Zte Blade L5 User manual

1
ZTE Blade L5
Mobile Phone
Quick Start
Guide
2
LEGAL INFORMATION
Copyright © 2015 ZTE
CORPORATION.
All rights reserved.
No part of this publication may be
quoted, reproduced, translated or used
in any form or by any means, electronic
or mechanical, including photocopying
and microfilm, without the prior written
permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to
make modifications on print errors or
update specifications in this guide
without prior notice.
We offer self-service for our smart
terminal device users. Please visit the
ZTE official website (at
www.ztedevice.com) for more
information on self-service and
supported product models. Information
on the website takes precedence.
3
Disclaimer
ZTE Corporation expressly disclaims
any liability for faults and damages
caused by unauthorized modifications
of the software.
Images and screenshots used in this
guide may differ from the actual
product. Content in this guide may
differ from the actual product or
software.
Trademarks
ZTE and the ZTE logos are trademarks
of the ZTE Corporation.
Google and Android are trademarks of
Google, Inc.
The Bluetooth®trademark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such trademarks by ZTE
Corporation is under license.
micro SDHC Logo is a
trademark of SD-3C, LLC.
Other trademarks and trade names are
the property of their respective owners.
Version No. : R1.0
Edition Time : 26.02.2016
4
Getting to Know Your
Phone
Thank you for choosing the ZTE Blade
L5.
Before you start, let’s take a look at your
new phone.
Press the power button to turn on or
turn off the screen.
5
Installing the SIM
card
Follow the instructions in the figures
below to install your micro-SIM card.
Then press and hold the power button
to power on your phone.
1.Open the battery cover.
2.Insert the micro-SIM card/SD card.
Notes:SIM card slot to prevail
in kind
Before installing or replacing the SIM
card,be sure to turn off the phone.If
you're using a small card ,please buy
standardization SIM dedicated card sets
from the formal channels ,and then push
the whole sets into the slot.
Notes:SD card slot to prevail in
kind
Some applications may require a SD card
to work normally or may store certain
data on it. Therefore, it is recommended
6
that you keep a SD card installed and not
remove or replace it randomly.
Dual card device
7
Charging the phone.
Your phone’s battery should have
enough power for the phone to turn on,
find a signal, and make a few calls. You
should fully charge the battery as soon
as possible.
WARING!
Use only ZTE-approved chargers and
cables. The use of unapproved
accessories could damage your phone or
cause the battery to explode.
CAUTION:
Do not change the rechargeable battery
in your phone by yourself. The battery
can only be changed by ZTE or ZTE
authorized service provider.
8
Product Safety
Information
Don’t make or receive phone
calls while driving. Never text
while driving.
For body-worn operations,
maintain a separation of 15
mm.
Small parts may cause
choking.
This device may produce a
loud sound
Avoid contact with anything
magnetic.
Keep away from pacemakers
and other electronic medical
devices.
Turn off when asked to in
hospitals and medical
facilities.
Turn off when told to on
aircraft and at airport.
Turn off when near explosive
materials or liquids.

9
D
on’t use at gas stations.
T
his device may produce a
br
ight or flashing light.
Don’t dispose of your phone in
f
ire.
To prevent possible hearing
d
amage, do not listen at high
v
olume levels for long periods.
A
void extreme temperatures.
Avoid contact with liquids.
K
eep your phone dry.
Do not attempt to
d
isassemble.
Only use approved
a
ccessories.
Don’t rely on your phone as a
pr
imary device for emergency
c
ommunications.
10
SAR
Your mobile device is a radio transmitter
and receiver. It is designed not to
exceed the limits for exposure to radio
waves recommended by international
guidelines. These guidelines were
developed by the independent scientific
organization ICNIRP and include safety
margins designed to assure the
protection of all persons, regardless of
age and health.
The guidelines use a unit of
measurement known as Specific
Absorption Rate, or SAR. The SAR limit
for mobile devices is 2 W/kg and the
highest SAR value for this device when
tested at the head was 0.717 W/kg, and
when tested at the body was 0.838W/kg.
As mobile devices offer a range of
functions, they can be used in other
positions, such as on the body as
described in this user guide.
As SAR is measured utilizing the device’s
highest transmitting power, the actual
SAR of this device while operating is
typicallybelow that indicated above.
This is due to automatic changes to the
power level of the device to ensure it
only uses the minimum power required
to communicate with the network.
The tests are carried out in accordance
with EN 50360, EN 50566, EN 62209-1,
EN 62209-2.
11
Declaration of RoHS
Compliance
To minimize the environmental impacts
and take more responsibilities to the
earth we live on, this document shall
serve as a formal declaration that the
ZTE Blade L5 manufactured by ZTE
CORPORATION is in compliance with the
Directive 2011/65/EU of the European
Parliament - RoHS (Restriction of
Hazardous Substances) with respect to
the following substances:
1. Lead (Pb)
2. Mercury (Hg)
3. Cadmium (Cd)
4. Hexavalent Chromium (Cr (VI))
5. Polybrominated biphenyls (PBBs)
6. Polybrominated diphenyl ethers
(PBDEs)
The ZTE Blade L5 manufactured by ZTE
CORPORATION, meets the requirements
of EU 2011/65/EU.
12
Disposal of Your Old
Appliance
1. When this crossed-out wheeled bin
symbol is attached to a product, it
means the product is covered by the
European Directive 2012/19/EU.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream via
designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
For this product’s recycling information
based on WEEE directive, please send an
e-mail to [e-mail]
13
EC DECLARATION OF
CONFORMITY
It is hereby declared that
following designated product:
Product Type: WCDMA/GSM (GPRS)
Dual-Mode Digital Mobile Phone
Model No: ZTE Blade L5, Blade L5, ZTE
L5, ZTE Blade M, Blade M
Product Description: WCDMA/GSM
(GPRS) Dual-Mode Digital Mobile Phone
Complies with the essential protection
requirements of Directives on Radio and
Telecommunication Terminal Equipment
(Directive 1999/5/EC) ，Restriction of
the Certain Hazardous Substances in
electrical and electronic equipment
(Directive 2011/65/EU), Eco-design
Requirements for Energy- Related
Products (Directive 2009/125/EC) and
their amendments.
This declaration applies to all specimens
manufactured identical to the samples
submitted for testing/evaluation.
Assessment of compliance of the
product with the requirements relating
to Directive 1999/5/EC was performed
by PHOENIX TESTLAB GmbH (Notified
Body No.0700) and assessment of
compliance of the product with the
requirements relating to Directive
14
2011/65/EU was performed by Intertek
Testing Services Ltd., Shanghai and
Directive 2009/125/EC was performed
by Shenzhen ZTE Technology service
Co., Ltd. The assessments were based
on the following regulations and
standards:
R
equirement
Standard Report No.
Health and
s
afety
EN
6095
0-1:2006+A11
:
200
9+A1:2010+A1
2
:2011+A2:2013
E
N 50332-2:2003;
E
N50332-1:2000
E
N 62209-1:2006;
E
N62209-2:2010;
E
N
50566
:2013/AC:201
4
;
E
N50360:2001+A1:
201
2
E
N62479:2010
S
ET2015-19
02
0
S
ET2015-19
32
9
S
ET2015-19
50
7
EMC
EN 301 489-1
V
1.9.2;
E
N 301 489-3
V
1.6.1;
E
N 301 489-17
V
2.2.1;
E
N 301 489-7
V
1.3.1
E
N 301 489-24
V
1.5.1;
SET2015-19
31
6
15
Radio
S
pectrum
EN 301 908-1
V
6.2.1;
E
N 301 908-2
V
6.2.1;
E
N 301511 V9.0.2;
E
N 300 328 V1.8.1;
E
N300 440-1
V
1.6.1;
E
N 300 440-2
V
1.4.1
S
ET2015-19
37
8
S
ET2015-19
37
9
S
ET2015-19
50
8
S
ET2015-19
50
6
RoHS
IEC
62321
:2008+2013
151101167S
H
A-001(R1)
ErP
(EC) No 278/2009
A20150452R
P
This declaration is the responsibility of
the manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-Tech,
Industrial Park, Nanshan District,
Shenzhen, Guangdong, 518057,
P.R.China
Authorized person signing for the
company:
Yao cuifeng Quality Director Of
ZTE Corporation
Name in block letters & position in the
company
Shenzhen,6th January 2016
Place & dateLegally valid signature
16
This equipment may be
operated in: AT BE
CY CZ DK EE FI FR
DE GR HU IE IT LV
LT LU MT NL PL PT
SK SI ES SE GB IS
LI NO CH BG RO TR