Worker 12685 Authico User manual

USER MANUAL –EN
IN 12685 Scooter WORKER Authico
IN 12686 Scooter WORKER Nuvola

2
CONTENTS
SAFETY INSTRUCTIONS....................................................................................................................... 3
RIDING TECHNIQUE.............................................................................................................................. 3
ASSEMBLY / DISASSEMBLY................................................................................................................. 3
MAINTENANCE ...................................................................................................................................... 4
ENVIRONMENT PROTECTION ............................................................................................................. 4
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS................................................... 4

3
EN 14619, class A
Congratulation!
You have just bought a high-quality scooter with which you will have a lot of fun. Below are given the
instructions and recommendations that need to be followed when using a scooter to give you a long
lifespan and service. Read the entire manual before riding your scooter for the first time and keep it for
future reference.
SAFETY INSTRUCTIONS
•Only one person can ride the scooter at the same time. Maximum user weight: 100 kg.
•Children may only use the scooter under adult supervision.
•Ride the scooter only in safe places, i.e., on a flat, clean, and dry surface with plenty of free
space. Do not ride the scooter on public roads.
•Beginners will suffer most injuries during the first ten minutes of the ride. Before riding check:
that all screw and clamps are tighten, the folding and safety mechanisms are secured,
handlebar grip is properly mounted, and wheel is properly mounted and secured. All parts
must be properly secured and must not show signs of mechanical damage or wear.
•The brake heats up during braking, do not touch the brake after braking.
•Wear protective equipment - helmet and knee, elbow and wrist protectors.
•Do not ride the scooter in low visibility and after dusk.
•After driving, check the condition of the parts (especially the connecting material) again and
make sure that the parts have not come loose, broken and that they are not dirty with dirt, oil
or tar and show no signs of wear. The scooter must be fully functional before each ride.
•If you want to ride on public roads, familiarize yourself with local rules and regulations.
•Do not overestimate yourself and take extra care while driving.
•Wear sports shoes to ride a scooter.
RIDING TECHNIQUE
The technique is the same as on a classic scooter: to move the scooter, stand on one step with one
foot and bounce off the ground with the other foot.
To brake, place the foot on the rear fender, which serves as a friction brake. The braking effect
depends on the force of depressing the fender.
ASSEMBLY / DISASSEMBLY
ASSEMBLY
The scooter must be properly assembled before riding.
1. Pull up the plastic lock.
2. Open the scooter until the lock clicks.
3. Remove the handles from the holder and slide them into the handlebars.
4. Important! The spring pins on the handles must pass through the holes in the handlebars (see
Pic. 4).
5. Unclip the quick release clamp and adjust the desired handlebar height. Spring pin on the
handlebar it must pass through one of the holes in the post (see Pic. 5).
6. Secure the handlebar with quick release clamp.

4
7. Before riding, make sure that the stand is properly retracted - it is not in contact with the
ground.
DISASSEMBLY
During disassembly, proceed in the opposite way to assembly.
MAINTENANCE
Bearings: As the scooter is equipped with high quality ball bearings, there is no need for special
maintenance of the bearings. Ball bearings are only cleaned from the outside. If the bearings become
dirty, they can be cleaned when changing the wheels with a cotton cloth. The bearing housing should
be protected against dirt.
Wheels: To replace the wheels, unscrew the Allen screw (size 5) and remove the wheel. We
recommend replacing the bearings when replacing the wheels. Insert the bearings into the new wheels
- don't forget to place the center spacer - and fasten the wheels with Allen screws. Tighten the Allen
screws properly.
For safety reasons, perform regular maintenance on all components (if necessary lubricate bearings,
replace wheels, etc.).
Regular maintenance increases the safety of your scooter. Carry out regular checks on the tightening
of the lock nuts and all fasteners. Replace the part if it is worn or damaged.
Do not make any modifications to the scooter that are not recommended by the manufacturer.
ENVIRONMENT PROTECTION
After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the
local laws and environmentally friendly in the nearest scrapyard.
By proper disposal you will protect the environment and natural sources. Moreover, you can help
protect human health. If you are not sure in correct disposing, ask local authorities to avoid law
violation or sanctions.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated here under determine Warranty Coverage and Warranty Claim
Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 89/2012 Coll. Civil
Code, and Act No. 634/1992 Coll., Consumer Protection, as amended, also in cases that are not
specified by these Warranty rules.

5
The seller is SEVEN SPORT s.r.o. with its registered office in Strakonická street 1151/2c, Prague 150
00, Company Registration Number: 26847264, registered in the Trade Register at Regional Court in
Prague, Section C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not
conclude and execute the Contract in order to run or promote his own trade or business activities.
“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the
purpose of using the Goods or services for his own business activities. The Buyer conforms to the
General Purchase Agreement and business conditions.
These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement
made between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless
otherwise specified in the Purchase Agreement, in the Amendment to this Contract or in another
written agreement.
Warranty Conditions
Warranty Period
The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in
the Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The legal
warranty period provided to the Consumer is not affected.
By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a
certain period of time, suitable for regular or contracted use, and that the Goods shall maintain its
regular or contracted features.
The Warranty does not cover defects resulting from (if applicable):
•User’s fault, i.e. product damage caused by unqualified repair work, improper assembly,
insufficient insertion of seat post into frame, insufficient tightening of pedals and cranks
•Improper maintenance
•Mechanical damages
•Regular use (e.g. wearing out of rubber and plastic parts, moving mechanisms, joints, wear of
brake pads/blocks, chain, tires, cassette/multi wheel etc.)
•Unavoidable event, natural disaster
•Adjustments made by unqualified person
•Improper maintenance, improper placement, damages caused by low or high temperature,
water, inappropriate pressure, shocks, intentional changes in design or construction etc.
Warranty Claim Procedure
The Buyer is obliged to check the Goods delivered by the Seller immediately after taking the
responsibility for the Goods and its damages, i.e. immediately after its delivery. The Buyer must check
the Goods so that he discovers all the defects that can be discovered by such check.
When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase
and validity of the claim by the Invoice or Bill of Delivery that includes the product’s serial number, or
eventually by the documents without the serial number. If the Buyer does not prove the validity of the
Warranty Claim by these documents, the Seller has the right to reject the Warranty Claim.
If the Buyer gives notice of a defect that is not covered by the Warranty (e.g. in the case that the
Warranty Conditions were not fulfilled or in the case of reporting the defect by mistake etc.), the Seller
is eligible to require a compensation for all the costs arising from the repair. The cost shall be
calculated according to the valid price list of services and transport costs.
If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is not accepted.
The Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim.
In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by
the Seller, the Seller shall fix the reported defects by means of repair or by the exchange of the

6
damaged part or product for a new one. Based on the agreement of the Buyer, the Seller has the right
to exchange the defected Goods for a fully compatible Goods of the same or better technical
characteristics. The Seller is entitled to choose the form of the Warranty Claim Procedures described
in this paragraph.
The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods,
unless a longer period has been agreed upon. The day when the repaired or exchanged Goods is
handed over to the Buyer is considered to be the day of the Warranty Claim settlement. When the
Seller is not able to settle the Warranty Claim within the agreed period due to the specific nature of the
Goods defect, he and the Buyer shall make an agreement about an alternative solution. In case such
agreement is not made, the Seller is obliged to provide the Buyer with a financial compensation in the
form of a refund.
CZ
SEVEN SPORT s.r.o.
Registered Office: Strakonická 1151/2c, Praha 5, 150 00, ČR
Headquaters: Dělnická 957, Vítkov, 749 01
Warranty & Service: Čermenská 486, Vítkov 749 01
CRN: 26847264
VAT ID: CZ26847264
Phone: [phone]
E-mail: [e-mail]
[e-mail]
[e-mail]
Web: www.inSPORTline.cz
SK
inSPORTline s.r.o.
Headquaters, warranty & service center: Električná 6471, Trenčín 911 01, SK
CRN: 36311723
VAT ID: SK2020177082
Phone: [phone]
E-mail: [e-mail]
[e-mail]
[e-mail]
Web: www.inSPORTline.sk