Xerox 2006NPC - DocuColor Color Laser User manual

DocuColor 2006
Documentation
The Document Company
XEROX

©2001 Xerox Corporation. All rights reserved.
Copyright protection claimed includes all forms and matters of
copyrightable material and information now allowed by statutory or
judicial law or hereinafter granted, including without limitation, material
generated from the software programs that are displayed on the
screen such as styles, templates, icons, screen displays, looks, etc.
Xerox®, The Document Company®, the digital X®, and all Xerox product
names and product numbers mentioned in this publication are
registered trademarks of Xerox Corporation. Xerox Canada is a
licensee of all the trademarks. Other company brands and product
names may be trademarks or registered trademarks of their respective
companies and are also acknowledged.
Changes are periodically made to this document. Technical updates
will be included in subsequent editions.
Printed in the United States of America.

Xerox DocuColor 2006 iii
Safety Notes, Compliances
Certifications, and other notices
Xerox Corporation reserves the right to change this information without
notice, and makes no warranty, express or implied, with respect to this
information. Xerox shall not be liable for any loss or damage, including
consequential or special damages, resulting from the use of this information,
even if loss or damage is caused by Xerox negligence or other fault.
For the latest information, go to www.xerox.com.
Safety Notes
Your DocuColor 2006 and its supplies have been designed and tested to
meet strict safety requirements. These include safety agency examination
and approval, and compliance with established environmental standards.
Please read the following instructions carefully before operating the
DocuColor 2006.
Failure to follow the recommendations in this section may result in personal
injury or rescinding of the machine maintenance agreement.
WARNING
An improper connection to the DocuColor 2006 grounding conductor can
result in electrical shock. Always connect the copier to a properly grounded
wall outlet. If in doubt, have the outlet checked by a qualified electrician.
Never use an extension cord between the copier power cord and an electrical
outlet.
Do not allow anything to rest on the power cord.
Do not place the DocuColor 2006 where people may step on the power cord.
Follow all warnings and instructions that are marked on or supplied with the
DocuColor 2006.
Never override or "cheat" electrical or mechanical interlock devices.
Always locate the DocuColor 2006 on a solid support surface with adequate
strength for the weight of the copier.
Do not use the DocuColor 2006 near water, wet locations, or outdoors.

Safety Notes, Compliances, Certifications, and other notices
Xerox DocuColor 2006
iv
Never push objects of any kind into the slots in the covers, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or
electric shock.
The DocuColor 2006 is designed to prevent user access to unsafe areas and
to ensure that the device will not operate with the covers opened. Never
attempt any maintenance function that is not specified in the Xerox DocuColor
2006 User Information.
Never remove any covers or guards that require a tool for removal, unless
you are instructed to do so. Ensure that you read all Warnings and Cautions,
and follow each step in the instructions exactly as they are written.
Never attempt any activity that is not specified in the Xerox DocuColor 2006
User Information, or on the User Interface, or that is not specifically directed
by an authorized Xerox Representative.
Do not look directly at the exposure lamps. The exposure lamps are not
harmful but they are very bright and may cause discomfort. It is
recommended that the Scanner Cover be closed when the DocuColor 2006 is
in use.
Never operate the DocuColor 2006 if unusual noises or odors are detected.
Disconnect the power cord from the wall outlet and call Xerox Service to
correct any problems.
Maintenance Safety
Refer to these instructions as needed in order to ensure the safe operation
of the Printer Copier.
Always use materials that are supplied or approved by Xerox. Use of other
materials may result in poor performance and could create a hazardous
situation.
Do not use aerosol cleaners. Follow the instructions in the Xerox DocuColor
2006 User Information for the appropriate cleaning methods.
Never use supplies or cleaning materials for purposes other than what they
were intended. Keep all supplies and cleaning materials out of the reach of
children.
Never place coffee or other liquids on the copier.
Never spill liquid of any kind on the copier.
The DocuColor 2006 is equipped with an energy-saving device to conserve
power when the machine is not in use.

Safety Notes, Compliances, Certifications, and other notices
Xerox DocuColor 2006 v
Unplug the DocuColor 2006 from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
•When the power cord is damaged or frayed
•If liquid has been spilled into the DocuColor 2006
•If the DocuColor 2006 has been exposed to rain or water
•If the DocuColor 2006 is producing unusual noises or odors
If the system does not work or continues to malfunction after following the
Problem Solving procedures in the Xerox DocuColor 2006 User Information,
call your local Xerox Service Representative.
For additional safety information concerning the DocuColor 2006 or Xerox
supplied materials, call the following toll-free number:
1-800-828-6571
Ozone Safety
The DocuColor 2006 produces ozone during normal operation. The ozone
produced is heavier than air, and the quantity is dependent on the copy/print
volume. Providing the correct environmental parameters, as specified in
Xerox installation procedures, ensures that the concentration levels meet safe
limits for Ozone depleting substances per the US Clean Air Act (1990) and
the 1987 Montreal Protocols.
If additional information concerning ozone is needed, request the Xerox
publication, Ozone, 600P83222, by:
•Calling 1-800-828-6571
•Contacting your local Xerox representative
Laser Safety
Using the controls or adjustments, or performing any procedures other than
those specified herein, may result in a hazardous exposure to laser radiation
exposure.
This equipment complies with safety standards. With specific regard to laser
safety, the equipment complies with performance standards for laser products
set by government agencies as a Class I laser product and does not emit
hazardous lights, the beam is totally enclosed during all modes of customer
operation and maintenance.
.

Safety Notes, Compliances, Certifications, and other notices
Xerox DocuColor 2006
vi
Safety Notes
FCC
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense
Changes or modifications to this equipment not specifically approved
by the Xerox Corporation may void the user’s authority to operate this
equipment.
Shielded cables must be used with this equipment to maintain compliance
with FCC regulations.
European Union
The CE marking applied to this product symbolises XEROX Limited
Declaration of Conformity with the following applicable Directives of the
European Union as of the dates indicated:
January 1, 1995:
Council Directive 73/23/EEC amended by Council Directive
93/68/EEC, approximation of the laws of the member states related to
low voltage equipment.

Safety Notes, Compliances, Certifications, and other notices
Xerox DocuColor 2006 vii
January 1, 1996:
Council Directive 89/336/EEC, approximation of the laws of the
member states related to electromagnetic compatibility.
A full declaration, defining the relevant directives and referenced
standards can be obtained from your XEROX Limited representative or
by contacting:
•Environment, Health and Safety,
•XEROX Limited,
•PO Box 17,
•Bessemer Road,
•Welwyn Garden City,
•Hertfordshire
•AL7 1HE
•ENGLAND.
•Tel Number [phone]
WARNING
This product is certified manufactured and tested in compliance with strict
safety and radio frequency interference regulations. Any unauthorized
alteration which, includes the addition of new functions or the connection of
external devices, may impact this certification. Please contact your local
XEROX Limited representative for a list of approved accessories.
WARNING
In order to allow this equipment to operate in proximity to Industrial, Scientific
and Medical (ISM) equipment, the external radiation from the ISM equipment
may have to be limited or special mitigation measures taken.

Safety Notes, Compliances, Certifications, and other notices
Xerox DocuColor 2006
viii
WARNING
This is a Class A product. In a domestic environment this product may
cause radio frequency interference in which case the user may be required
to take adequate measures.
Changes or modifications to this equipment not specifically approved by Fuji
Xerox Environmental Health and Safety or Xerox Corporation Environmental
Health and Safety may void the user’s authority to operate this equipment.
Shielded cables must be used with this equipment to maintain compliance
with the Radio Communications Act of 1992.
Documentation conventions
The following conventions are used through out the customer documentation.
WARNING
Warnings alert you to operations that could cause personal injury.
CAUTION
Cautions alert you to operations that may cause damage to the machine.
Notes contain additional information, explanations, and helpful suggestions.
Keypoints provide techniques or shortcuts.

Xerox DocuColor 2006 ix
Table of contents
1. Setting up the Docucolor 2006 .............................................................................1-1
Preparing for the installation .....................................................................................1-1
Selecting a location...................................................................................................1-1
Space requirements for the DocuColor 2006 Printer ................................................1-2
Space requirements without the optional Sorter/Stacker.......................................1-2
Space requirements with the optional Sorter/Stacker............................................1-3
Checking the installation components.......................................................................1-4
Setting up the 2 Tray Module....................................................................................1-5
Unpacking the Printer ...............................................................................................1-9
Printer installation ...................................................................................................1-19
Installing the Duplex Tray........................................................................................1-27
Loading paper in the paper tray ..............................................................................1-35
Installing the Scanner Stand ...................................................................................1-39
Installing the Scanner .............................................................................................1-45
Installing the Document Feeder ..............................................................................1-49
Installing the Sorter/Stacker....................................................................................1-55
Adding memory to the Printer .................................................................................1-73
Adding memory to the Scanner...............................................................................1-79
2. Getting to know the DocuColor 2006...................................................................2-1
Printer, Front View ....................................................................................................2-1
Printer, Rear View.....................................................................................................2-2
Printer, Internal View.................................................................................................2-3
Printer Control Panel.................................................................................................2-4
Scanner and Document Feeder components ...........................................................2-5
Scanner Control Panel..............................................................................................2-7
Accessories...............................................................................................................2-9
Accessories ordering information ..........................................................................2-9
Supplies reorder numbers.......................................................................................2-10

Table of contents User Documentation
Xerox DocuColor 2006
x
3. Network Setup .......................................................................................................3-1
Installing the Token Ring Network card ....................................................................3-1
Windows 95/98 .........................................................................................................3-5
Before you begin ...................................................................................................3-5
Installing the print driver .......................................................................................3-5
Windows 2000 ..........................................................................................................3-7
Before you begin ...................................................................................................3-7
Installing the print driver .......................................................................................3-7
Windows NT 4.0........................................................................................................3-9
Before you begin ...................................................................................................3-9
Installing the print driver .......................................................................................3-9
Macintosh OS .........................................................................................................3-11
Before you begin .................................................................................................3-11
Installing the print driver .....................................................................................3-11
Setting up the DocuColor 2006 Chooser.............................................................3-11
4. System Administrator functions ..........................................................................4-1
Map to the networking chapters................................................................................4-2
Guide to the networking chapters .............................................................................4-3
5. Connecting to the Network ...................................................................................5-1
Supported network protocols and frame types..........................................................5-3
Quick path to installation...........................................................................................5-4
Ethernet cabling ....................................................................................................5-4
Parallel cable connection ......................................................................................5-4
Mac OS environment with AppleTalk ....................................................................5-6
Windows computers in a Novell environment........................................................5-7
Windows NT 4.0 server environment ....................................................................5-8
Windows computers using Windows printing ........................................................5-9
Unix and Windows NT. 4.0 workstations
on a TCP/IP network ...........................................................................................5-10
Parallel Port connection ......................................................................................5-11
Connecting the DocuColor 2006 to the network......................................................5-12

User Documentation Table of contents
Xerox DocuColor 2006 xi
6. Preparing for the setup .........................................................................................6-1
Levels of access and control.....................................................................................6-1
Printer connections................................................................................................6-2
Passwords.............................................................................................................6-3
Where to set passwords ....................................................................................6-3
Control level scenarios ......................................................................................6-4
Fiery WebTools.........................................................................................................6-6
Network server setup requirements ..........................................................................6-7
Ensuring the printer connection ................................................................................6-8
7. Performing the setup from the Printer Control Panel ........................................7-1
Set up the print functions ..........................................................................................7-1
Top-level menus ................................................................................................7-2
System Setup ....................................................................................................7-3
Printer Setup......................................................................................................7-4
PostScript Setup ................................................................................................7-5
PCL Setup .........................................................................................................7-6
Specify network information......................................................................................7-7
Specify network protocol options .......................................................................7-8
Perform Network Services Setup............................................................................7-10
NDS Setup.......................................................................................................7-10
Bindery Setup ..................................................................................................7-13
SMB Setup.......................................................................................................7-15
Print information pages ...........................................................................................7-16
8. Setting up the network server ..............................................................................8-1
Support for Fiery utilities ...........................................................................................8-1
Printing on a NetWare 3.x, 4.x, or 5.x network..........................................................8-2
Overview of IPX printing to the DocuColor 2006.......................................................8-3
Configuring a NetWare 3.x, 4.x, or 5.x server for printing .........................................8-4
Setting up an NDS connection ..............................................................................8-6
Setting the NetWare 4.x or 5.x bindery context .....................................................8-6
Setting up a NetWare print queue for bindery .......................................................8-7
Setting up NetWare Windows clients for printing ......................................................8-7

Table of contents User Documentation
Xerox DocuColor 2006
xii
The DocuColor 2006 on a TCP/IP network with Windows NT 4.0 ............................8-8
Configuring a Windows NT 4.0 server...................................................................8-9
Adding the DocuColor 2006 to the TCP/IP network
(Windows NT 4.0)..................................................................................................8-9
Installing the DocuColor 2006 as a shared printer...............................................8-10
Configuring clients of a Windows NT 4.0
or Windows 2000 server......................................................................................8-11
Configuring the server and client workstations for Fiery WebTools ........................8-12
Setting up Fiery WebTools on the printer ............................................................8-12
Setting up Fiery WebTools on a client workstation..............................................8-12
Accessing the Fiery WebTools ............................................................................8-13
Changing the WebLink destination......................................................................8-13
The printer on a network with UNIX workstations ...................................................8-14
Setting up the printer on TCP/IP networks ..........................................................8-15
Setting up printing on UNIX systems ...............................................................8-15
Setting up TCP/IP for communication with the printer .....................................8-16
9. Installing user software in a Windows 95/98 environment ................................9-1
Overview of installation .............................................................................................9-2
Before you begin.......................................................................................................9-2
Installing PostScript or PCL print drivers...................................................................9-3
Installing the PostScript or PCL print drivers (Windows 95/98) .............................9-3
Completing the connection .......................................................................................9-7
Parallel port printing ..............................................................................................9-7
To prepare the port for parallel port printing in Windows 95 ..............................9-7
To prepare the port for parallel port printing in Windows 98 ..............................9-9
Setting up parallel port printing ........................................................................9-12
Setting up IPX/SPX printing with Windows 95/98................................................9-14
Setting up SMB printing on Windows 95/98............................................................9-17
Setting printer options .............................................................................................9-22
Installing additional software for Windows 95/98 ....................................................9-23
Copying printer description files ..........................................................................9-24
Installing the ICM profile......................................................................................9-24
Loading the working space profile using Photoshop 5.0..................................9-25
Loading the ICM profile....................................................................................9-26

User Documentation Table of contents
Xerox DocuColor 2006 xiii
10. Installing user software in a Windows 2000 environment .............................10-1
Overview of installation ...........................................................................................10-2
Before you begin.....................................................................................................10-2
Installing the user software for parallel port printing................................................10-3
Installing the software for TCP/IP and LPR printing
(new installation of Windows 2000).........................................................................10-9
Installing TCP/IP and LPR printing
(upgrade installation of Windows NT 4.0 to Windows 2000).................................10-13
Installing the user software for IPX/SPX printing...................................................10-15
Installing the user software for SPM printing.........................................................10-22
Installing the user software for SMB printing.........................................................10-24
Setting printer options ...........................................................................................10-30
Installing additional software for Windows 2000 ...................................................10-31
Copying printer description files ........................................................................10-32
Installing the ICM profile....................................................................................10-32
Loading the working space profileusing Photoshop 5.0.................................10-33
Loading the ICM profile..................................................................................10-34
11. Installing user software in a Windows NT 4.0 environment...........................11-1
Overview of installation ...........................................................................................11-2
Before you begin.....................................................................................................11-2
Installing the user software for parallel port printing
(Windows NT 4.0) ...................................................................................................11-3
Installing the user software for IPX printing (Windows NT 4.0) ...............................11-9
Installing the user software for TCP/IP and LPR printing
for Windows NT 4.0 ..............................................................................................11-15
Installing the user software for SMB printing (Windows NT 4.0) ...........................11-18
Setting printer options ...........................................................................................11-24
Installing additional software for Windows NT 4.0.................................................11-25
Copying printer description files ........................................................................11-26
Installing the ICM profile....................................................................................11-26
Installing the ICM profile on Windows NT 4.0 ................................................11-26
Loading the working space profileusing Photoshop 5.0.................................11-27
Loading the ICM profile..................................................................................11-28

Table of contents User Documentation
Xerox DocuColor 2006
xiv
12. Installing user software in a Macintosh OS environment ..............................12-1
General steps for installing the user software .........................................................12-1
Setting up the DocuColor 2006 as a PostScript printer .......................................12-2
Setting up the DocuColor 2006 in the Chooser ...................................................12-4
Installing Fiery software and fonts .......................................................................12-6
Installing Mac OS Software..............................................................................12-6
Installing Mac OS Runtime for Java.................................................................12-7
Installing additional software...................................................................................12-8
Loading profiles ...................................................................................................12-9
Setting the ColorSync System Profile ..............................................................12-9
Loading the monitor settings file using Photoshop 5.0.....................................12-9
Loading the ICC printer profile in Photoshop 4.0 ...........................................12-11
Loading the ICC printer profile in Photoshop 5.0 ...........................................12-12
13. Installing the Fiery software for Windows and Macintosh.............................13-1
Installing the software .............................................................................................13-1
Installing the Fiery Link software .........................................................................13-2
Using the software for the first time.........................................................................13-2
Configuring a connection for Fiery Link
for Windows and Macintosh OS ..........................................................................13-2
Configuring the connection to Fiery servers
in a local subnet...............................................................................................13-3
Manually configuring the connection to Fiery printers......................................13-4
Configuring the connection for Fiery Link
using an Advanced IP search ..........................................................................13-6
Configuring the connection for Fiery Link
using an Advanced Subnet search ..................................................................13-9
Installing ColorWise Pro Tools for Windows and Macintosh OS ...........................13-12
Configuring a connection for ColorWise Pro Tools............................................13-12
Modifying the configuration................................................................................13-14
Downloading Installers with Fiery WebTools ........................................................13-15
Setting up Fiery WebTools ................................................................................13-15
Setting up Fiery WebTools on the printer.......................................................13-15
Setting up Client Workstations
to use Fiery WebTools...................................................................................13-16

User Documentation Table of contents
Xerox DocuColor 2006 xv
14. Printing from the Windows workstations ........................................................14-1
Printing from applications........................................................................................14-2
Setting options and printing with Windows 95/98 and Windows 2000.................14-2
Configuring the PostScript print options for Windows 95/98................................14-3
Configuring the PCL print options for Windows 95/98 .........................................14-5
Setting options and printing from Windows 2000 ....................................................14-7
Using saved settings (Windows 95/98 and Windows NT 4.0) .............................14-9
Creating Saved Settings ..................................................................................14-9
Loading Saved Settings...................................................................................14-9
Deleting Saved Settings.................................................................................14-10
Modifying Saved Settings ..............................................................................14-10
Exporting Saved Settings...............................................................................14-11
Importing Saved Settings...............................................................................14-11
Using Shortcuts.....................................................................................................14-12
Setting print options using Shortcuts .................................................................14-12
Setting print options using Page Shortcuts........................................................14-12
Working with custom page sizesin Windows 95/98 or Windows 2000 ..................14-13
Defining a custom page size .............................................................................14-13
Printing a custom page size ..............................................................................14-14
Saving files to print at a remote location ...............................................................14-15
Setting print options for a job with Windows NT 4.0..............................................14-15
Setting print options for a PostScript job (Windows NT 4.0)..............................14-16
Setting print options for all PostScript jobs (Windows NT 4.0)...........................14-18
Setting print options for a PCL job (Windows NT 4.0) .......................................14-18
Setting print options for all PCL jobs (Windows NT 4.0)....................................14-19
Printing with WebDownloader ...............................................................................14-20
15 Printing from the Macintosh OS workstations..................................................15-1
Printing from applications........................................................................................15-1
Selecting the printer in the Chooser ....................................................................15-1
Setting options and printing from Mac OS workstations ......................................15-3
Printing from an application.................................................................................15-5
Defining a custom page size ...................................................................................15-6

Table of contents User Documentation
Xerox DocuColor 2006
xvi
16. Using the Fiery WebTools.................................................................................16-1
Fiery WebTools Overview.......................................................................................16-1
Accessing the Fiery WebTools ............................................................................16-3
Using the Status WebTool ......................................................................................16-4
Using WebLink........................................................................................................16-4
Using the Installer WebTool....................................................................................16-5
Using WebDownloader ...........................................................................................16-7
Font Manager..........................................................................................................16-8
17. Using Fiery Link.................................................................................................17-1
Fiery Link tools ....................................................................................................17-4
Setting preferences .............................................................................................17-6
Using My Fiery List of Fiery Link .........................................................................17-8
18. Using Fiery WebSpooler ...................................................................................18-1
Tracking and managing jobs with Fiery WebSpooler ..............................................18-1
Accessing the Fiery WebSpooler window............................................................18-2
About the Fiery WebSpooler window ..................................................................18-3
Manipulating job options and job flow..................................................................18-4
Overriding job option settings..............................................................................18-6
Using the Job Log ...................................................................................................18-7
Displaying the Job Log ........................................................................................18-7
Updating, printing and deleting the Job Log ........................................................18-8
19. Performing the setup from WebSetup .............................................................19-1
Accessing Setup .....................................................................................................19-1
Enabling Java services ...........................................................................................19-2
Accessing Fiery WebSetup.....................................................................................19-3
General Setup options ............................................................................................19-4
Server Setup...........................................................................................................19-5
Network Setup ........................................................................................................19-8
Printer Setup.........................................................................................................19-20
Exiting Setup.........................................................................................................19-24

User Documentation Table of contents
Xerox DocuColor 2006 xvii
20. Using ColorWise Pro Tools ..............................................................................20-1
Calibrator ................................................................................................................20-1
Introduction..........................................................................................................20-1
Understanding Calibration...................................................................................20-2
How Calibration Works ....................................................................................20-2
Scheduling Calibration.....................................................................................20-3
Checking Calibration Status.............................................................................20-4
Using a Densitometer..........................................................................................20-4
Setting up the Densitometer ............................................................................20-4
To Connect the X-Rite DTP32 to the Computer...............................................20-4
Calibrating with ColorWise Pro Tools ..................................................................20-5
To Calibrate the copier Using Calibrator..........................................................20-5
To Restore Default Calibration Measurements ................................................20-6
Expert Mode ........................................................................................................20-6
Color Editor.............................................................................................................20-6
Editing Profiles ....................................................................................................20-7
To Edit a Simulation Profile in master Mode
or an Output Profile in Custom Mode:..............................................................20-7
To Edit a Simulation in Quick or Full Mode......................................................20-9
Undoing Simulation Edits ..................................................................................20-10
To Undo Edits Made to a Custom Linked Simulation.....................................20-10
Checking Edited Profiles ...................................................................................20-11
To Check a Profile .........................................................................................20-11
Profile Manager.....................................................................................................20-11
Setting the Default Profiles................................................................................20-12
To Specify a Default Profile ...........................................................................20-12
Downloading Profiles.........................................................................................20-13
To Download a Profile ...................................................................................20-13
Editing Profiles ..................................................................................................20-14
Managing Profiles..............................................................................................20-15
To Back Up Profiles .......................................................................................20-15
To Delete Profiles from the Fiery Hard Disk...................................................20-15
Defining Profiles ................................................................................................20-16

Table of contents User Documentation
Xerox DocuColor 2006
xviii
To Define a Profile .........................................................................................20-16
Changing Global Settings..................................................................................20-17
To Change the Global Settings......................................................................20-17
21. Basic Copying....................................................................................................21-1
The Copier Control Panel .......................................................................................21-1
Copy Mode..............................................................................................................21-3
Auto Start ............................................................................................................21-4
The Copier Main Screen .....................................................................................21-4
Positioning the Originals .........................................................................................21-5
The Document Glass...........................................................................................21-5
The Document Feeder ........................................................................................21-7
Making a Copy ......................................................................................................21-10
22. Copy Features....................................................................................................22-1
Reduce/Enlarge ......................................................................................................22-1
Using the Reduce/Enlarge feature ......................................................................22-2
Paper Supply ..........................................................................................................22-4
Using Paper Trays 1, 2, and 3.............................................................................22-4
Using the Bypass Tray ........................................................................................22-5
Loading the Bypass Tray .................................................................................22-5
Loading Transparencies into the Bypass Tray.................................................22-8
Loading Postcards into the Bypass Tray..........................................................22-9
Loading Envelopes in the Bypass Tray..........................................................22-10
Making a Copy Using the Bypass Tray..........................................................22-11
Color Mode ...........................................................................................................22-12
Using the Color Mode feature............................................................................22-14
Lighten/Darken......................................................................................................22-15
Using the Lighten/Darken feature......................................................................22-15
Quality Adjustment................................................................................................22-16
Using the Sharpness option ..............................................................................22-16
Using the Color Level option .............................................................................22-17
Using the Background Suppression option .......................................................22-18
Advanced Features...............................................................................................22-19

User Documentation Table of contents
Xerox DocuColor 2006 xix
Using the Output option.....................................................................................22-20
Determining the output with the optional Sorter/Stacker ...................................22-21
Using the Erase option ......................................................................................22-22
Using the 2-Sided feature..................................................................................22-23
Using the 2 Up option........................................................................................22-25
23. Tools Mode.........................................................................................................23-1
Meter Check............................................................................................................23-1
Administrative Features ..........................................................................................23-2
Defaults for Copy.................................................................................................23-4
Color....................................................................................................................23-7
Auto Color Adjust ................................................................................................23-9
Detect Doc Size.................................................................................................23-11
Auto Mode Change ...........................................................................................23-12
Limit Copy Set ...................................................................................................23-13
Timer Preset......................................................................................................23-14
Sound Preset.....................................................................................................23-16
User Password ..................................................................................................23-17
Admin Password ...............................................................................................23-19
Version Info .......................................................................................................23-20
Self Diag............................................................................................................23-21
Transporting the Scanner..................................................................................23-22
24. Problem Solving ................................................................................................24-1
Avoiding paper jams ...............................................................................................24-1
Printer jam clearance areas ....................................................................................24-2
Document Feeder jam clearance area....................................................................24-3
Clearing a paper tray jam........................................................................................24-5
Clearing a Duplex Tray jam ....................................................................................24-7
Clearing Area 1 jams ..............................................................................................24-9
Clearing Area 2 jams ............................................................................................24-13
Clearing Area 3 jams ............................................................................................24-15
Clearing Area 4 jams ............................................................................................24-17
Clearing Area 5 jams ............................................................................................24-19

Table of contents User Documentation
Xerox DocuColor 2006
xx
Clearing the Fuser Area ....................................................................................24-19
Clearing the Upper Inverter ...............................................................................24-21
Clearing Area 6 jams ............................................................................................24-25
Clearing Jams in the Sorter/Stacker .....................................................................24-26
Copy/print quality problems ..................................................................................24-27
Adjusting the color ................................................................................................24-29
VisualCal ...........................................................................................................24-29
1. Print Limits Page.......................................................................................24-29
2. Gray Balance Page...................................................................................24-31
3. Comparison Page .....................................................................................24-32
Printer Error messages .........................................................................................24-33
Printer Error codes................................................................................................24-37
Scanner Error messages ......................................................................................24-39
Sorter/Stacker messages......................................................................................24-41
Network Problem Solving......................................................................................24-45
Troubleshooting during Setup from the Control Panel.......................................24-45
Network Protocol Setup messages ...................................................................24-46
Novell problems during Network Setup .............................................................24-51
Novell error messages ......................................................................................24-51
Runtime Printer error messages........................................................................24-53
Name Table.......................................................................................................24-55
Printing problems ..................................................................................................24-56
On a Windows workstation................................................................................24-56
On a Mac OS workstation..................................................................................24-57
General printing problems .................................................................................24-58
Problems with print quality.................................................................................24-61
Job Management Problem Solving .......................................................................24-63
Job management error messages.....................................................................24-63
Unexpected printing results...............................................................................24-65
Clearing the Printer ...........................................................................................24-66
Users are unable to connect to the DocuColor 2006.........................................24-66