Zhone 6411 User manual

ADSL2+ Modem (Conexant)
6411-A2-xxx
✓ADSL2+ Annex M support
data rates up to 3MB
✓Multiple PVC up to 8
support
✓Static IP, Dynamic RIP
routing support
✓Network Address
Translation (NAT)
✓Universal Plug and Play
Support
✓TR-069 Remote
Management Support
ADSL2+ Modem with 1 Ethernet and 1 USB,
Conexant chipset
The Zhone 6411-A1 ADSL 2/2+ Ethernet USB Router uses Conexant
Viking II-Plus Chipset solution that fully complies with ANSI T1.413 Issue
2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Zhone
6411-A1 also provides higher data transmission rates with ADSL2,
ADSL2+, and Extended Reach-ADSL support. This next generation ADSL
will provide up to 12Mbps speed with an additional 600 feet reach for
ADSL2; and up to 27Mbps speed with distance up to 5,000 feet for
ADSL2+ Support. In addition, with ADSL2+ Annex M support, upstream
rate will be improved to up to 3Mbps.
Targeted at the residential users, it is for both single user using Bridge
mode with host based PPPoE Client and multi-users utilizing the
DSL309EU’s inbuilt PPPoE/A, IP routing, NAT functionality to share the
ADSL link.
It comes with the Packet Filtering firewall and DMZ support for a full
security options against malicious hackers. With Universal Plug and Play
support, home networking becomes a breeze for everyone in the family.
Multi Port Range/Popular Application Forwarding makes it even easier to
select which application you want your network to allow while ensuring
your security at the same time.

Technical Specifications
ADSL2+ Modem (Conexant)
Dimensions
■Dimension : 105 (L) x 105 (W) x 30 (H) mm
Weight
■Weight : Approx. 250g
Power
■12VDC, 0.8Amp
Interfaces
■DSL Line: RJ11
■Ethernet: 10/100BaseT
■USB 1.1
■Integrated phone filter
Standards Support
■ATM Support
- ITU-T I.610 F4/F5 OAM Send and
Receieve/Loop back
- Support for multiple PVC's up to 16
- RFC 1483/2684 (Bridged/Routed Ethernet over
ATM)
■Routing/Bridge Support
- Transparent Bridge Support
- DHCP Server
- DNS Relay Agent
- Dynamic DNS Support
- DMZ support
- Static Routing
- RIPv1 and RIPv2
- Policy based QoS (TOS, 802.1p,
Source/Destination IP Address,
Source/Destination Port, Protocol)
- IGMP v1/v2
- SNTP support
- IP Sec and PPTP/L2TP VPN pass through
support
- QOS (802.1p) support
- Port fowarding
- Port to PVC mapping
■PPP Support
- PAP/CHAP authentication
- PPPoA
- PPPoE
■Security
- NAT for Basic Firewall support
- Ingress and Egress Packet Filtering
- Stateful Packet Inspection
- Protection against Denial of Service attacks
■DELT support
Protocol Support
■ANSI T1.413 (Full Rate ADSL)
■ITU G.992.1 (DMT)
■ITU G.992.2 (G.lite)
■ITU G.992.3 (ADSL2)
■ITU G.992.5 (ADSL2+)
■ITU G.994.1 (G.hs)
■ITU G.997.1
■Annex L
■Annex M
Management
■Web-based Configuration GUI
■CLI
■Telnet Remote Management
■SNMP Support
■FTP/TFTP firmware upgrade and configuration
backup/restore
■Syslog Support
■TR-069
Bandwidth/Distance
■Downstream Speeds up to 24 Mbps using
ADSL2+ (2.2 Mbps with ReachDSL)
■Upstream speeds up to 2 Mbps with ADSL2+
(2.2 Mpbs with ReachDSL)
Regulatory Compliance
■FCC Part 15, Part 68
■CE
Operating Requirements
■Operating Temperature: 32° F to 104° F (0° C to
40° C)
■Storage Temperature: –4° F to 149° F (–20° C to
65° C)
■Humidity: 5% to 95%, non-condensing
Ordering Information
6411-A2-200 ADSL2+ BRID/RTR, ANNEX A, NA
6411-A2-300 ADSL2+ BRID/RTR, ANNEX A, UK
6411-A2-302 ADSL2+ BRID/RTR, ANNEX A, EURO
6411-A2-304 ADSL2+ BRID/RTR, ANNEX A, INDIA
6411-A2-330 ADSL2+ BRID/RTR, ANNEX B, UK
6411-A2-332 ADSL2+ BRID/RTR, ANNEX B, EURO
17 December 2010 11:32:12