Zhone 6652-A2 User manual

VDSL2 Bridged/Router
6652-A2
✓Programmable support of
plan 997, 998, FX and
China plan capable of
supporting VDSL2 profiles
8a/b/c/d, 12a/b, 17a and
30a
✓Optional U0 band for long
reach applications
✓DMT based packet mode
supports Ethernet-over
VDSL (EoVDSL) with
asymmetric line data rates
of 100Mbps downstream
and 50Mbps upstream, or
symmetric 50Mbps line
data rate.
✓Auto sensing ethernet
ports
✓Supports packet transfer
mode with HDLC or EFM
framing for EoVDSL
✓Integrated Layer 2 switch
with traffic classification
and QoS support,
including IP QoS based on
IP, physical port
✓IP routing, NAT, PAT, SPI
firewall and packet
filtering
VDSL2 Bridged/Router 4-Port Modem
The 6652-A2 is an ethernet-over-VDSL bridge modem utilizing the
Ikanos chipset that complies with carious VDSL standards, and
provides unprecedented braodband service over a single pair of
copper wire. The four 10/100 Base-T Ethernet Ports can easily connect
to any PC or LAN in a home or small office environment. Quality and
multimedia service is ensured with it's powerful traffice control and
management over layer 2 or layer 3. While the NAT/PAT technolgies
share the broadband connection to all its LAN clients for all prevailing
internet applications, the embedded firewall keeps out those malicious
attacks and intrusions. Network management is implemented so it can
be easily configured and managed by the service provider.

Technical Specifications
VDSL2 Bridged/Router
Dimensions
■W(10.03in) x D(6.29in) x H(1.65in)
Weight
■0.75lbs
Power
■Input 120~240 VAC 50/60Hz
■Output 12V 1.5A
Interfaces
■1 x RJ11 - VDSL2 uplink
■1 x USB port
■4 x RJ45 - 10Base-T/100Base-TX Ethernet
■1 x ON/OFF Power Switch
■1 x Reset
Standards Support
■VDSL
- ITU-T G.993.2 (VDSL2)
- ITU-T G.993.1 (VDSL1)
- ANSI T1-424
- ETSI TS 101 270-1
- ETSI TS 101 270-2
- China MII VDSL standard
- ITU-T G.994.1 (G.hs) based hand shaking
- Supports band plan 997, 998, FX and China
- VDSL2 profiles 8a/b/c/d, 12a/b, 17a and 30a
- EFM (IEEE802.3ah)
- Extended US0 band up to 276kHz
- VLAN to Port mapping
■Ethernet Interface
- IEEE 802.3/802.3u compliant
- Support 10/100Mbps operation
- Support half/full duplex operation
- Support IEEE 802.3u clause 28-auto
negotiation
- Support Flow Control
- Support Auto MDI/MDIX
- IP Multicast and IGMP snooping
- Support 802.1d
- IEEE 802.1q
- IEEE 802.1p
- Q-in-Q support
■Routing
- Static routes
- Dynamic routes: RIPv1 or RIPv2
- PPP client
- IGMP proxy
- DHCP server and client
■Firewall
- SPI firewall
- Access control list absed on IP and port
- Port forwarding, virtual server
- Support for one DMZ host
- ALG support including FTP, PPTP, L2TP
Protocol Support
■ITU-T G.993.2
■ITU-T G.993.1
■ANSI T1.424
■ETSI TS 101 270-1
■ETSI TS 101 270-2
■RIPv1
■RIPv2
■UPnP
■IGMP proxy
Management
■Web Interface HTTP
■Telnet
■CLI
Regulatory Compliance
■FCC Part 15/68
■UL
■CSA
■CE
■RoHS Compliant
Operating Requirements
■Temperature
■Operating: 0C to 40C / 32F to 104F
■Non-Operating: -25C to 85C / -13F to 185F
■Humidity
■Operating: 5% to 95% Relative Humidity
(Non-Condensing)
■Non-Operating: 5% to 95% Relative Humidity
(Non-Condensing)
Ordering Information
6652-A2-200 VDSL2+ 4 Port CPE5, NA
6652-A2-302 VDSL2+ 4 Port CPE5, EURO
2008/06/27 12:22:10