Woodway Curve User manual

Non-Motorized Treadmills
Includes the models:
Curve
Curve 1.5
Curve 3.0
Curve Trainer
Curve XL
EcoMill
User’s Manual
UM-NT-EN-00

European Representative
Manufacturer
WOODWAY GmbH
Steinackerstr. 20
79576 Weil am Rhein
Germany
WOODWAY USA, Inc.
W229 N591 Foster Ct.
Waukesha, WI 53186
USA
Tel.: + 49 (0) 7621-940 999-0
Fax.: + 49 (0) 7621-940 999-40
E-mail: [e-mail]
Web: www.WOODWAY.de
Tel.: 1 262 - 548 - 6235
Fax.: 1 262 - 522 - 6235
E-Mail: [email protected]
Web: www.WOODWAY.com

07/2014-v1.0en 3
Table of Contents
1Safety ...................................................................................................................................7
1.1 Important Safety Instructions .....................................................................................................7
1.2 Description of Warning Notices...................................................................................................8
1.3 Safety Notices on Device.............................................................................................................9
1.4 Health Risks..............................................................................................................................11
1.5 Intended Use............................................................................................................................11
1.6 Unauthorized Modes of Operation............................................................................................12
2Introduction........................................................................................................................ 13
2.1 Operating Instruction Information ............................................................................................13
2.2 Limitation of Liability ................................................................................................................14
2.3 Copyright .................................................................................................................................14
2.4 Replacement Parts....................................................................................................................14
2.5 Customer Service......................................................................................................................15
3Technical Data .................................................................................................................... 16
3.1 Name Plate...............................................................................................................................16
3.2 Technical Specifications ............................................................................................................17
3.3 Power Requirements ................................................................................................................18
3.4 Dimensions ..............................................................................................................................18
4Transportation and Storage ................................................................................................ 20
4.1 Safety Notices for Transportation..............................................................................................20
4.2 Transporting the Treadmill........................................................................................................21
4.3 Storage.....................................................................................................................................21
5Product Description............................................................................................................. 22
5.1 Function...................................................................................................................................22
5.2 Running Surface .......................................................................................................................22
5.3 Transport System .....................................................................................................................23
6Setup and Installation ......................................................................................................... 24
6.1 General ....................................................................................................................................24
6.2 Installation ...............................................................................................................................24
6.3 Assembly Instructions...............................................................................................................25
6.3.1 Positioning the Device .................................................................................................................................25
6.3.2 Mount the CURVE Display Screen to the Horseshoe...................................................................................26
6.3.3 Mounting the ECOMILL Display Screen to the Horseshoe ............................. Error! Bookmark not defined.
6.3.4 Mounting the Railing Set .............................................................................................................................27

408/2015 –UM-NT-EN-00
6.3.5 Mounting the rail set (CURVE XL only)............................................................Error! Bookmark not defined.
6.3.6 Mounting the Side Panels ........................................................................................................................... 33
6.3.7 Mounting the Side Panels (CURVE XL only).....................................................Error! Bookmark not defined.
7Operation............................................................................................................................38
7.1 For Your Safety......................................................................................................................... 38
7.2 Safety Equipment..................................................................................................................... 39
7.2.1 Controlled Start Speed (ECOMILL) .............................................................................................................. 39
7.2.2 Emergency Stop with Pull Cord (ECOMILL) ................................................................................................. 39
7.2.3 Single-Direction Motion .............................................................................................................................. 40
7.2.4 Safety Railing............................................................................................................................................... 41
7.3 Practical Training...................................................................................................................... 41
7.3.1 Professional Consultation ........................................................................................................................... 41
7.3.2 Warm-Up and Cool-Down ........................................................................................................................... 41
7.3.3 Proper Body Form ....................................................................................................................................... 41
7.3.4 Measuring Heart Rate ................................................................................................................................. 42
7.3.5 Calculating Maximum Heart Rate ............................................................................................................... 42
7.3.6 Training Frequency...................................................................................................................................... 42
7.3.7 Heart Rate Chart ......................................................................................................................................... 43
7.4 Contact Heart Rate Measurement (ECOMILL) ............................................................................ 43
7.5 Heart Rate Monitor .................................................................................................................. 44
7.5.1 Applying the Chest Strap............................................................................................................................. 44
7.5.2 Transmitter Function .................................................................................................................................. 45
7.6 Display- CURVE......................................................................................................................... 45
7.6.1 Display Parameters ..................................................................................................................................... 45
7.6.2 Description of Display Elements ................................................................................................................. 46
7.6.3 Function Key Description ............................................................................................................................ 46
7.7 Display- ECOMILL ..................................................................................................................... 47
7.7.1 Display Parameters ..................................................................................................................................... 47
7.7.2 Description of Display Elements ................................................................................................................. 48
7.7.3 Function Key Description ............................................................................................................................ 48
7.8 CURVE 1.5 Program .................................................................................................................. 49
7.8.1 Description of Display Elements ................................................................................................................. 49
7.8.2 Stop Workout Markers................................................................................................................................ 50
7.8.3 Manual Workout ......................................................................................................................................... 50
7.8.4 Manage User(s) ........................................................................................................................................... 50
7.8.5 Custom Programs........................................................................................................................................ 52
7.8.6 Save Results ................................................................................................................................................ 56
7.8.7 Pacer Function ............................................................................................................................................ 59
7.8.8 Change Settings........................................................................................................................................... 60
7.9 CURVE 3.0 Program .................................................................................................................. 61
7.9.1 Introduction ................................................................................................................................................ 61
Program Views ........................................................................................................................................................... 62
7.9.2 Dashboard .................................................................................................................................................. 62
7.9.3 Trial End Points ........................................................................................................................................... 63
7.9.4 Pacer ........................................................................................................................................................... 63
7.9.5 Program Designer ....................................................................................................................................... 64
7.9.6 Graphs ......................................................................................................................................................... 65

08/2015 –UM-NT-EN-00 5
7.9.7 Report..........................................................................................................................................................66
7.9.8 Options ........................................................................................................................................................66
7.9.9 Data Collection............................................................................................................................................67
7.9.10 Calibration ...................................................................................................................................................68
7.9.11 Calibrating Vertical Force ............................................................................................................................69
8Accessories and Services ..................................................................................................... 70
9Cleaning and Maintenance ................................................................................................. 71
9.1 Cleaning ...................................................................................................................................71
9.2 Maintenance Intervals ..............................................................................................................72
9.2.1 Weekly Maintenance...................................................................................................................................72
9.2.2 Annual Maintenance ...................................................................................................................................72
9.3 Lubrication ...............................................................................................................................73
9.3.1 Bearings .......................................................................................................................................................73
9.3.2 Running Surface Belt134 .............................................................................................................................73
10 Warranty Information...................................................................................................... 74
11 Troubleshooting............................................................................................................... 75
11.1 Display Will Not Turn On .......................................................................................................75
11.2 Running Surface Belt is Stuck/Difficult to Move......................................................................75
11.3 Squeaking Sounds .................................................................................................................75
12 Maintenance Report ........................................................................................................ 76
13 Disposal Notice ................................................................................................................ 77
13.1 Batteries ...............................................................................................................................77
13.2 Device...................................................................................................................................77
14 Table of Figures ............................................................................................................... 78

608/2015 –UM-NT-EN-00
My WOODWAY_____________________________ arrived on __________________________
Model Name Date
WOODWAY History
WOODWAY’s history begins in Germany in 1974. Willi Schoenberger, a technical director in charge of planning a
fitness center, noticed that the most important piece of equipment, the treadmill, didn’t meet the most important
requirements: a mechanically sound machine that is designed to meet human needs.
He envisioned a comfortable walking surface that didn’t interfere with the natural biomechanics of running or
walking. Also, he wanted a transportation system which eliminated the friction associated with conventional con-
veyor-belt treadmills. After intensive research, and trial and error (and in cooperation with the Deutsche
Sporthochschule in Cologne, Germany), Willi developed and patented a very unique and revolutionary treadmill
design.
In 1975, WOODWAY GmbH was founded in Weil am Rhein, Germany. The name “WOODWAY” is derived from the
German “Waldweg” (“Wald” = wood and “Weg”= way), the feel of running on a soft pine needle covered path in
the forest.
In 1983, a manufacturing license was awarded to Sakai Medical, for the use of WOODWAY technology in the
Japanese marketplace.
In 1988, a U.S. license was granted to a small, well-established manufacturing company in Waukesha, Wisconsin.
WOODWAY USA was formed when the U.S. incarnation of the WOODWAY was developed and completed in 1990.
WOODWAY USA is proud to be the primary manufacturer of WOODWAY Treadmills worldwide, exporting treadmills
for international distribution, in addition to serving our domestic customers and clients.
Today, WOODWAY’s design and manufacturing facilities in the United States, Germany, and Japan make
WOODWAY the largest specialized treadmill manufacturer in the world. Constant enhancements in quality, design,
and function are shared and implemented by all three WOODWAY manufacturers.
As WOODWAY moves forward, attention to product quality, innovation, and customer service are at the forefront
of our efforts. Along with our treadmills, other products, services, and strategic relationships are being developed
so as to keep WOODWAY on the leading edge as we meet fitness training, testing, and rehabilitation needs.

7 08/2015 –UM-NT-EN-00
1Safety
1.1 Important Safety Instructions
The treadmill has been reliably designed, manufactured, and tested according to the
latest state of technology and is in safe and technically perfect condition. Nevertheless,
the device can cause risk to persons and property if operated improperly.
For this reason the operating instructions should be read completely and safety instruc-
tions must be observed.
Warnings attached directly to the device must be observed and kept in a legible condi-
tion.
Inappropriate use will result in the rejection of any liability or guarantee claims by
WOODWAY.
A safety sign has been included with your treadmill. It is the responsibility of the owner
to post this sign in a visible area near the machine.
All WOODWAY treadmills are built to the specifications of and are intended for both
commercial and residential use.
Read all instructions before using the treadmill.
DANGER- To reduce the risk of electrical shock:
Do not operate the heart rate monitor transmitter in conjunction with an electrical
heart pacemaker. The transmitter may cause electrical disturbances.
Do not soak the treadmill surfaces with any liquid; use a sprayer or damp cloth.
Do not place any open liquid containers on any part of the treadmill. The use of
sport bottles with closeable tops is acceptable.
Do not attempt to service your treadmill yourself without first contacting
WOODWAY Service.
Always keep the running surface clean and clear of obstructions.
CAUTION:
Consult your physician before beginning any exercise program, especially if any of
the following pertain to you: history of heart disease, high blood pressure, diabe-
tes, chronic respiratory disease, elevated cholesterol, smoker, experiencing any
other chronic disease or physical impairments.
Pregnant women should consult their physician before beginning an exercise pro-
gram.
If you experience dizziness, chest pain, nausea, or any other abnormal symptoms
while using the treadmill, stop training immediately. Consult a physician before
continuing.
A qualified mechanic should perform any service or repair work. It is preferable
that mechanics have successfully completed WOODWAY factory-authorized service
school or equivalent.
WARNING- To reduce the risk of injury to you and to others:
The treadmill is non-motorized. The user controls the speed, including the rate at
which the treadmill slows or comes to a stop. There is no motor on the treadmill,
therefore there is no emergency stop pull cord or lanyard. The treadmill will come
to a stop on its own. It is imperative that all users familiarize themselves with the
treadmill and its features.
The belt moves freely- always mount and dismount the treadmill from the rear of
the treadmill. Use the handrails at all times when mounting and dismounting from
the rear.
Set up and operate the treadmill on a solid, level surface.

808/2015 –UM-NT-EN-00
Keep all loose clothing and towels away from the running surface. It is also im-
portant that shoe laces do not extend beyond the bottom of the shoe.
Keep the area behind treadmill clear and at least 78” (2 m) from walls or furniture.
Keep hands away from all moving parts.
Never leave children unsupervised while on or near the treadmill.
Inspect the treadmill for worn or loose components prior to use. Tighten or replace
any worn or loose components prior to use. Read, understand, and test all emer-
gency stop procedures.
Always use the emergency safety pull cord supplied with the treadmill. It can be
clipped to an article of clothing while training. This is for the user’s safety in case
of an emergency.
WOODWAY treadmills are built to handle runners weighing up to 800 lbs. (360 kg)
at speeds between 0-4 MPH (0-6.5 km/h) and 400 lbs. (180 kg) at speeds up to 18
MPH (29 km/h).
The treadmill running belt might not stop immediately if an object becomes caught
in the belt or rollers.
Care should be taken when mounting and dismounting the treadmill. Never mount
or dismount the treadmill while the running belt is moving. Use the handrails
whenever practical or necessary.
Wear proper athletic shoes with rubber or high-traction soles. Do not use shoes
with heels or leather soles. Ensure no stones are embedded in the profile of the
soles.
Allow several minutes to bring your heart rate into the training zone depicted in
the manual. Walk slowly after your workout to allow your body sufficient time to
cool down and your heart rate to decrease.
The safety and integrity designed for the machine can only be maintained when
the treadmill is regularly examined for damage and/or wear and repaired if neces-
sary. It is the sole responsibility of the user/owner or facility operator to ensure
that regular maintenance is performed. Worn or damaged components should be
replaced immediately or the treadmill should be removed from service until the re-
pair is made. Only manufacturer-supplied or approved components should be used
to maintain and repair the treadmill.
SAVE THESE INSTRUCTIONS
1.2 Description of Warning Notices
Warning notices indicate potential hazards or safety risks. They are indicated in this
manual by a color-coded signal word panel (symbol with the appropriate signal word).
All warning notices have the same design and the same standardized content design.
1.2.1.1 Sample of a Warning Notice
SIGNAL WORD
Warning Text, Type, and Source of Danger
Description of the consequences of ignoring the danger
►Measures, instructions and forbidden actions to avoid the hazard
►Further measures...

08/2015 –UM-NT-EN-00 9
1.2.1.2 Classification
NOTE
NOTE or ATTENTION (no danger symbol)
No risk of injury, pertinent information and warning
against material damage
CAUTION
CAUTION (with danger symbol)
Slight possibility of injury
WARNING
WARNING (with danger symbol)
In a dangerous situation, serious accident possible
with the possibility of injury or death
DANGER
DANGER (with danger symbol)
In the event of an accident, immediate danger of
death or serious injury
1.3 Safety Notices on Device
Replace the safety stickers if they become damaged or illegible.
Safety relevant information is identified on the device using the following stickers:
Use Care When Using the Non-
Motorized Treadmill
Notice on free movement in the
direction of the arrow, and on mount-
ing and dismounting the treadmill is
located on the back right side panel
(running direction).
Ensure Proper Health Condition
Before Use
Consult a physician before use and
discontinue training in case of health
problems. This notice is located on the
front left side panel (running direc-
tion).
Warning to Not Tension Belt
To prevent incorrectly tensioning
running belt and causing damage or
injury, call WOODWAY for proper
instruction or to set up an appoint-
ment with a service technician. This is
located just inside the treadmill side
covers.

10 08/2015 –UM-NT-EN-00
Store EMERGENCY OFF Magnet
Out of Reach of Children
(ECOMILL)
If the device is not in use, the
EMERGENCY OFF magnet with safety
line and clip are to be stored out of
the reach of children.
Consult Physician Before Using
(ECOMILL)
Consult your physician or trainer
before using the treadmill. This cau-
tion label is located on the bottom left
of the ECOMILL display.
Secure EMERGENCY OFF Magnet
(ECOMILL)
This is an information sign on mount-
ing the EMERGENCY OFF magnets and
for securing the safety line to the user.
It is located on the bottom middle of
the ECOMILL display.
Stop Training if Dizzy or Out of
Breath (ECOMILL)
Stop training if you do not feel well or
are out of breath. This is located on
the bottom right of the ECOMILL
display.
Non-Motorized Treadmill Running
Belt Moves Freely (ECOMILL)
Notice on free movement of the
treadmill running belt is located on the
right of the ECOMILL display.
Safety Notice for Fuse Change
To prevent fire hazard, only replace
fuses with the same type and power
fuses. Remove the device from the
mains before changing. This notice is
located near the fuse inside the body
of the treadmill.

08/2015 –UM-NT-EN-00 11
1.4 Health Risks
WARNING
Health Hazards for Certain Groups of People!
The use of the non-motorized treadmill can pose health risks for certain peo-
ple.
►Before using the device, check the following list for limitations which may
apply to you. If so, the specified measures must be adhered to.
Persons with Medical Conditions
Before beginning an exercise program, consult your physician, especially if any of the
following apply to you:
History of heart disease
High blood pressure
Diabetes
Chronic respiratory illness
Elevated cholesterol levels
Smoker
Other chronic illnesses or physical impairments
Pregnancy
Pregnant women must consult a physician before starting a training program.
Symptoms During Training
Should you experience dizziness, chest pain, nausea, or any other abnormal symptoms
while training on the treadmill, stop training immediately. Consult a physician prior to
continuing training.
1.5 Intended Use
WARNING
Danger from Improper Use!
Any improper use and/or other use of the device can lead to dangerous situa-
tions with significant personal injury and/or property damage.
►Only use the treadmill for its intended use.
►Avoid excessive training, as this can lead to injury.
►Read and strictly adhere to all information in the operating instructions.
The CURVE, CURVE XL, CURVE 1.5, CURVE 3.0, and ECOMILL are non-motorized
treadmills. They are intended for fitness training, to increase stamina and physical fit-
ness, and can be used for running or walking.
The operating instructions are an integral part of the device and are to be available to
all users at all times. The exact observance of the instructions is a prerequisite for the
intended use of the WOODWAY device.

12 08/2015 –UM-NT-EN-00
WARNING
Risk of Injury Through Risk of Falling!
The free-running treadmill presents the danger of falling.
►Familiarize yourself with the treadmill operation and operating principles
before the first training.
►Always use the safety handrail when mounting and dismounting and when
starting training.
►Never leave children or animals near the treadmill unsupervised.
ATTENTION
Claims to the manufacturer of any kind due to damage from improper use are
excluded.
The representative alone is liable for all damages resulting from improper use.
1.6 Unauthorized Modes of Operation
The treadmill may only be used for the aforementioned intended use. Any additional
uses may result in serious personal injury and/or property damage.
The following restrictions and prohibitions must be strictly adhered to:
The non-motorized treadmills may not be used without prior instruction by qualified
personnel.
Children may not use the device or be left near the device unattended.
The use of the treadmill under the influence of alcohol or drugs and/or narcotics is
prohibited.
The treadmill may not be used for animals.
Walking surface is not suited for the use of running shoes with spikes or studs.
It is forbidden to use the treadmill without its safety rail or with walking poles.
The operation of the WOODWAY treadmill outside of the named ambient conditions
in the section “Setup and Installation” (temperature, humidity, air pressure) as well
as outdoors (i.e. outside of closed rooms) is not allowed.
For people with health limitations or contraindications (see previous section), the
use of the treadmill without prior consultation by a health care professional is pro-
hibited.
When stepping onto the treadmill, during exercises, and when stepping off of the
device, the safety instructions in this manual must be observed. Here, the following
restrictions apply:
-Never jump onto the treadmill.
-Never jump off of the treadmill.
-Never enter the device from the front.
-Never stop walking when the belt is moving.
-Never turn around when the belt is moving.
-Never walk sideways or backwards.

08/2015 –UM-NT-EN-00 13
WARNING
Unauthorized Use Can Cause Injury!
Using the non-motorized treadmill in a manner not authorized by WOODWAY
can be potentially hazardous.
►Only use the treadmill for its intended use as described in the manual.
►Do not use unauthorized replacement parts or accessories that could inter-
fere with the functionality or safety of the device.
►Always use the safety handrail when mounting and dismounting and when
starting training.
►If the device is damaged or not functioning properly, do not use it until it
has been inspected and/or repaired by qualified and authorized personnel.
2Introduction
2.1 Operating Instruction Information
This manual provides information on the safe operation of the non-motorized treadmills.
A condition for safe operation is compliance with all safety and operating instructions.
2.1.1.1 Read and Observe the Operating Instructions!
Read these instructions carefully before beginning any work on the treadmill. It is a part
of the device and must be kept accessible at all times and in the immediate vicinity of
the treadmill for operating and maintenance personnel.
CAUTION
Improper Operation Can Cause Accidents!
Not using the treadmill as intended according to the manufacturer's instruc-
tions can cause accidents and equipment damage.
►These operating instructions must be completely read and understood be-
fore using the treadmill.
►Keep these instructions close at hand for all users of the device.
WOODWAY accepts no liability for accidents, equipment damage, and consequences of
equipment failure that are a result of failure to follow the operating instructions. In ad-
dition, local accident prevention regulations and general safety conditions for intended
use of the treadmill apply.
The manufacturer reserves the right to make technical changes in the context of im-
proving the performance properties and further development without prior notice. Illus-
trations are for basic understanding and may differ from the actual design of the device.
Accessories from other suppliers have further safety regulations and guidelines which
must also be observed. WOODWAY accepts no liability for accidents, equipment dam-
age, and personal injury caused by the use of accessories from other suppliers.
Observe the
Instructions

14 08/2015 –UM-NT-EN-00
2.2 Limitation of Liability
All information and instructions in this manual have been compiled in accordance with
applicable standards and regulations, the current state of technology, and our
knowledge and experience.
WOODWAY accepts no responsibility for damages resulting from:
Disregarding the operating instructions
Improper use
Use by non-authorized persons
Use of replacement parts which were not approved by WOODWAY
Unauthorized modifications to the device or accessories
WOODWAY general terms and conditions and delivery conditions apply, as well as the
legal regulations valid at the time of contract conclusion.
2.3 Copyright
The release of the operating instructions to third parties without the written permission
of WOODWAY is prohibited.
NOTE
All contents, text, drawings, images, or other illustrations are copyright pro-
tected and are subject to intellectual property rights.
Any misuse is punishable by law.
Duplication in any manner and form - including excerpts - as well as use and/or com-
munication of the content are not permitted without written permission from
WOODWAY.
2.4 Replacement Parts
WOODWAY recommends the use of original replacement parts. Original replacement
parts have particular qualities and ensure reliable and safe operation:
Developed for specific use with the device
Manufactured for high quality and excellence
Ensure the legal warranty period (excluding wear parts) or other reached agree-
ments
NOTE
The use of NON-original replacement parts may change the characteristics of
the device and interfere with the safe use!
WOODWAY does not accept liability for damages resulting from this.
Wear parts are considered hazardous waste!
After being replaced, wear parts must be disposed of according to country-specific
waste laws.
For further information on disposal, see Section 13 Page 77.
Disposal

08/2015 –UM-NT-EN-00 15
2.5 Customer Service
For service questions contact the following:
WOODWAY USA, Inc.
W229 N591 Foster Ct.
Waukesha, WI 53186
USA
Tel: [phone]
Fax: [phone]
E-Mail: [email protected]
Web: www.WOODWAY.com
For faster processing of your request please have the following data and information
available:
Information on the name plate (specific model/serial number)
An accurate description of the circumstances
Customer number (if available)
What action has already been taken?
The address of your local service center can be obtained from the manufacturer. After
repair or re-installation, the actions listed under "Setup and Installation" are to be per-
formed as during installation.
Contact
Servicing

16 08/2015 –UM-NT-EN-00
3Technical Data
3.1 Name Plate
Each WOODWAY treadmill receives a serial number during production. Depending on
the year of your model, it has an alphanumeric code with 7-8 characters or a numeric
code with 9 digits. The serial number can be found on the name plate, which is mount-
ed on the front left of the treadmill frame.
The name plate contains the device's main technical details.
The treadmill range of functions is stated the name plate and on the delivery note.
For service questions, the technical information on the name plate must be kept handy.
Fig. 1 Name plate
1. Manufacturer name, address, and
logo
2. Serial no.
3. Model no.
4. Product code
5. Information on electrical connection
6. Max. user weight load
7. Device CE symbol (with number of
the named position), note to read
and observe operating instructions,
and year manufactured
8. Usage class, accuracy class, and
enclosure rating
9. Patent protection note
10. 2D universal identification number
code
Keep Handy
for Questions

08/2015 –UM-NT-EN-00 17
3.2 Technical Specifications
Specification
CURVE, CURVE
1.5, CURVE 3.0
CURVE TRAINER
ECOMILL
CURVE XL
Overall
Dimensions
33” W x 67” L x
66.55” H
84 x 170 x 169 cm
33” W x 67” L x
66.55” H
84 x 170 x 169 cm
33” W x 68” L x
66.55” H
84 x 170 x 169 cm
38” W x 91” L x
75” H
96 x 230 x 191 cm
Running Surface
17” W x 56” L
(43 x 142 cm)
60 slats
17” W x 56” L
(43 x 142 cm)
60 slats
17” W x 56” L
(43 x 142 cm)
60 slats
22” W x 86” L
(55 x 218 cm)
77 slats
Unit Weight
355 lbs. (161 kg)
350 lbs. (159 kg)
445 lbs. (202 kg)
550 lbs. (250 kg)
Shipping Weight
440 lbs. (200 kg)
440 lbs. (200 kg)
533 lbs. (242 kg)
625 lbs. (284 kg)
Drive System
112 bearings
12 roller guides
112 bearings
12 roller guides
112 bearings
12 roller guides
158 bearings
18 roller guides
Heart Rate Meas-
urement
1-channel ECG
accurate, compat-
ible chest strap
(accessory)
1-channel ECG
accurate, compat-
ible chest strap
(accessory)
Touch grip pick-
up, POLAR com-
patible receiver
1-channel ECG
accurate, compat-
ible chest strap
(accessory)
Speed
(Manually Driven)
0 –No Max.
0 –No Max.
0 –15 MPH
(0 –24 km/h)
0 –No Max.
Slat Type
Replaceable
Thermoplastic on composite T-sections
Replaceable
Rubber on alumi-
num T-sections
Lateral Movement
+/- 4 mm
Running Surface
Hardness
Approx. 40 Shore A
Max. User Weight
Running / Walking
400 lbs. (180 kg) / 800 lbs. (360 kg)
Running Surface
Above Floor
11” (28 cm)
Ambient
Conditions
(Operation)
Temperature: 50°F to 104°F (10°C to 40°C)
Relative humidity: 20 - 95% (not condensed)
Air pressure: 700 - 1060hPa
Enclosure Rating
IP2X
Drive Motor
N/A (manually driven)

18 08/2015 –UM-NT-EN-00
3.3 Power Requirements
All versions of the CURVE are non-motorized and therefore do not require electricity
from a wall outlet. Note that the computer will require a power source to operate.
The battery-operated display automatically detects the user moving the belt and
switches off automatically when no training activity has been detected for 8 minutes.
The ECOMILL is non-motorized and therefore does not require electricity from a wall
outlet. The display is powered up by the user moving the belt.
The display utilizes a battery back-up to ensure uninterrupted use and will switch off
automatically when no training activity has been detected for 2 minutes.
The ECOMILL has a power switch located on the lower middle of the running base. This
power switch enables the battery back-up system and must be in the ON position.
3.4 Dimensions
Fig. 2 Device dimensions, CURVE / CURVE 1.5 / CURVE 3.0
CURVE / CURVE XL
ECOMILL

08/2015 –UM-NT-EN-00 19
Fig. 3 Device dimensions, CURVE TRAINER
Fig. 4 Device dimensions, CURVE XL

20 08/2015 –UM-NT-EN-00
Fig. 5 Device dimensions, ECOMILL
4Transportation and Storage
4.1 Safety Notices for Transportation
Check the treadmill for damage upon arrival. Also check and compare supplied accesso-
ries with the corresponding delivery note.
The manufacturer is not liable for damages and missing parts if this information was not
recorded in writing on the delivery note upon delivery of the unit. Damage or defects
must be reported to the carrier and to the responsible WOODWAY dealer immediately.
WARNING
Risk of Injury by Machine Falling or Falling Over!
Improper transportation of the device may lead to it falling over and causing
injury or equipment damage.
►Only transport in compliance with the safety regulations.
►Only use the supplied carrying tubes for transport.
►Never lift the device using the railing or protective coverings.
►Ensure stable center of gravity and steadiness during transportation.
If necessary, transport or relocation can be organized and carried out by authorized
WOODWAY service partners. For further information please contact WOODWAY Cus-
tomer Service.
WOODWAY Service