3-form Edge SimpleSpec 300.31 User manual

For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

Contents Overview
Required Tools
Drill Drill Bits Level ToolTape Measure Screwdrivers
(8)
Fin
(2)
Installation Stands
(3)
Rail
White: 3-7-14
Light Wood Stain: 3-70-013
(6)
Wall Bracket
37-16
(6)
Rail Bracket
37-17
(12)
Drywall Anchor
#8  1⅜
3151927
(12)
SMS Pan Head
#8  1½
3151928
Rampa Screw
37-20
*Pre-installed in
Rail (3-70-014)
(9)
M6 × 25 Bolt
37-19
(12)
#8  0.5" Pan Head
37-18
2
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

Overview
Each coniguration shows two (2) Ready To Go solutions with a resulting footprint of 84" wide  96" high. These are made from
two(2) side by side modules, each 42" wide  96" tall.
Edge Uniform (Wall and Ceiling)
Max Fin Depth 6.25" (159mm)
Coniguration A
U.U.U.U.U.U.U.U.U.U.U.U.U.U.U.U.
Number Location
on Fins
(Top Rail Slot)
Contour (Wall and Ceiling)
Max Fin Depth 9.25" (229mm)
Coniguration A
1.2.3.4.5.6.7.8.9.1.11.12.13.14.15.16
Coniguration B
13.14.15.16.1.2.3.4.5.6.7.8.9.1.11.12
Coniguration C
4.15.3.12.1.6.7.13.16.2.14.5.9.11.8.1
Fan (Wall and Ceiling)
Max Fin Depth 9.25" (229mm)
Coniguration A
1.2.3.4.5.6.7.8.9.1.11.12.13.14.15.16
Coniguration B
13.14.15.16.1.2.3.4.5.6.7.8.9.1.11.12
Coniguration C
4.15.3.12.1.6.7.13.16.2.14.5.9.11.8.1
Stepped (Wall and Ceiling)
Max Fin Depth 6.25" (159mm)
Coniguration A
4.3.2.1.1.2.3.4.5.6.7.8.8.7.6.5.
Coniguration B
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1.
Coniguration C
8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8.
3
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

Overview cont...
Each coniguration shows two (2) Ready To Go solutions with a resulting footprint of 84" wide  96" high. These are made from
two(2) side by side modules, each 42" wide  96" tall.
Angle (Wall and Ceiling)
Max Fin Depth 9.25" (229mm)
Coniguration A
8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8.
Coniguration B
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1.
Arc (Wall and Ceiling)
Max Fin Depth 9.25" (229mm)
Coniguration A
8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8.
Coniguration B
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1.
Coniguration A
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1
Diagonal (Wall and Ceiling)
Max Fin Depth 9.25" (229mm)
Coniguration B
8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8
A B
Coniguration A
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1
Jagged (Wall and Ceiling)
Max Fin Depth 9.25" (229mm)
Coniguration B
8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8
A B
Coniguration A
1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1
Hourglass (Wall and Ceiling)
Max Fin Depth 9.25" (229mm)
Coniguration B
8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8
A B
4
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

Installation
2Install Edge Fins into Installation Stands
1Set Up Installation Stands
View from Side
Follow proper in numbering sequence as noted on pages 34.
5
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

Installation
3-70-014
3Insert Rails into the Fins
Insert the rails into the ins as shown.
Then install bolts (37-19) into the rails in the pre-installed rampa inserts.
4Expand Rails to Lock Fins in Slots
6
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

X
" mm
"
mm
" mm
Y
"
mm
"
mm
" mm
" mm
" mm
X is the center of
top rail position,
Y is the gap between
the loor and the
bottom of the ins.
X = 90" + Y
X
Floor
"
mm
"
mm
" mm
5Mark Walls for Wall Bracket Installation
Installation
ba
When installing models end to end (meaning the ends of the ins are lining up) 3form recommends to leave a ½"  1" gap
between modules to avoid any aesthetic variation due to the ins not perfectly aligning caused by material or installation
variance. The wall also may need to be leveled before installing the systems so that modules align one to the other.
7
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

7Attach Rail Brackets to Back of Edge Rail
6Attach Wall Brackets to Wall Using Marks
Installation
3-70-016
3-70-017
3-70-017
Center Rail Brackets around largest holes on back of edge rail
8
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

Installation
8Hang Edge Fins onto Wall
Position ins in front of wall to be
installed
Lift upwards above brackets, and
then push backwards until there is
contact with the wall.
Carefully let the ins down making
sure that all of the rail clips engage
with the wall clips.
9
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

9How to Shorten a Section of Edge Walls
When less than the full width of Edge (<42") is needed, you must cut down the rails of the edge product. Follow the
instructions below for best results.
*For rails with less than 4 ins, you must drill a new count-
er-bored hole and through hole for the Rampa insert for
expanding the rails.
• First counter-bore with a ½" diameter brad point drill
bit to a depth of ⅜" (9.5mm)
• Next drill all the way through with a ¼" diameter brad
point drill bit
Determine the number of ins needed (or your maximum
length). See chart below.
ba If you are mounting next to another assembly of
Edge, its important to identify the side of the rails
that will meet up with the existing ins. When you cut
the rail, it will leave exposed wood, so this will need
to be mounted against the existing system. If you are
NOT mounting adjacent to another system, you will
need to paint the side of the rail that is cut.
cMark your rail for your desired cut. See dimensions
in Step 9a, based on the number of Fins you want.
# of Fins Distance
*  ¼"
*  ½"
*  ¾"
* "
  ¼"
  ½"
  ¾"
 "
dInstall modiied rail, with cut side facing existing
Edge system.
Installation
10
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

Play with Varia in a whole new way with Edge. The easy-to-install, modular system comes in nine conigurations, and can be
customized to it any space – as a wall treatment, ceiling element, or partition system.
Features and Beneits
• Many beautiful design options
• Extremely easy to assemble and disassemble
• Very tough and durable
Edges Fins have been independently tested and meet the
criteria for approved interior inishes and light transmitting
resin as described in the 2015 International Building Code®.
Flammability and Smoke Test Results
- Building Code Approvals
F
Self
Extinguishing
F
Flame Class
- HB
Pass


Pass


Edge
Pass F
Pass CC
Pass F
Pass
Not more toxic
than wood
Class B: -
≤
Pass
Class A: -
≤
Result
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Varia Ecoresin
Sola Felt
Material
ASTM D  Smoke Density
Test
ASTM D  Flame Spread
ASTM D  Self-ignition
UL
UPITT Mortality Test
ASTM E-
Flame Spread, /" thickness
Smoke Generated
NFPA /" thickness
ASTM E-
Flame Spread, /" thickness
Smoke Generated
Panel Weight
 lb/ft kg/m
Weight Flux
 lb/ft kg/m
Material
Varia Ecoresin
Sola Felt
/" mm
Thickness
/" mm
Panel Sizes and Tolerances
Linear patterns in Varia Ecoresin panels have a skew tolerance
of ¼" skew over 48". Panels containing a pattern (Capiz,
Timber, etc.) will not match up from piece to piece.
*Edge materials are cut to a tolerance of ±⅓"
Flatness Tolerance
Edge panels shall not have distortion in the form of a wrinkle,
twist or scallop along the perimeter of the sheet. Overall warp
extending across the sheet is permitted to a maximum of ⁄"
(7.14 mm) for each 48" (1.2 m) or fraction thereof. Panel is to be
measured when laying horizontally under its own weight on a
lat continuous surface.
Edge Fins come in 9 standard conigurations – Uniform, Con-
tour, Fan, Stepped, Angle, Arc, Diagonal, Jagged, Hourglass
(shown in more detail on page 3). Fins can be installed in
various sequences to provide a unique aesthetic within each
coniguration. Also, customization of the in size is available.
Edge is available as a wall, ceiling, or partition installation.
Each of the nine in conigurations are identical for wall and
ceiling. Partition is two sided so the look is similar on both
sides.
Available Conigurations
Available Textures/Finishes
3form Edge in Varia Ecoresin comes standard with both a
front and back Sandstone inish. Sandstone is a durable inish
that has a subtle grainy texture with a slightly frosted look.
*The Varia Ecoresin system panels utilizing natural products
as a decorative inter-layers may change in appearance over
time. Natural materials are also subject to inherent inconsis-
tency in color, texture and shape.
Acoustic Rating
N/A
SAA

Material
Varia Ecoresin
Sola Felt
N/A
NRC

N/A
Alpha-W
.
Product Description and Speciications
Available Colors
Edge Fins can be speciied in a variety of color options.
See 3form’s Sola Felt colors at:
https://www.3-form.com/materials/sola-felt
11
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge

Cleaning: Varia Ecoresin
3form Varia Ecoresin ins should be cleaned periodically. A
regular, seasonal cleaning program will dramatically help
prevent noticeable weathering and dirt build-up. 3form
recommends the use of the following common cleaning
products: Windex, Formula 409, Simple Green, Fantastik,
Virex, 10:1 Water/Bleach Solution.
Rinse the sheets with lukewarm water. Remove dust and
dirt from Varia Ecoresin with a soft cloth or sponge and a
solution of mild soap and/or liquid detergent in water. A 50:50
solution of isopropyl alcohol and water also works well. Rinse
thoroughly with lukewarm water.
Do:
• Always use a soft, damp cloth to blot dry. (Rubbing with
a dry cloth can scratch the material and create a static
charge)
Do not:
• Use scrapers or squeegees on Varia Ecoresin.
• Use scouring compounds, gasoline, benzene, acetone,
carbon tetrachloride, certain deicing luids, lacquer
thinner or other strong solvents.
• Use highly alkaline or abrasive cleaning agents.
• Rub with a dry cloth.
Cleaning: Felt
To remove airborne debris and dust, it is recommended to
periodically vacuum Felt Edge ins. Please note the slight
shedding of ibers from the Felt is normal and not indicative of
any defect.
Important! If a cleaning material is found to be incompatible
in a short-term test, it will usually be found to be incompatible
in the ield. The converse, however, is not always true.
Favorable performance is no guarantee that actual end-use
conditions have been duplicated. Therefore, these results
should be used as a guide only and it is recommended that
the user test the products under actual end use conditions.
Usage Limitations
Do not use cyanoacrylate or solvent type thread locking
materials with Varia Ecoresin. To more permanently secure
hardware, use the recommended products from the 3form
Adhesives Matrix.
Edge Sealing (Varia Ecoresin Only)
Certain Varia Ecoresin designed layers (organics, papers and
fabrics in particular) can wick moisture over time if the edges
become wet and are not adequately sealed. These Varia
Ecoresin products should not be exposed to water or wet
conditions without irst applying an approved edge sealing
treatment.
Product Description and Speciications cont...
12
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2021 | MANRTG30031 | REV 005 © 2021 3form, Inc. All rights reserved.
SimpleSpec 300.31tm Installation Manual
Edge