3M S-200 Maintenance manual

3M™Powered & Supplied Air Respirators
3
Care and Maintenance
Before Use
•Inspect Regulator assembly for cracks or loose
connectors
•Inspect Breathing Tube – ensure it is free from splits
or holes
Replace if necessary
•Inspect Belt – ensure it is free from splits or tears and
the buckle is undamaged
•Examine tubes and connectors for cracks and the
seals/sealings rings for damage
•Examine the 3M Compressed Air Supply Tube for
damage
•The facepiece should be inspected as per the user
instructions
Monthly
•Carry out all the ‘Before Use’ inspections and create
record of this monthly check for the regulator
After Use
•Clean casing with cloth dampened with a mild
solution of water and liquid household soap
•Disinfect with 3M™105 Wipes
•Store in a dry, clean area / locker away from direct
sunlight, high temperatures and solvents
REPLACE ALL DAMAGED PARTS IMMEDIATELY TO
ENSURE CORRECT LEVELS OF PROTECTION
To maintain protection levels, optimise the effective lifetime of the system and avoid the additional
cost of replacement, it is extremely important to carry out regular checks and maintenance on
Powered and Supplied Air Respirators.
3M™S-200 Supplied Air
Respiratory System
When the S-200 system is combined with an approved 3M™Facepiece it forms a supplied air apparatus for
respiratory protection.

Occupational Health & Environmental Safety Group
3M United Kingdom PLC
3M Centre,
Cain Road, Bracknell
Berkshire RG12 8HT
Tel: [phone]
www.3M.com/uk/ohes
3M Ireland Limited
The Iveagh Building
The Park
Carrickmines
Dublin 18
Tel: [phone]
Please recycle.
Printed in the United Kingdom.
© 3M 2009. All rights reserved.
3M Part Number
3M S-200 Supplied Air Regulator 3M S-200
10m Air Supply Tube 3M C-251
20m Air Supply Tube 3M C-252
30m Air Supply Tube 3M C-253
1.2m Spray Gun Hose Kit 3M C-231
Regulator Assembly - S-200 3M S-211
Breathing Tube - S-200 3M S-221
Belt - S-200 3M C-326
The 3M S-200 is compatible with a range of 3M Half Face and Full Face respirators
Ordering Consumables, Repair Parts and Accessories
To request a quote or place an order for these items, please
contact your 3M Approved Distributor.
Further Information and Advice
If you require additional guidance on the Care and
Maintenance of your 3M Powered and Supplied Air Equipment,
please contact the Helpline or your local 3M representative.
3M Health and Safety Helpline
0870 60 800 60 (UK)
1 800 320 500 (Ireland)