Worx WR147E.1 User manual

Owner’s manual
WR147E.1
WR148E
WR165E
WR167E
Original instruction

Table of contents EN
2
Welcome
Contact information
Safety first
Important safety instructions
Get familiar with Landroid
What’s in the box
Getting to know Landroid
How Landroid works
Getting started
Planning
Installation
Starting Landroid
Connecting Landroid to the Internet
Using the App
Maintenance
Keep it sharp
Keep it clean
Keep it charged
Keep it stored over the Winter
Keep it updated
Quick reference
Operation messages
Error messages
Trouble shooting
Technical data
Noise data and accessories
Declaration of conformity
p. 03
p. 04
p. 08
p. 09
p. 10
p. 12
p. 15
p. 20
p. 23
p. 24
p. 25
p. 26
p. 27
p. 27
p. 27
p. 29
p. 30
p. 33
p. 37
p. 38
p. 39
TABLE OF CONTENTS

Welcome EN
3
Thank you for purchasing a Worx Landroid Robot Mower.
Totally autonomous, fully configurable, agile and efficient, Landroid manicures your grass and gives you the best lawn ever. This manual
will help you get set up.
Support
www.worx-europe.com/support
Landroid Owner’s Site
https://account.worxlandroid.com/login
Customer Services Helpline
0345 202 9679
We’re here to help:

Safety first EN
4
PRODUCT SAFETY
GENERAL & ADDITIONAL SAFETY INSTRUSCTIONS
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe
operation of the machine. Save all warnings and instructions for future reference.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance contains batteries that are only replaceable by skilled persons.
WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
WARNING: To reduce the risk of injury to persons and damage to the machine, do not remove battery pack before switching off
the machine.
IMPORTANT
READ CAREFULLY BEFORE USE - KEEP FOR FUTURE REFERENCE
Safe operation practices
Training
• Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper use of the
appliance.
• Never allow people unfamiliar with these instructions or children to use the appliance. Local regulations can restrict the age of the
operator.
• The operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
• Ensure the correct installation of boundary wire as instructed.
• Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects.
• Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or
damaged blades and bolts in sets to preserve balance.
• On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate.
WARNING! The lawnmower should not be operated without the guard in place
OPERATION
1. General
• Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place.
• Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
• Never pick up or carry an appliance while the motor is running.
• Operate the disabling device from the appliance.
- Before clearing a blockage
- Before checking, cleaning or working on the appliance
• It is not permitted to modify the original design of robotic lawnmower. All modifications are made at your own risk.
• Start robotic lawnmower according to the instructions. When the power key is switched on, make sure you keep your hands and feet
away from the rotating blades. Never put your hands and feet under the mower.
• Never lift up robotic lawnmower or carry it when the power key is switched on.
• Do not let persons who do not know how robotic lawnmower works and behaves use the mower.
• Do not put anything on top of robotic lawnmower or its charging station.
• Do not allow robotic lawnmower to be used with a defective blade disc or body. Neither should it be used with defective blades,
screws, nuts or cables.
• Always switch off robotic lawnmower when you do not intend to use the mower. Robotic lawnmower can only start when the power
key is switched on and the correct PIN code has been entered.

Safety first EN
5
• Keep your hands and feet away from the rotating blades. Never place your hands or feet close to or under the body when robotic
lawnmower is in operation.
• To avoid using the machine and its peripherals in bad weather conditions especially when there is a risk of lightning.
• Not to touch moving hazardous parts before these have come to a complete stop.
For machines used in public areas, that warning signs shall be placed around the working area of the machine. They shall show the
substance of the following text: WARNING! Automatic lawnmower! Keep away from the machine! Supervise children!
2. Additionally when the appliance is operating automatically
• Do not leave the machine to operate unattended if you know that there are pets, children or people in the vicinity.
MAINTENANCE AND STORAGE
WARNING: When the mower is turned upside down the power key must always be switched off. The power key should be switched off
and the battery removed during all work on the mower’s under frame, such as cleaning or replacing the blades.
• Keep all nuts, bolts and screws tight to be sure the applaince is in safe working condition.
• Inspect Landroid each week and replace worn or damaged parts for safety
• Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that
the rotating parts are balanced.
• Ensure that only replacement cutting means of the right type are used.
• Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may result in electric
shock, overheating or leakage of corrosive liquid from the battery.
• In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into contact with the eyes etc.
• Servicing of the appliance should be according to manufacturers’ instructions.
Recommendation
Please only connect Landroid and/or its peripherals to a supply circuit protected by a residual current device (RCD) with a tripping current
of not more than 30 mA.
Residual risks
To avoid injuries, wear protective gloves when replacing the blades.
Safe transport
• The original packaging should be used when transporting Landroid over long distances
• To safely move Landroid within the working area:
- press the STOP button to stop the mower
- select the four digit PIN code when you start the mower for the first time.
- always switch off robotic lawnmower if you intend to carry the mower.
- carry the mower by the handle at the rear under the mower
- carry the mower with the blade disc away from the body
RF exposure requirements
To satisfy RF exposure requirements, a separation distance of 200mm or more should be maintained between this device and persons
during device operation.
To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be
co-located in conjunction with any other antenna or transmitter.
Safety Warnings for battery pack
• Do not dismantle, open or shred cells or battery pack.
• Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other
or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
• Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.

Safety first EN
6
• Do not subject battery pack to mechanical shock.
• In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the
affected area with copious amounts of water and seek medical advice.
• Seek medical advice immediately if a cell or battery pack has been swallowed.
• Keep battery pack clean and dry.
• Wipe the battery pack terminals with a clean dry cloth if they become dirty.
• Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.
• Do not maintain battery pack on charge when not in use.
• After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum
performance.
• Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the
equipment.
• Do not use any battery pack which is not designed for use with the equipment.
• Keep battery pack out of the reach of children.
• Retain the original product literature for future reference.
• Remove the battery from the equipment when not in use.
• Dispose of properly.
• Do not mix cells of different manufacture, capacity, size or type within a device.
• Do not remove battery pack from its original packaging until required for use.
• Observe the plus (+) and minus (–) marks on the battery and ensure correct use.

Safety first EN
7
INFORMATION ON LANDROID
WARNING – robotic lawnmower can be dangerous if incorrectly used. Read through the Operator’s
manual carefully and understand the content before using your robotic lawnmower.
WARNING - Keep a safe distance from the machine when operating.
WARNING – Operate the disabling device before working on or lifting the machine.
WARNING - Do not ride on the machine.
Li-Ion battery. This product has been marked with a symbol relating to ‘separate collection’ for all battery
packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the
environment. Battery packs can be hazardous for the environment and for human health since they contain
hazardous substances.
Do not burn
Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not
dispose of waste batteries as unsorted municipal waste.
Prohibit disassembling the machine without authorization
Waste electrical products must not be disposed of with household waste. Please recycle where facilities
exist. Check with your local authorities or retailer for recycling advice.
Class III appliance
Read operator's manual
Detachable supply unit
Your Landroid can be used with other Worx functional accessories. Visit www.worxlandroid.com to learn
more about these available accessory options.

Get familiar with Landroid EN
8
Worx Landroid
Wire repair connectors
Spare blades kits
Allen key
Charging pile
Charging base
Screws
Wire pegs
Power supply
Boundary wire
20V battery
Boundary wire distance gauges
Bertelsen ruler
Manuals
A
B
C
D
E
F
G
H
I
J
K
L
M
N
WHAT’S IN THE BOX
26 cm
10 cm
10,2 inch.
4 cm
A B C D
EG
F
H
I
J
KL
M
N

Get familiar with Landroid EN
9
GETTING TO KNOW
LANDROID
A
B
Find My Landroid / Radio Link slot
Rain sensor
Charge contact
Off Limits slot
Voice Control Slot / High Pitched Alarm Slot
USB port
Cutting height adjustment
Microphone hole
Interface
ACS slot
The picture is for reference only
Battery slot
Battery cover button
Safety stop

Get familiar with Landroid EN
10
HOW LANDROID WORKS
In the following section, we would like to help you better understand how Landroid works.
Landroid is an autonomous machine, capable of operating on its own. It knows when it needs to go to its charging base, can
sense when it is raining, can stop itself if it senses a problem and knows to stop, draw back, and turn around when it bumps
into something blocking its path. To prevent an accident, Landroid will also automatically stop its blade disc from rotating if it is lifted
off the ground.
Charges itself
When your Landroid needs to recharge, it will stop mowing and follow the boundary wire in an anti-clockwise direction back to its
charging base. Once charging is complete, Landroid will automatically resume mowing or stay in the charging base according to its
mowing schedule.
Border management
Landroid is programmed to mow the grass along the perimeter of your lawn twice a week on Monday. If you want to change this pre-set,
you can modify it via your smartphone or by using the control panel in “Work time-Customise Work time” menus.
See detailed instructions at the end of this manual.
Rain sensor
Landroid is 100% weather proof and happy to be outside. But mowing wet grass does not give you the best finish or result. Landroid is
equipped with a rain sensor which detects rain and tells Landroid to stop mowing and go back to its charging base.
Rain delay time
After a rainfall, Landroid re-starts when the grass is no longer wet. The default Rain Delay time is 180 minutes. You can change the Rain
Delay time setting via Landroid App.
In more extreme weather…
In case of a lightning storm, protect Landroid by unplugging the charging base, disconnecting the boundary wire, and making sure
Landroid is not allowed to charge. In the Winter and especially in case of very cold weather and snow, we recommend you store your
Landroid inside. In some countries we offer a Winter servicing of your Landroid so it’s ready for the Spring growing season. Contact your
dealer or check online for more details.

11
How Landroid works EN
No more grass clippings to collect
Landroid’s daily mowing produces very short clippings that don’t need to be raked. These clippings are a perfect organic nutrient for your
lawn. Frequent mowing boosts the density of grass blades and effectively prevents the propagation of weeds.
Cut to edge
The special offset blade gets as close as possible to the border of your lawn, leaving you little or no trimming to do.
Cutting Height
Before starting your Landroid for the first time, make sure your grass is no longer than 10cm. If longer, use a regular mower to cut it before
operating Landroid. If you want to drastically
shorten the height of your grass, it is recommended that you do so progressively, by adjusting the cutting height in steps.
Security & PIN Protection
To prevent unauthorised people from being able to use it, Landroid is protected by a PIN code that you can easily set up
Self-levelling cutting deck
Ground Tracer automatically adjusts the blade’s hight to match the natural unevenness found in most lawns.

Getting started EN
12
INSTALLING LANDROID YOURSELF?
EASIER THAN YOU MAY THINK
Installing your Worx Landroid is easier if you carefully follow these instructions. In the end, it is a matter of installing the charging station
and laying the boundary wire all around your lawn. In addition to this manual, you can use the Get Started guide that’s inside the box and
watch the comprehensive video tutorials on our YouTube channel*.
* This information is provided for your convenience but does not replace the instruction manual and the safety instructions that needs to be read and understood.
EVERY MINUTE SPENT IN PLANNING SAVES YOU 10 MINUTES IN EXECUTION
Installing Landroid is even easier if you have made a clear idea of what you need to do. A proper planning will also help you avoid
mistakes or having to rework the installation once it’s done.
On the surface or buried?
Landroid’s boundary wire is designed to stay on the surface of your lawn. Nearly invisible from the first day, it will be engulfed in the soil
in a few weeks. If you will want to bury the wire, it is recommended to first peg it down and test the installation is successful by running
Landroid over the perimeter. This allows you to easily check everything and, if necessary, change the layout before burying the wire. Bury
the wire no more than a few centimetres below ground level, so that the wire ensures good signal.
Plan for the charging station
The charging station, composed of the base plate abnd the charging tower, is where your Landroid goes to have its battery recharged.
It’s also the parking lot where it rests in between one mowing session and the next.
Locate a proper position for it, bearing in mind:
• It needs to be powered, so it should be no more than 10m away from an AC mains outlet
• If possible, choose a shaded position as batteries and chargers don’t like over-heating
• The base needs to sit on flat land to ensure effective docking
• Avoid places close to irrigation sprinklers
Patrol your
lawn to plan
installation
Lay the
boundary
wire
Power up
Landroid.
Test and get
ready to mow
Connect
charging
station to AC
Install the
charging
station

Getting started EN
13
You can place the charging station on your lawn or on a hard surface like a walkway, provided that the lawn and the hard surface are at
the same height (no steps).
To enter the station, Landroid needs at least 80cm straight path in front. On the exit side, it needs at least 30cm straight path before a left
turn (fig. 1). If the turn is to the right, there is no need for a straight path (fig. 2).
The charging base should never be positioned on a slope (fig. 3). Make sure it is level and resting on a flat surface (fig. 4).
Charging station checklist:
within reach of AC mains
in shade
straight path on entrance; straight path on exit if necessary
flat land
no irrigation sprinklers nearby
Plan for the boundary wire
The wire has to be placed at a certain distance from the edge of the lawn. This distance changes depending on what’s on the other side
of the edge. Different parts of your lawn may border different scenarios:
1. If the edge of the lawn borders a step: keep the wire 26cm from the edge.
2. If the edge of the lawn borders a path at the same height: keep the wire 10cm from the edge.
3. If the edge of the lawn borders gravel: keep the wire 26cm from the edge, as Landroid’s wheels may slip on gravel.
If a side of your lawn borders a neighbor’s lawn with a robotic mower in use, lay your wire 1m apart from your neighbor’s wire to avoid
possible interference.
80cm30cm
1
80cm
2
26cm 10cm 26cm
34
0°
0°

Getting started EN
14
Identify forbidden areas
You don’t want your robot mower to behead flowers, dive into a water feature, or shred tree roots that emerge from the ground. Locate
these areas and surround them with boundary wire to prevent Landroid from accessing them.
The boundary wire is a single loop connected on both ends to the charging station, so you will have to depart with the wire from the
border, surround the area you want to protect, then take the wire back to the border as illustrated here in fig.1.
If areas to be surrounded are far away from the border of your lawn, or if you have several areas and tree roofs to protect, this traditional
method is time consuming.
A great alternative is to purchase Landroid’s Off-Limits option. With this, you simply surround forbidden areas with the Off-Limits digital
fence, which does not need to be connected to the boundary loop (fig. 2). The Off-Limits digital fence is also great to protect seasonal
equipment (e.g. a trampoline) or for protecting new changes to the layout of your lawn without having to rework the boundary wire.
Identify obstacles
Landroid’s bump sensor can manage solid obstacles such as trees, furniture and the like, which don’t need to be surrounded by wire. If
your lawn has several obstacles and trees close to each other, we recommend you to purchase the Landroid ACS option, an intelligent
ultrasonic auto-pilot that makes your Landroid steer around obstacles instead of bouncing into them.
2
1
boundary wire
digital fence
PATROL YOUR LAWN
Landroid is designed to manage the most complex of lawns. Carry out a visual inspection of your lawn so you are prepared for a
trouble-free installation of the boundary wire.
0cm

Getting started EN
15
NOW ROLL YOUR SLEEVES UP. WHEN IT’S DONE IT’S DONE!
Now that you have planned the installation in every detail, you are ready to take action. Before starting, you may want to use your old
mower for the last time to clean up your lawn and make the installation easier.
Fix the charging station in the selected location
Insert charging tower into charging base. Secure the base to the ground by means of the supplied screws, using the supplied Allen key
(fig.1). If you position the base on hard surface, fix it with plug and screw fixings (not supplied)
Connect one end of the boundary wire to the charging station
• Strip the end of the wire with a pair of scissors (fig. 2)
• Open the plastic door and insert the stripped end into the red left clamp (fig. 3)
• Pass the wire through the guide of the base, as shown in fig. 3
1
OUT
3
2
Lay the boundary wire around your lawn
• Use the supplied gauge to set the distance wire to edge
• If there is a step at the edge of your lawn, keep the wire at 26cm from it (fig. 4)
• If there is no step, keep the wire at 10cm from the edge (fig. 5)
26cm
26 cm
10 cm
10,2 inch.
4 cm
4
10cm
26 cm
10 cm
10,2 inch.
4 cm
5

Getting started EN
16
External corners of 90°
Rounds external corners of 90° as shown in figure 6.
External corners less than 90°
In special conditions (wet grass, excessive slopes, presence of earth or mud), the Landroid may slip at sharp angles and the turf may be
damaged. To prevent this problem, we advise those who have a garden with these conditions to cut the corner and create two corners
greater than 90° as shown in figure 7.
6
90°
>90° >90°
7
Secure the wire to the ground using pegs
• Place pegs at approximately 80cm to each other (fig. 8)
• Make sure the wire is always in close touch with the ground (fig. 9)
80cm
80cm 80cm
89

Getting started EN
17
Lay perimeter islands, if needed
• Protect flower beds, ponds, tree roots and other areas by surrounding them with the boundary wire
• Depart the edge at a right angle to reach the area to be protected
• Surround the area with the wire, keeping 26cm distance, until you close the island
• Always lay the wire clockwise. Failing to do so will make the mower drive into the island
• Return to the edge of the lawn following the same path
10
Bertelsen method: how to make perfect 90° angles with corners facing the lawn
If there are 90 degree corners that face the inside of your lawn, use the Bertelsen ruler to help Landroid make perfect turns (and remove
the risk that Landroid hits an obstacle on the border of the lawn whilst doing this manoeuvre).
26cm
26cm
26cm
11
Close the loop
Once you have completed laying the wire on the perimeter of your lawn, you will arrive back to the charging base.
• Pass the wire through the guide in the base, up to the clamp (fig.12)
• Cut the exceeding wire and strip the end with a pair of scissors
• Insert the stripped end into the black right clamp
IN
12

Getting started EN
18
Final steps
The boring part is over! There are only a few more steps to go:
• Connect the charging station to the AC mains socket (fig. 13)
• If everything is fine, the LED will light green
• If there’s a trouble in the loop, such as broken wire or wire ends not properly clamped, the LED will turn red. Check that everything is
fine and see the FAQ session if the problem persists
• Open the rear of Landroid and insert the PowerShare battery into the slot until it clicks (fig.14)
13
CLICK!
14
• Place Landroid on charge by making sure a good contact is established with the base (fig. 15). The LED will blink green; once the
battery is fully charged, the LED will turn solid green.
Let Landroid charge the battery for a while. Whilst it is charging you may want to take a well-deserved break: get familiar with the following
instructions, and connect Landroid to your Wi-Fi network.
15

Getting started EN
19
Landroid box includes two small, waterproof boundary wire connectors. They can be used for the following:
• When your lawn has a very long perimeter and you need extra boundary wire to complete the installation. Please do not exceed 350m
of boundary wire: this is the maximum length of the boundary wire perimeter
• When the bounday wire is cut by accident and you need to fix it
• When you decide to rework your garden in the future and need to modify the original boundary wire installation
The connectors are waterproof and provide optimal electric connection.
• Insert both ends of the wire into any two of the three holes of the connector; no need to strip the wires
• Insert the wires fully until both wire ends are visible on the other side of the connector
• Press the connector firmly by using a pair of pliers
Attention: it is not recommended to simply splice the boundary wire with insulating tape or use a screw terminal block for connection. A
broken circuit may occur after a period of time as soil moisture can oxidize the wire.
Joining up the boundary wire

Wed.11/29 09:00PM
STOP
Getting started EN
20
Get familiar with the control panel
Landroid’s control panel provides the key functions in a minimalistic design.
For advanced functions, the free Landroid app provides further options in a richer interface: your smartphone.
NOW FOR THE EXCITING BIT!
START LANDROID FOR THE FIRST TIME.
Starting Landroid
• Position the Landroid inside the work area
• Press and hold down until the display lights up
• Enter the default PIN code 0000 by pressing four times. The display will show 0000. Press again to confirm
The display will show “PIN code OK”
• Press the button and then the button to confirm. The Landroid will start mowing the lawn
• You can stop the Landroid at any time by pressing the large red button
• To send the Landroid to the charging base, press the button and confirm by pressing .
POWER: turns Landroid on and
off. Desabling device prevents
operation of Landroid
RETURN: back one step
to former menu
START:
start mowing
HOME:
send Landroid to
charging station during
operations and activates
DISPLAY
KNOB: select and enter