3M 3M-Matic 7000a-I Datasheet

International - ENG
February 2021
3M-Matic™7000a-I / 7000a3-I Pro - Type 11700
Page i
44-0009-2164-1 / ECO# 0078045
Important Safety Information
BEFORE INSTALLING OR OPERATING THIS EQUIPMENT
Read, understand and follow all safety and operating instructions.
Spare Parts
It is recommended you immediately order the spare parts listed in the “Spare
Parts/Service Information” section. These parts are expected to wear through
normal use, and should be kept on hand to minimize production delays.
Serial #:
For reference, record machine serial number here.
Original Instructions
Source Document for all related Manuals/Translations
Instructions and Parts List
3M-Matic™
7000a-I / 7000a3-I Pro
Type 11700
Adjustable Case Sealer with
AccuGlide™
3
Taping Heads

International - ENG
February 2021
3M-Matic™7000a-I / 7000a3-I Pro - Type 11700 Original Instruction
Page ii Source Document for all related Manuals/Translations
44-0009-2164-1 / ECO# 0078045

International - ENG
February 2021
3M-Matic™7000a-I / 7000a3-I Pro - Type 11700 Original Instruction
Page iii Source Document for all related Manuals/Translations
44-0009-2164-1 / ECO# 0078045
Replacement Parts and Service Information
To Our Customers:
This is the 3M-Matic™/AccuGlide™/Scotch®equipment you ordered.
It has been set up and tested in the factory with Scotch®Tapes.
If technical assistance or replacement parts are needed, call or fax
the appropriate number listed below.
Included with each machine is an Instructions and Parts List Manual.
Technical Assistance/Replacement Parts and Additional Manuals:
Contact your local service provider.
Provide the customer support coordinator with the model/machine name,
machine type, and serial number that are located on the identication plate
(For example: Model 7000a-I / 7000a3-I Pro - Type 11700 - Serial Number 13282).
Identi cation Plate

International - ENG
February 2021
3M-Matic™7000a-I / 7000a3-I Pro - Type 11700 Original Instruction
Page iv Source Document for all related Manuals/Translations
44-0009-2164-1 / ECO# 0078045

1 July 2021
EU DECLARATION OF CONFORMITY
Original
Name and address of the manufacturer and, where applicable, his authorised representative:
3M Deutschland GmbH, Closure and Masking Systems Division
Carl-Schurz-Strasse 1
D41453 Neuss, Germany
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product model/product (product, type, batch or serial number):
7000a-I, 7000a3-I, 7000r-I, 7000r3-I, 7000a-I Pro, 7000a3-I Pro, 7000a6-I Pro, 7000r-I Pro, 7000r3-I Pro, 8000a-I,
8000a3-I, 800asb-I, 8000asb-I, 8000ab-I, 8000ab3-I, 8000at-I, 8000at3-I,8000af-I, 8000af3-I
Object of the declaration
3M-Matic Case Sealers, Serial Numbers: 50000– through –999999
The object of the declaration described above is in conformity with the relevant Union harmonisation: legislation
Machinery Directive: 2006/42/EC
EMC Directive: 2014/30/EU
RoHS Directive: 2011/65/EU
References to the relevantharmonised standards used or references to the other technical specications inrelation to which conformity is
declared. References must be listed with their identication number and version and, where applicable, date of issue:
Safety:
EN ISO 12100:2010 Safety of machinery. General principles for design. Risk assessment and risk
reduction
EN 60204-1:6.0:2016 Safety of machinery. Electrical equipment of machines. General
requirements
EN ISO 13849-1:2015 Safety of machinery. Safety-related parts of control systems. Part 1.
General principles for design
EN ISO 11202:2010/AMD 1:2020 Acoustics — Noise emitted by machinery and equipment. Determination
     ofemissionsoundpressurelevelsataworkstationandatotherspecied
positions – w/corrections
EMC:
EN 61000-6-2: 3.0:2016 Electromagnetic compatibility (EMC). Generic standards. Immunity
standard for industrial environments
EN 61000-6-4:2018 Electromagnetic compatibility (EMC). Generic standards. Emission standard
for industrial environments
Signed for and on behalf of:
Signature: Date: Place:
Name of Signer: Title:
Person authorized to compile the technical le, established in the Community:
Name and Title: Address:
Mr. Benno Staudenmeir
Product Responsibility Specialist
3M Deutschland GmbH, CTC-Competence Centre,
Carl-Schurz-Strasse 1
D41453 Neuss, Germany
Neuss, Germany
Vice President, EMEA Research and Development
Camila Cruz Durlacher