overweight riding is strictly prohibited
(the maximum load capacity of electric
scooter is 50 ~ 150kg).
No riding aer drinking or taking medicine.
04

No talking on the phone, listening to music
with headphones or doing other distracons
while riding.
Pay aenon to road condions while riding, and avoid
complex road condions, such as height limit, complex
road surface(roadblocks, gravel, soil, water, sloppy, ice
and snow area), steep slope (less than 20 degrees),
obstacles, steps, dark light, etc.
It is strictly prohibited to use in unsafe environment.
It refers to a possible dangerous place, such as fire or
explosion, which may form as a result of inflamma-
ble, explosive, steam, liquid, dust or fiber, etc.
No cycling on motorway. Scooter is a kind of tool
for riding instead of walk.
05

2.1 Vehicle diagram
Display screen
Accelerator handle
Grip
Brake handle
Folding pedals
8-inch solid res
Mudguard
Parking kickstand
2 Product introducon
06

2.2 Funcon introducon
1. Switch on / off: long press the power buon to turn on / off the power.
2. Acceleraon: Press the accelerator buon on the right hand to start and accelerate.
3. Brake: press the brake handle on the le handlebar to brake.
4. Up and down gear: when the machine does not accelerate aer starng up, gently press the XX buon to cycle
up and down gear.
5. Headlights on /off: Turn on and off the headlights by pressing the buon above the headlight when the machine
is turned on without acceleraon.
6. Cruising at constant speed: (cruise can be increased according to customer's requirements) Turn the throle to a
certain posion and hold for 6-8 seconds to enter the cruise mode at constant speed. At this me, release the
throle and the scooter will automacally drive at a constant speed. Press the throle or brake lightly, and the
cruise control will be canceled.
7. Warning: the instrument has been set. Please do not change the parameters arbitrarily. If the parameters are
changed privately, there will be no warranty.
Current speed
Brake handle
Display instrument
Power buon
Accelerator handle
Gear posion
Power
Upshi key
Speed unit
Power buon
Total mileage
Downshi buon
Grip
07

2.3 How to expand
1.Step on the folding buckle
with your foot.
3.Push the vehicle tube forward.
4.Expansion completed.
5.Grip installation: screw the left and
right grips into the screw holes.
2.Then hold the vehicle tube linking the
front tire and grip, and lift it up.
08

2.4 How to fold
1.Step on the folding buckle with your foot.
2.Hold the grip and push forward.
3.Then pull back.
4.The vehicle tube is pressed down.
5.Folding completed.
6.Grip removal: screw out the screw
holes on the left and right grips.
09

Note: There is a risk of falling and injury during the
study, so please wear helmets, knee pads, elbow pads
and other protecve tools throughout the course.
1.Long press the power buon for 2
seconds to turn on.
2.Stand on the pedal with one foot and push
the other foot back on the ground.
3.When the electric scooter is sliding, step on the pedal
with the other foot and keep both feet stable.
3 Learn how to drive
10

4.Gently press the accelerator buon of the right
handlebar to drive slowly, and turn the handlebar
to control the riding direcon (similar to bicycle).
5.Lightly press the accelerator buon on the right
hand, the car can accelerate, remember not to be
too fast.
6.Press the le handle buon to brake. When the speed is too fast, the le
foot can step on the rear wheel fender for auxiliary braking. Be careful not to
press the brake buon too hard, otherwise it will cause a sudden brake.
7.When the electric scooter stops or rides slowly,
put down one foot and get off normally.
11

4.1 Baery parameters
4.2 Baery safety
-Stop using in case of eming an odor or excessive heat / leakage of any substance.
-Only professionals can disassemble and maintain the electric scooter.
-Be sure to unplug the charger before driving. It is dangerous to do anything related to electric scooters while
charging.
-To obtain the highest operaon efficiency of the electric scooter, the baery temperature must be within the
temperature range indicated in the baery specificaon.
-Lithium baeries are considered dangerous and need to be permied by local laws during transportaon.
-The baery contains dangerous substances/Do not disassemble it privately.
This paper mainly describes the charging method of the electric scooter, the maintenance method of the baery,
the safety maers needing aenon, and the baery specificaon. For the safety of you and others, maximize the
baery life and improve the baery performance, please be sure to use the baery according to the following
operaons.
Name
Baery type
Charging me
Voltage
Inial capacity (oponal)
Max charging voltage
Parameters
Lithium-ion baery
3-6 hours
36V
5.2Ah 6.6Ah 7.8Ah 9.6Ah
42V
Name
Working temperature
Charging temperature
Storage me
Storage relave humidity
Max charging current
Parameters
0℃- 45℃
0℃- 60℃
3 months (full power)
5% - 95%
1A - 2A
4 Charging and precauons
12

-Only the charging equipment provided by our company is allowed to charge the electric scooter. Do not charge
indoor.
-It is forbidden to charge the over-discharged lithium baery. Over-discharged baeries have potenal safety
hazards and can only be scrapped.
-The baery of an electric scooter can only be used under the permission of local laws.
-Make sure that the charging port is dry without foreign maer, and the electric scooter is turned off.
-First, plug the charger into the charging port of the electric scooter, and then plug the other end of the charger
into the commercial power supply (100v-240v; 50 / 60Hz), and make sure that the indicator lamp of the charger is
on normally.
-When the charger indicator lamp is red, it indicates that the charging is normal. Otherwise, please check whether
the circuit is connected well.
-When the charger indicator lamp is green, it indicates that the baery is full and you can stop charging.
-Aer charging is completed, be sure to close the dust cover of the charging port to avoid short circuit caused by
the contact with external metal objects or water in the charging port.
4.3 Charging steps
1.Under the shutdown state, plug the charger into the charging port of the electric scooter.
2.It can be charged aer power on.
13

Expanded size
Folded size
Maximum load
Body weight
Maximum speed
Theorecal endurance
Maximum climbing
Motor parameters
Charger output voltage
Charger input current
1083*432*1168mm
1175*432*365mm
50-100kg
12.2kg
≤25km/h
15-30km
10°-15°
250w/36v-350w/36v
42v
2A
5 Basic parameters
14

6.1 Maintenance precauons:
-Make sure that the charger and charging line of the electric scooter are disconnected, and that the electric
scooter is turned off.
-Wipe the shell with a so cloth to clean the electric scooter. Do not add too much lubricang oil to bearing
maintenance.
-It is forbidden to use a high-pressure water gun or soak in liquid to clean the electric scooter, which will cause
permanent damage to the internal electronic components of the host.
-In order to protect the safety of users, users are not allowed to disassemble the electric scooter privately, other-
wise it will be regarded that the user automacally give up the maintenance and warranty rights of the product.
Warning
-Fully charged, 60kg load, 25 ° C. It is measured on the flat and hardened road, no wind environment, driving in
cruise mode at a speed of 15km / h. The driving mileage will vary according to different load, wind speed, road
condions and operator habits.
Endurance instrucons
-Before storage, please fully charge your scooter to prevent over-discharge of the baery caused by prolonged use.
Please make sure to charge and discharge it at least once a month.
-Do not charge the scooter if the storage temperature is below 0°C. It can be placed in an indoor environment
(above 10°C) for recharging and stored at -10°C-35°C.
-Please store the electric scooter indoors in a dry place with proper temperature. You can shield the electric
scooter to prevent dust accumulaon from affecng performance.
Storage
6 Daily maintenance
15

This product’s packaging materials are recyclable and can be reused. This product and the accessories
packed together are the applicable product to the WEEE direcve except baeries. Please dispose of
any materials in accordance with your local recycling regulaons. When discarding the unit, comply
with your local rules or regulaons. Baeries should never be thrown away or incinerated but
disposed of in accordance with your local regulaons concerning chemical wastes.
Recycling:
The CE mark indicates that this product has been manufactured according to current regulaons for
electromagnec felds, which means that it is safe to use if used according to safety instrucons. The
product is manufactured according to current regulaons within the EU legislaon, liming the use of
hazardous substances in electrical and electronic equipment.
Law and Safety:
Company name: WINDGOO Technology S.L
Postal address: Avenue of Castell de Barbera, number 21-27. Nave2. Industrial polygon Sanga.Spain
Declare that the DoC is issued under our sole responsibility and belongs to the following product:
Product name: Electric scooter
Model: FST10
The object of the declaraon described above is in conformity with the the essenal requirements of Machinery
Direcve 2006/42/EC
The following harmonized standards and technical specificaons have been applied:
EN 60335-1:2012+A11:2014+A13:2017
EN ISO 12100: 2010
2006/42/EC Annex I
We
7 Legal informaon
16

1. The whole vehicle is guaranteed for half a year
2. The warranty service is only valid under normal use. The appearance of exterior parts is not covered by the
warranty.
3. All damages such as man-made damage, self-disassembly and improper use are not covered by the warranty.
4. This card must be provided during the warranty. If the card is not provided or altered privately, the company has
the right to do non-warranty treatment.
Please keep the warranty card as the aer-sale cerficate. For non-human damages and
malfuncons, aer-sales service is provided in accordance with the following terms:
User name
Correspondence Address
Phone number
Purchase address
Purchase price
Product name and specificaon
Dealer signature
Gender
Day Month Year
Age
Postcode
Sales order number
Body number
User signature
8 Warranty card
17