For Windows OS
Your system will start the software setup process automatically when you connect the modem to your
computer correctly. Follow the system prompts to complete the software installation.
Notes:
If the system does not launch installation automatically, you can run the installation program in path of
My Computer > Ncell Connect.
For Mac OS
The system will automatically display a Ncell Connect CD-ROM icon on the desktop, when you
connect the modem to your computer correctly. Double click the installation software package in the
Ncell Connect, and follow the system prompts to complete the software installation.
Safe removal from your system
Please close the application software, and then you can pull out the USB Modem safely.
How to use your modem
Various icons are presented to enable quick operation of the following functions:
Connect Connect to the Internet.
SMS Click New button, enter recipient’s number and content, and then click
Send to send new message.
Phonebook Click New to ll in a new contact person and contact details.
Settings Set the conguration for the USB modem.
Data records Show the connection information.
Warning and Notice
To the owner
• Some electronic devices are susceptible to electromagnetic interference sent by modem if
inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer
of the device before using the modem if necessary.
• Operating of laptop and desktop PCs and the modem may interfere with medical devices like
hearing aids and pacemakers. Please always keep them more than 20 centimeters away from
such medical devices when they are turned on. Turn the modem off if necessary. Consult a
physician or the manufacturer of the medical device before using the modem.
• Be aware of the usage limitation when using a modem at places such as oil warehouses or
chemical factories, where there are explosive gases or explosive products being processed. Turn
off your modem if required.
• The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in
hospitals. Please observe and obey all warning signs and switch off your modem in these
conditions.
• Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s
performance.
• Store the modem out of the reach of little children. The modem may cause injury if used as a toy.
• Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is working.
Using your USB Modem
• Please use original accessories or accessories that are authorized. Using any unauthorized
accessories may affect your modem’s performance, and violate related national regulations about
telecom terminals.
• Avoid using the modem near or inside metallic structures or establishments that can emit
electromagnetic waves. Otherwise it may inuence signal reception.
• The modem is not waterproof. Please keep it dry and store in a shady and cool place.
• Do not use the modem immediately after a sudden temperature change. In such case, it will
produce dew inside and outside the modem, so don’t use it until it becomes dry.
• Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be
damaged.
• No dismantling by non-professionals and only qualied technicians can undertake repair work.
• Operating temperature range of -10°C ~ + 55 °C and humidity range of 5% ~ 95% are
recommended.
5. Connect the Modem to your laptop or desktop PC.
Rotate the USB connector and plug the USB connector into your computer’s USB port. Make
sure that it is tightly inserted.
The OS automatically detects and recognizes new hardware and starts the installation wizard.
Software Installation Guide
On different operating systems, the installation procedures may be difference. Follow the system
prompts during operation.
