Zhone 6211-I3 Series User manual

ADSL2+ Single Port Modem
6211-I3-xxx
✓Auto-connect feature will
automatically detect the
first usable PVC and
automatically detect
PPPoE, PPPoA, and Bridge
Protocol(with DHCP Server
available)
✓Configurable as either a
Bridge or Router
✓Filter traffic based on
Destination or Source IP
Address and MAC
Addresses
✓Traffic Class Rules based
on Protocol, Source IP,
Source Port, Destination
IP, Destination Port,
802.1p
✓Single Click DSL test - Tests
Ethernet connection and
ADSL Synchronization
along with ATM OAM F5
segment pings and
end-to-end pings.
✓Configured through
easy-to-use web interface
✓DELT - Integrated Loop
Testing for Line
troubleshooting
ADSL2+ Single Port Bridge/Router with USB
The 6200 ADSL2+ family of endpoints deliver the required performance
for multimedia applications at very competitive price points. The 6200
ADSL2+ endpoints, in compact form factor, have been successfully used
for residential, business, in-building deployments such as hotel/motel,
temporary housing, and dormitory-campus installations for high-speed
internet access (HSIA) and video-on-demand services.
The Zhone 6200 ADSL2+ endpoints are easily user-installed. The
embedded web-based user interface is designed to simplify ADSL
deployment. All products provide an Ethernet connection that is
auto-sensing, eliminating the worry about connection cable type
(straight-through vs crossover).
DELT or Dual End Loop Test, is a feature that is present the 6200 Family
of ADSL2+ CPEs. DELT is primarily used for reactive tests on a loop after
a modem has been deployed—either to help troubleshoot a line or to
capture a baseline of loop characteristics at the time of installation.
Because DELT is a dual-ended test, it requires equipment that supports
the DELT feature at both ends of the copper loop. While this prevents
DELT from being used on loops where no CPE has yet been deployed,
DELT in turn offers a deeper set of loop tests, and can provide very
valuable information on the condition of a copper loop.
Default settings make for a quick and easy installation that doesn't
require any configuration.
The modem, when operating in router mode, support DHCP
Server/Relay/Client, NAPT, as well as RIP, dynamic routing, port
forwarding, and static routing. For security, firewall functions including
PAP/CHAP authentication and IP filtering are supported.

Technical Specifications
ADSL2+ Single Port Modem
Dimensions
■1.2"(3.0cm) high x 6"(15.2cm) wide x
4.4"(11.8cm) deep
Weight
■1.5lbs (0.7kg)
Power
■100 VAC, 50Hz
■110 VAC, 60Hz
■220 VAC, 50/60Hz
Interfaces
■DSL Line: RJ11
■Ethernet: 10/100BaseT
■USB 1.1
■Integrated Phone Filter
Standards Support
■ATM Support
- ITU-T I.610 F4/F5 OAM Send and
Receieve/Loop back
- Support for 8 PVC's
- RFC 1483/2684 (Bridged/Routed Ethernet over
ATM)
■Routing/Bridge Support
- Transparent Bridge Support
- DHCP Server/Relay/Client
- DNS Relay Agent
- Dynamic DNS Support
- DMZ support
- Static Routing
- RIPv1 and RIPv2
- Policy based QoS (TOS, 802.1p,
Source/Destination IP Address,
Source/Destination Port, Protocol)
■PPP Support
- PAP/CHAP authentication
- PPPoA
- PPPoE
■Security
- NAT for Basic Firewall support
- Ingress and Egress Packet Filtering
- Parental Control
- MAC Filtering
- Stateful Packet Inspection
■DELT support
■TR-069 Support
■SNMP Support
Protocol Support
■ANSI T1.413 (Full Rate ADSL)
■ITU G.992.1 (DMT)
■ITU G.992.2 (G.lite)
■ITU G.992.3 (ADSL2)
■ITU G.992.5 (ADSL2+)
■ITU G.994.1 (G.hs)
■ITU G.997.1
■Annex L
■Annex M
Management
■Web-based Configuration GUI
■CLI
■Telnet Remote Management
■FTP/TFTP firmware upgrade and configuration
backup/restore
■Syslog Support
■TR-069 Support
Regulatory Compliance
■FCC Part 15, Part 68
■CE
■UL
■TUV
■RoHS compliant
Operating Requirements
■Operating Temperature: 32F to 104F (0C to
40C)
■Storage Temperature: -4F to 149F (-20C to 65C)
■Humidity: 5% to 95%, non-condensing
Ordering Information
6211-I3-200 ADSL2+ CPE Router (Broadcom), 10/100BaseT, N.A.
6211-I3-300 ADSL2+ CPE Router (Broadcom), 10/100BaseT, U.K.
6211-I3-302 ADSL2+ CPE Router (Broadcom), 10/100BaseT, EURO
6211-I3-600 ADSL2+ CPE Router (Broadcom), 10/100BAseT, Japan, (VCCI Compliant)
17 December 2010 11:30:36