3M 40800 Datasheet

"3M-Matic"and "AccuGlide" are Trademarks of,
3M St. Paul, MN 55144-1000
Printed in U.S.A.
© 3M 2010 44-0009-2079-1 (B011110-NA)
Serial No.
For reference, record machine serial number here.
Important Safety
Information
Spare Parts
™
3M-Matic™BEFORE INSTALLING
OR OPERATING THIS
EQUIPMENT
Read, understand, and
follow all safety and
operating instructions.
It is recommended you
immediately order the
spare parts listed in the
"Spare Parts/Service
Information" section.
These parts are expected
to wear through normal
use, and should be kept
on hand to minimize
production delays.
3M Industrial Adhesives and Tapes
3M Center, Building 220-5E-06
St. Paul, MN 55144-1000
Instructions and Parts List
700rks Type 40800
Random
Case Sealer
with
AccuGlide 3
Taping Heads

This instruction manual covers safety aspects,
handling and transport, storage, unpacking,
preparation, installation, operation, adjust-
ments, maintenance, troubleshooting, repair
work and servicing plus parts list of the
3M-MaticTM 700rks-NA Random case sealer.
3M Industrial Adhesives and Tapes
3M Center, Building 220-5E-06
St. Paul, MN 55144-1000
Edition January 2010
Copyright 3M 2010
All rights reserved
The manufacturer reserves the right to change
the product at any time without notice.
2010 January
700rks-NA

3M-Matic™, AccuGlide™and Scotch™are Trademarks of
3M St. Paul, MN 55144-1000
Printed in U.S.A.
© 3M 2010 44-0009-1851-4 (H031008-NA)
3M Industrial Adhesives and Tapes
3M Center, Building 220-5E-06
St. Paul, MN 55144-1000
To Our Customers:
This is the 3M-Matic™/AccuGlide™/Scotch®equipment you ordered. It has been set up and tested in
the factory with Scotch®tapes. If technical assistance or replacement parts are needed, call or fax the
appropriate number listed below.
Included with each machine is an Instructions and Parts List manual.
Technical Assistance / Replacement Parts and Additional Manuals:
Contact your local service provider. Provide the customer support coordinator with the model/machine
name, machine type, and serial number that are located on the identification plate (For example: Model
700rks - Type 40800 - Serial Number 13282).
Minimum billing on parts orders will be $25.00. Replacement part prices available on request.
$10.00 restocking charge per invoice on returned parts
Identification Plate
Replacement Parts and Service Information
i
Replacement Parts and Additional Manuals
Order parts by part number, part description, and quantity required.
When ordering parts or additional manuals, include model/machine name,
machine type, and serial number that are located on the identification plate
(For example: Model 700rks - Type 40800 - Serial Number 13282).
3M Tape Dispenser Parts
241 Venture Drive 1-800-344-9883
Amery, WI 54001-1325 Fax: [phone]

THIS PAGE IS BLANK

3M-Matic™, AccuGlide™and Scotch™are Trademarks of
3M, St. Paul, MN 55144-1000
Printed in U.S.A.
© 3M 2010 44-0009-1852-2 (F031008-NA)
3M Industrial Adhesives and Tapes
3M Center, Building 220-5E-06
St. Paul, MN 55144-1000
ii
Replacement Parts And Service Information
To Our Customers:
This is the 3M-Matic™/AccuGlide™/Scotch®equipment you ordered. It has been set up
and tested in the factory with Scotch®tapes. If any problems occur when operating this equipment and
you desire a service call or phone consultation, call, write, or fax the appropriate number listed below.
Included with each machine is an Instructions and Parts List manual.
SERVICE, REPLACEMENT PARTS, AND ADDITIONAL MANUALS
AVAILABLE DIRECT FROM:
Order parts by part number, part description, and quantity required. Also, when ordering parts
or additional manuals, include model/machine name, machine type, and serial number that are
located on the identification plate.

THIS PAGE IS BLANK

TABLE OF CONTENTS - MANUAL 1: 700rks Random Case Sealer
(For Taping Head Information - See MANUAL 2: AccuGlide™ 3 Taping Heads - 3 inch)
700rks Random Case Sealer Page
Cover Page
Replacement Parts and Service Information ........................................................................i - ii
Table of Contents ................................................................................................................. iii - v
Acronyms and Abbreviations ................................................................................................vi
1. Introduction
1.1 Manufacturing Specifications / Description / Intended Use
.........................................1 - 2
1.2 How to Read and Use the Manual ............................................................................... 2
1.2.1 Importance of the Manual .................................................................................. 2
1.2.2 Manual Maintenance ......................................................................................... 2
1.2.3 Consulting the Manual ........................................................................................ 2
1.2.4 How to Update the Manual in Case of Modifications ...........................................2
2. General Information
2.1 Identification Data .........................................................................................................3
2.2 After-Sale Service .........................................................................................................3
2.3 Warranty / Contents ......................................................................................................4
3. Safety
3.1 General Safety Information ...........................................................................................5
3.2 Signal Words Explanation ............................................................................................. 5
3.3 Table of Warnings ..........................................................................................................6 - 7
3.4 Operator’s Qualifications Definition ..............................................................................8
3.5 Number of Operators ....................................................................................................8
3.6 Safe Use of the Machine Instructions ...........................................................................8
3.7 Residual Hazards ..........................................................................................................8
3.8 Prevent Other Hazards - Recommendations and Measures ........................................8
3.9 Personal Safety Measures ...........................................................................................8
3.10 Incorrect / Predictable Actions Not Allowed ..................................................................8
3.11 Operator's Required Skill Levels .................................................................................. 9
3.12 Component Locations .................................................................................................. 10
3.13 Table of Warnings and Replacement Labels ................................................................11 - 13
4. Technical Specifications
4.1 Power Requirements ....................................................................................................14
4.2 Operating Rate .............................................................................................................14
4.3 Operating Conditions ....................................................................................................14
4.4 Tape ..............................................................................................................................14
4.5 Tape Width ....................................................................................................................14
4.6 Tape Roll Diameter .......................................................................................................15
4.7 Tape Application Leg Length - Standard .......................................................................15
Tape Application Leg Length - Optional
4.8 Box Board .....................................................................................................................15
4.9 Box Weight and Size Capacities ................................................................................... 16
4.10 Machine Noise Levels ...................................................................................................17
4.11 Machine Dimensions ..................................................................................................... 17
4.12 Set-Up Recommendations ............................................................................................17
iii 2010 January
700rks-NA

8
THIS PAGE IS BLANK

TABLE OF CONTENTS (continued)
i
5. Shipment, Handling, and Storage
5.1 Packed Machine Shipment and Handling ...........................................................................19
5.2 Overseas Shipment Packaging (Optional) ..........................................................................19
5.3 Handling and Transportation of Uncrated Machine .............................................................19
5.4 Machine Storage .................................................................................................................19
6. Unpacking
6.1 Uncrating .............................................................................................................................20
6.2 Packaging Materials Disposal .............................................................................................20
7. Installation
7.1 Operating Conditions ..........................................................................................................21
7.2 Space Requirements for Machine Operation and Maintenance .........................................21
7.3 Tool Kit Supplied with the Machine .....................................................................................21
7.4 Machine Positioning / Bed Height .......................................................................................21
7.5 Plastic Ties Removal ...........................................................................................................22
7.6 Assembly Completion / Machine Set-Up ............................................................................. 22 - 24
7.7 Infeed Conveyor Assembly .................................................................................................25
7.8 Centering Guides ................................................................................................................25
7.9 Outboard Tape Roll Mounting ............................................................................................ 25
7.10 Tape Leg Length ................................................................................................................ 25
7.11 Bumper Supports .................................................................................................................26
7.12 Box Size Capacity ..............................................................................................................26
7.13 Electrical Connection and Controls ....................................................................................26
7.14 Initial Start-Up .................................................................................................................... 26
7.15 Controls, Valves, and Switch Component Locations ..........................................................27 - 29
7.16 Tape Loading / Threading ....................................................................................................29
7.17 Theory of Operation ........................................................................................................... 29 - 30
7.18 Box Sealing ........................................................................................................................30
7.19 Taping Heads Completion .................................................................................................31
7.20 Outboard Tape Roll Holder .................................................................................................31
7.21 Preliminary Electric Inspection ............................................................................................31
7.22 Main Power Machine Connection and Inspection ...............................................................31
7.23 Phases Inspection ...............................................................................................................31
8. Theory of Operation
8.1 Working Cycle Description ..................................................................................................32
8.2 Running Mode Definition .....................................................................................................32
8.3.1 Normal Stop Procedure .............................................................................................32
8.3.2 Emergency Stop ....................................................................................................... 32
9. Controls
9.1 Electrical / Drive Belt On-Off Switch ................................................................................... 33
9.2 Emergency Stop Button (Latching) .....................................................................................33
9.3 Main Air On-Off Valve / Regulator / Filter .............................................................................33
9.4 Upper Drive Raising Switch ................................................................................................34
9.5 Air Pressure Regulator / Top Drive Force Adjustment ........................................................ 34
9.6 Upper Drive Assembly Actuator Switch ...............................................................................34
9.7 Box Conveying / Tape Seat Application ............................................................................... 35
10. Safety devices
10.1 Blade Guards ..................................................................................................................... 36
10.2 Emergency Stop Button ..................................................................................................... 36
10.3 Electric System ...................................................................................................................36
iv
700rks-NA 2010 January

iv
THIS PAGE IS BLANK