Zte MF271 User manual

MF271 Rogers Rocket Hub

2

1
LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, electronic
or mechanical, including photocopying and microlm, without
the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the
right to make modications on print errors or update specica-
tions without prior notice.
Version No. : R1.0

2
Getting to Know Your Device
The device operates on the 4G/3G/HSPA+/LTE networks and
supports voice and data service.
Indicators

3
Indicator State Description
(Power
& battery)
Green steady External power supply is
working normally
Green
blinking
Battery power is more than
50%
Yellow blinking Battery power is less than
20%-50%.
Red
blinking
Battery power is less than
20%
Off Power is off or external power
supply is working abnormally.
(Voice-
mail)
Green blinking New voicemail.
Off No new voicemail.
(Infor-
mation)
Green blinking
Check Web UI: New SMS,
data balance, Micro-SIM is-
sue and etc.
Off No need to check Web UI.

4
(Wi-Fi)
Green steady Wi-Fi works normally with no
data transmission.
Green blinking Wi-Fi works normally with
data transmission.
Off The Wi-Fi function is dis-
abled.
(Signal
strength)
Green steady Signal strength is strong.
Yellow steady Signal strength is weak.
Red steady No service, limited service or
searching for service.
Red
blinking
Micro-SIM checking, Micro-
SIM error or other abnormal
status

5
Interface Description
Port/Button Description
1. WPS Press to enable the Wi-Fi Protected
Setup.
2. PHONE1/PHONE2 Standard RJ11 connector for tele-
phone.
3. ETHERNET Ethernet connector for computer.
4. POWER INPUT Connector to the external power
supply.
5. ON/OFF Turn the device ON or OFF.

6
Installation Guide
Installing the Micro-SIM Card and battery
1. Slide the back cover and remove it
2. Insert the Micro-SIM card.

7
3. Insert the battery.
4. Replace the back cover.
Connecting Your Devices
Follow the numbers to connect your devices.

8
Switching On Your Device
1. Turn the ON/OFF button on to get started. Make sure that
the phone is on hook before you power it on.
2. Wait 1 ~ 2 minutes and then the Power and battery indica-
tor should be lit on.
Connecting to the Internet
Via Ethernet
Go to your favorite website on the PC connected to your de-
vice via Ethernet cable to conrm your Internet connection.
Via Wi-Fi
1. Use the Wi-Fi application on a client to search for avail-
able wireless networks.