Xyron Xyron ezLaminator User manual

The Xyron®ezLaminator™is perfect
for your office, school and home laminating needs.
The patented easy loading cartridge offers you all the
flexibility and quality you expect from Xyron without
heat, electricity or batteries. The ezLamintor allows you to
effortlessly apply lamination to your document or projects.
User Guide
*Refill Cartridges sold separately
ezLaminator™
The easiest way to laminate
Part# 3368_RevA
The purchase or acquisition of this product does not confer the right or license to use the machine and
cartridges in the retroreflective field or to make or sell machines or cartridges for use in the retroreflective
field. May contain one or more of the following U.S. patents 5,580,417, 5,735,998, 5,961,779, 6,244,322, 6,270,612,
RE37345, 6,602,376, 6,660,120, 6,675,854, 6,698,487, 6,742,428, 6,810,935, 6,814,693, 6,832,639, 6,840,298, 6,843,296,
7,087,280.
Visit www.xyron.com for more information.
©2008 Xyron, Inc.
8465 N. 90th St. Suite 6
Pima Center
Socttsdale, AZ 85258
Warranty Information
Xyron, Inc. warrants the Xyron®ezLaminator™is free from defects in material
and workmanship for a period of one (1) year from the date of purchase. Xyron, Inc.
will repair or replace a defective product or part without charge, with proof of purchase.
If the product is damaged by neglect or misuse, the warranty is null and void.
To register your product online, please go to www.xyron.com and click on the product
registration tab.
Customer Service
We want you to be happy with your purchase of Xyron products. If for any reason
you have a problem or a question, we would like to hear from you before you
consider returning it to the store where you bought it. In many cases, we will be
able to solve your problem or answer your question right over the phone; so please
contact Xyron Customer Service toll-free at 1-800-793-3523 or 1-480-443-9419
for help. You can also e-mail us at: [email protected]
For customer service outside of the U.S.
Australia: 61 2 8899 8500; [email protected]
New Zealand: 64 9 272 1600; [email protected]

Handle:
Advances items
through the machine
when turned clockwise.
The Built-in Grip/Carry Handle:
Take your machine almost
anywhere.
The Input Tray:
Use to feed items into tray.
Patented Easy Loading Cartridge:
Allows you to replace
cartrige in seconds.
Removable Trimmer:
Makes it easy to cut.
Place item on feed tray.
Guide item forward while slowly
turning knob clockwise until your
item comes out of the back of
the machine.
Open cartridge compartment
by lifting up on latch.
Gently pull cartridge up
and out of machine.
Open lid. Slide cartridge down
into tracks on machine sides with
exposed roll of material facing
open lid cover. Close lid securely.
Advance laminate and trim.
Cut Blade
To Replace the Cut Blade
Basic Operation as easy as 1-2-3!
• For best results, turn the handle slowly.
• If machine rollers pick up adhesive after
use, clean with isopropanol alcohol.
• Store your machine and cartridge between
40ºF and 70ºF
Helpful Hints
Features & Functions
Press down on cut blade and
slide to the left or right to cut.
Note: For a smooth cut, place
your finger all the way back to
the back of the cut blade holder.
Unloading & Loading
1 Insert Item
2 Turn Handle
3 Trim
1 Insert Item
1 Loosen and remove the screw in the
cut bar with wrench. Remove colored
plastic insert and slide the old blade
off cut bar (safely discard old blade).
Visit www.xyron.com for more information.
2 Carefully slide new blade onto cut bar.
Note: Sharp edge of blade should be
facing the machine. Replace the colored
plastic insert and secure with wrench.
3 Trim
• Can laminate up to 87/8” wide and up to 60’ long.
• Xyron laminates are adhesive based, so they will
not peel or separate. You can cut close to edge
or into document itself.
2 Turn Handle