Woosim Systems WSP-i450 User manual

http://www.woosim.com
MODEL WSP-i450
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
(4inch Industrial Printer)
Rev. 1.0

WSP-i450 Rev. 1.0
http://www.woosim.com 2
 Copyright
WSP-i450 4inch Industrial printer operator’s manual.
Copyright ⓒ2009 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
and may not be reproduced in whole or in part without the prior written permission of
Woosim Systems Inc.
 Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
 Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer “OFF”, before you connect or removed the cable on the rear side, in
order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”
 Notice
The contents of this manual are subject to change without notice.
All specifications are subjected to change without notice

WSP-i450 Rev. 1.0
http://www.woosim.com 3
 Introduction
The WSP-i450 is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile computing etc.
The general features of WSP-i450 printer are as follows:
XPocket size 151.5×135.7×63.5mm (MSR : 151.5 X 142.5 X 63.5)
XLight weight(550g) for true mobility [standard]
XVery silent printing thru direct thermal printing method
XHigh speed (60mm/sec, MAX)
XHigh resolution(203dpi : 8dots/mm).
XUART(RS-232C or TTL), Bluetooth Ver2.1
Wireless LAN (IEEE802.11b/g) interface
XSupport Magnetic Stripe Reader
XSupport Graphic LCD(128×32dots) with Blue LED Backlight
XIntuitive LED’s indicate Power(on/off),Error and Battery status
XSupport text and graphic printing
XEasier paper roll loading by CLAMSHELL design
XOne touch paper cover
XPrinter door open & Paper-out sensor
XEasier maintenance with self-diagnostic.
XIn field programming – Update Firmware, Download Fonts and Logos
XCompack and easy to carry around.
XWater-resistant construction.( IP54 – Certified )
XMicrosoft Windows 98 /ME /2000 / XP / VISTA / 7 compatible.
XFlow control : Software (XON/XOFF)
※Hardware flow control not supported in printer.
XFree fall: 1 meter onto concrete (option 1.5 meter)
XAgency Approvals

WSP-i450 Rev. 1.0
http://www.woosim.com 4
 Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of
the printer.
XUsing the Printer
●Be careful not to drop or bump the printer on a hard surface.
●Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆Operating temperature :-10°C to 50°C
◆Relative humidity : 0% to 90% (No condensation)
●Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
●Do not open the platen cover during printing .
●Do not remove or reinstall the communication cable during printing
or transmission.
●Do not touch the connectors of the communication during printing.
●Switch the POWER OFF when not in use.
●Do not use alcohol or other solvent.
●The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
●When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
XThermal Paper Handling
●Store the thermal paper in a cool, dry and dark place.
●Do not rub the paper with hard object.
●Do not leave the paper with hard object.
●Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
●Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
●Do not use chemical glue.
●Always use the clean thermal paper.

WSP-i450 Rev. 1.0
http://www.woosim.com 5
 Note

WSP-i450 Rev. 1.0
http://www.woosim.com 6
CONTENTS
1. Outline............................................................................................................................................7
1.1. Model classifications. ...............................................................................................................7
1.2. Product Part Number System....................................................................................................7
1.3. Specifications............................................................................................................................8
2. Setting up the printer...................................................................................................................10
2.1. Printer & Accessories .............................................................................................................10
2.2. Printer Features.......................................................................................................................11
2.3. Replacing paper roll................................................................................................................13
2.4. Power supply ..........................................................................................................................14
2.4.1. Specified power supply. ...................................................................................................14
2.4.2. Installing the battery and the belt strap ............................................................................14
2.4.3. Recharging the battery pack.............................................................................................15
2.5. Set operation mode. ................................................................................................................16
3. Interface........................................................................................................................................22
3.1. UART(RS-232C or TTL)........................................................................................................22
3.2. Bluetooth ................................................................................................................................23
3.3. Wireless LAN .........................................................................................................................23
4. Smart Card Module.....................................................................................................................24
4.1. General Spec...........................................................................................................................24
4.2. Communication Protocol Sequence........................................................................................25
4.2.1. Regular Operation............................................................................................................25
4.2.2. Irregular Operation (Communication Error)....................................................................25
5. Using the printer..........................................................................................................................26
5.1. Control panel. .........................................................................................................................26
5.2. The self test.............................................................................................................................27
6. Consumable Parts........................................................................................................................28
6.1. Recommended paper...............................................................................................................28
5.2. Printing position......................................................................................................................28

WSP-i450 Rev. 1.0
http://www.woosim.com 7
1
1. . O Ou ut tl li in ne e. .
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s. .
1
1. .2 2. . P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m. .
WSP-i450 ( ) ( )
Model
Interface
None: UART/Bluetooth
A2 : UART/IrDA
Power
None : DC 8.4V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
S40
SC30
W25
.
.
.
Wired Wireless
A RS-232C 1 Bluetooth
B TTL 2 IrDA
C USB 0 None
D RS-485
E Parallel
Z None

WSP-i450 Rev. 1.0
http://www.woosim.com 8
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s. .
Item Specifications
Print method Direct thermal line printing
Characters per line Eng : 92cpl (MAX)
Character size Eng. : 9×24dots, 12×24dots Kor. : 16×24dots, [24×24dots]
Optional Characters Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish,
Greek, Japanese, Persian, Latin9 and Others upon request.
Resolution 203dpi, 8 dots/mm
Print width 4-inch ( 104mm, 832dots)
Print speed 60mm / sec (MAX)
Dimension 151.5× 135.7 × 63.5 mm (MSR : 151.5 X 142.5 X 63.5mm)
Weight 550g (Including battery & roll paper) [standard]
556g (Including battery & roll paper) [MSR]
Interface UART(RS-232C or TTL), Bluetooth Ver 2.1 + EDR
Wireless LAN interface(IEEE802.11b/g)
Paper roll Thermal roll paper ( 113mm wide, 50ø)
Barcodes 1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN, KAN,
JAN, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix
Black mark Support black mark detection
H/W Spec. MCU : 32bits RISC, FLASH : 4M bytes, RAM : 8M bytes
Receive buffer size 1M bytes
MSR ISO 7810 / 7811 / 7812 1&2&3 Track Reading
Smart Card Reader ISO 7816 Compliant (EMV level 1 Certified) /
T=0, T=1 support / 1 SAM (Security Application Module)
LCD 128×32 Dots FSTN (Blue LED Backlight)
Battery Rechargeable 7.4V DC, 2,200mAh (Li-ion)
Battery duration 1 hour continuous printing
(Continue…)

WSP-i450 Rev. 1.0
http://www.woosim.com 9
< Table 1 >
Item Specifications
Battery charger Input (100~250V AC, 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time
Temperature -10°C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Environment
conditions Humidity 30% - 80% (operating)
0% - 95% (storage)
Mechanical 37,000,000 lines
MCBF(Mean Cycle
Between Failure) Head Approximately 50 Km

WSP-i450 Rev. 1.0
http://www.woosim.com 10
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r. .
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
Your printer box should include these items. If any items are damaged or missing, please
contact your dealer for assistance.
Communication cable
Battery charger adaptor
Shoulder band
MSR
Thermal roll paper
Battery pack
WSP–i450
SAM Connector Smart Card

WSP-i450 Rev. 1.0
http://www.woosim.com 11
2
2. .2 2. . P Pr ri in nt te er r F Fe ea at tu ur re es s
▶Part Name

WSP-i450 Rev. 1.0
http://www.woosim.com 12
▶Dimensions

WSP-i450 Rev. 1.0
http://www.woosim.com 13
2
2. .3 3. . R Re ep pl la ac ci in ng g p pa ap pe er r r ro ol ll l. .
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover by placing your fingers under the paper cover lock and pull a paper
cover lock open.
3. Insert a new paper roll as shown.
4. Tear the excess paper off using the edge of paper door as a tear bar.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because
the printer can not detect the paper end correctly.

WSP-i450 Rev. 1.0
http://www.woosim.com 14
2
2. .4 4. . P Po ow we er r s su up pp pl ly y
2
2. .4 4. .1 1. . S Sp pe ec ci if fi ie ed d p po ow we er r s su up pp pl ly y. .
2
2. .4 4. .2 2. . I In ns st ta al ll li in ng g t th he e b ba at tt te er ry y a an nd d t th he e b be el lt t s st tr ra ap p
** BATTERY**
①To install battery pack, proceed as follows:
- Insert the Battery pack in the direction of the arrow.
②Reverse the order to remove the battery pack.
** BELT STRAP **
NOTE : ●Before installing or removing the battery pack, ensure the printer is OFF.
●If the printer is not used for long period of time, remove the battery pack
from the printer.
The following specification is requested for Power supply.
Battery Charger : DC 8.4V/0.8A
Avoid using power supply which its power capacity of power current is extremely high.

WSP-i450 Rev. 1.0
http://www.woosim.com 15
2
2. .4 4. .3 3. . R Re ec ch ha ar rg gi in ng g t th he e b ba at tt te er ry y p pa ac ck k
For recharging the battery pack, install the battery pack in the printer.
Insert the Battery Charger to the charge connector of the printer.
NOTE : ●While charging the printer, turn off the printer power.
●Do not remove the battery during charging.
●The battery is consumable parts and when purchasing, compared to the
use hour is gradually decreases. (Warranty 6 month)
●If the printer is not used for a long time, unplug the power cord
from the printer and outlet.
●The recharging time depends on the voltage level and ambient
temperature of the battery. Normally, if takes about 4 to 5 hours to
recharge a battery pack.
●You must use only the supplied adapter.
●Red Lamp : charging the battery.
Green Lamp: charging is finished.

WSP-i450 Rev. 1.0
http://www.woosim.com 16
2
2. .5 5. . S Se et t o op pe er ra at ti io on n m mo od de e. .
Change the mode and option using the mode Code.
zMODE button : changing Printer MODE status. (Error Lamp)
zFEED button : changing OPTION status.
[Example] The defaults of the printer are :
UART / 9600 bps / 8 data bit / No parity /1 stop bit / Density low / Quality low
/ Mark use / Sensor low / Power down 5 minute
If a user wants to modify the defaults with
Bluetooth / 57,600 bps / 7 data bit / Odd parity /2 stop bit / Density high / Quality high
/ Mark no use / Sensor medium1 / Power down no use
XPress MODE Button and FEED button during the Error Lamp flickers 5 times.
→You will see present COMMUNICATION mode in the LCD.
→Press the MODE Button twice.
And then, interface mode has set to Bluetooth mode.
XWhen you press FEED button once.
→You will see present BAUD RATE mode in the LCD.
→Press MODE Button 3 times.
And then, baudrate has set to 57,600 bps.
XWhen you press FEED button once.
→You will see present DATA BIT mode in the LCD.
→Press MODE Button once.
And then Data Bit has set to 7 data bit.
XWhen you press FEED button once.
→You will see present PARITY mode in the LCD.
→Press MODE Button once.
And then the Parity bit has set to Odd parity bit.
XWhen you press FEED button once.
→You will see present STOP BIT mode in the LCD.
→Press MODE Button once.
And then the density has set to 2 stop bit.

WSP-i450 Rev. 1.0
http://www.woosim.com 17
XWhen you press FEED button once.
→You will see present DENSITY mode in the LCD.
→Press MODE Button twice.
And then the density has set to Density high.
XWhen you press FEED button once.
→You will see present Quality mode in the LCD.
→Press MODE Button once.
And then the quality has set to Quality high.
XWhen you press FEED button once.
→You will see present MARK mode in the LCD.
→Press MODE Button once.
And then the mark has set to Mark no use.
XWhen you press FEED button once.
→You will see present SENSOR mode in the LCD.
→Press MODE Button once.
And then the sensor has set to Sensor medium1.
XWhen you press FEED button once.
→You will see present PWDN mode in the LCD.
→Press MODE Button once.
And then the Power down has set to Power down no use.
If all the mode have set, press the MODE Button and the FEED Button at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(Bluetooth / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high / Quality high
Mark no use / Sensor medium1 / Power down no use)
If the status is not correct, please try it again according to the procedure.

WSP-i450 Rev. 1.0
http://www.woosim.com 18
* Bluetooth Version
POWER Lamp
(Green)
ERROR Lamp
(Red) Option
1 UART(RS-232C)
2 Protocol UART(RS-232C)
3 Bluetooth
Communication
Port 1
4 Protocol Bluetooth
1 9600 bps
2 19200 bps
3 38400 bps
4 57600 bps
Baud Rate 2
5 115200 bps
1 7 Data bit
Data Bit 3 2 8 Data bit
1 No Parity
2 Odd Parity
Parity Bit 4
3 Even Parity
1 1 Stop bit
Stop Bit 5 2 2 Stop bit
1 Density Low
2 Density Medium
Density 6
3 Density High
1 Low
Quality 7 2 High
(Continue…)

WSP-i450 Rev. 1.0
http://www.woosim.com 19
POWER Lamp
(Green)
ERROR Lamp
(Red) Option
1 No use
Mark 8 2 Use
1 Low
2 Medium1
3 Medium2
Sensor 9
4 High
1 No use
2 1 minute
3 2 minute
4 3 minute
5 4 minute
Power Down 10
6 5 minute
< Table 2 >

WSP-i450 Rev. 1.0
http://www.woosim.com 20
* WLAN Version
POWER Lamp
(Green)
ERROR Lamp
(Red) Option
1 UART(RS-232C)
2 Protocol UART(RS-232C)
3 WLAN
Communication
Port 1
4 Protocol WLAN
1 9600 bps
2 19200 bps
3 38400 bps
4 57600 bps
Baud Rate 2
5 115200 bps
1 7 Data bit
Data Bit 3 2 8 Data bit
1 No Parity
2 Odd Parity
Parity Bit 4
3 Even Parity
1 1 Stop bit
Stop Bit 5 2 2 Stop bit
1 Density Low
2 Density Medium
Density 6
3 Density High
1 Low
Quality 7 2 High
(Continue…)