Yealink T46 Quick Tips
888.538.3960 | www.momentumtelecom.com/support
Examples provide typical steps for usage of the standard configuration setup. Contact customer service for assistance with customized configurations.
CONFERENCE CALL
Add aVHFRQG caller to an active call.
To Conference:
1.
2.
Press the Conference soft key to
place the current call on hold.
When you hear a dial tone, dial the
number or extension of the person
you wish to add to make a 3-way call.
When they answer, press the
Conference soft key again.
3.
GET VOICEMAIL MESSAGES
From Your Phone:
1. Press the Messages button.
2.
3.
Enter your 4 digit PIN when prompted.
Select the appropriate option from the
voicemail menu prompts.
From Anywhere:
1. Call the extension's 10-digit number
2. Press the * key when the voicemail
announcement begins to access the
Voicemail menu prompts.
ANSWER A CALL
•Pick up the handset.
•Press the
Headset
button
•Press the
Speakerphone
button
•Press the
Answer
soft key
PLACE A CALL
•Pick up the handset, or press the
Headset
or the
Speakerphone button
•Dial number, and then press the
Send
soft key
HOLD & RESUME CALLS
On hold call displays only on the device used
to place the call on hold.
•While on an active call press the
Hold button located on the right
side of phone.
•Press the same Hold button to
resume the call before picking up
the handset.
•Press the Hold soft key
•Call can be resumed by using the
Resume soft key.
TRANSFER CALLS
Transfer calls to any extension
Consulted/Warm Transfer
Press or tap the Transfer soft key
Enter or select the extension or phone
number and press Send, OK or the #
button to dial and wait for an answer.
Speak to the recipient and press or
tap the Transfer soft key again to
send the call when ready.
Blind/Cold Transfer
Press or tap the Transfer soft key
Dial or select the ext/phone number
or tap the Transfer soft Press
key again.
END CALLS
You can only end active calls. To end an On
Hold call, you must resume the call first.
To End an Active Call:
Replace the handset in the cradle.
Press the
Headset button
Press the Speakerphone button
Press the End Call soft key
And if using a headset or the speakerphone:
