
YCO-***********
Delicell Operation Manual
I. Overview
A. Preventing Damage to the Scale
1) Do not push the indicator or keys with sharp objects. They may break or puncture the switch mem-
brane panel.
2) Use the specified power supply and choose a suitable environment. If you do not, the weight read-
ings may be inaccurate and the scale may be damaged.
3) The scale is a sensitive weighing instrument. Avoid physical shocks. If you drop something on the
scale, step on the platform or drop the scale, you may damage the scale and cause it to be inaccu-
rate.
4) If the scale becomes dirty, wipe it with a soft cloth. For stubborn stains, apply a little neutral deter-
gent and then wipe the scale with a dry cloth. Do not use thinner, benzene, hot water, or chemical
agents, all of which can cause deformation, discoloration, or deterioration of the scale.
5) Never remove the case. The fine adjustment section may be damaged and you may be injured by
sharp edges on the internal parts.
B. Keeping the Scale Working Efficiently
1) Place the scale on a flat stable surface that will support the scale and the load.
2) Do not place the scale in an area exposed to direct sunlight or to wind currents (i.e. - from an air
conditioner, ventilator, etc.,) otherwise, the readings will not be accurate.
3) Do not place the scale near machines that create vibrations or electromagnetic disturbance, such as
microwave ovens, portable phones or large motors. This will affect the accuracy of the scale.
4) The operating temperature range is from –10°C to +40°C (14°F to 108°F). Do not subject the scale
to sudden temperature changes; allow the scale to adjust to the new temperature before use.
5) This scale is not waterproof or dustproof. Do not expose the scale to splashing water. Do not use or
store the scale in an extremely humid or dusty environment.
6) If the scale is sealed, do not break the seal. If you break the seal, the scale will not be considered
legal for trade. In this case, contact your dealer.
7) Do not disassemble or modify the scale, you will void the warranty. Modified scales will not be legal
for trade.
C. Specifications
Weighing system Cord vibration type load cell
Capacity 20 lb x 0.01 lb or 4 Kg x 2g or 10 Kg x 5 g
Weighing range 0.01 lb to 20 lb
Increment 0.01 lb (5 g)
Maximum tare 9kg
Display Liquid crystal display tube, 5 digits for weight,
5 digits for unit price, 6 digits for price
Preset key Max. 15 preset keys,
Memory 15 kinds of PLU’s and 8 kinds of tares,
depending on the parameter selection
Rated voltage 115 V AC ± 10 %, 50/60 Hz
Power consumption 10 W
Temperature range - 10 °C to + 40 °C for operation
Net weight Approx. 11 lb (5 kg)
Accessories Insect repellent ring (4) and 1A fuse (1)
1