A-Tach Mounts 20025 User manual

A-Tach # 20025
Designed for: RAM Trucks 1500-5500 2013 - 2018
ST-1 A-Tach
Mobile Device Mounts
NOTICE: A-Tach Mounts will not be responsible for
any damage to the vehicle due to the installation
and/or use of the product. The product has been
tested to fit securely to the listed vehicles.
Instructions are provided for your convenience.
You are responsible for the use of the product and
to determine if you have the skill to attach the
product without causing damage to your vehicle or
the product.
Read all instructions and view the photos before
attaching this product.
WARNING: Please hold the vehicle mount and holster over the place where the solution attaches to the
dash BEFORE securely attaching it to the vehicle. This will insure you like the fit and location of the solution.
(1) The holster comes with a two part securing strap
for the hand gun. Place your hand gun into the
holster. Then snap the two parts of the strap
together and place the strap in a position that will
secure the hand gun into the holster.
(2) Slide the hooked parts of the Velcro on the
strap into the slots on the sides of the holster.
Using the included blue card stock will help. The
strap is adjustable by the distance the straps are
inserted into the slots. Be sure to align the hooked
parts of the Velcro with the mesh parts to create a
secure connection.
(3) Attach the
holster to the
mount by inserting
the clip arm on the
mount through the
clip slot on the
side of the holster.
Photo is for
illustration and
might not show
the actual mount.
(4) The top of
the mount
will attach
into the seam
illustrated in
the photo to
the left. It is
to the left of
the steering
wheel and
between the
upper and
lower dash panels.
Returns
Before any product may be returned, A-Tach's must give prior approval. An RMA# (Return Merchandise
Authorization Number) needs to be given to the buyer to return a product. All returns must be within (30) days of
the invoice date and include proof of purchase. Any returned product must be undamaged and in like new
condition. Returned product must be scratch free with no additional holes or screw marks on the product.
A-Tach reserves the right to withhold any refund if the product is believed to be damaged. A return must include a
copy of the original order or invoice. All parts and components that were shipped with the original product must be
included with the returned.

(4) The lower side of the mount will attach with a
screw that holds the bottom of the dash panel to
the truck frame. See arrow in photo. Remove the
screw with a Phillips screw driver.
(5) Inspect the area the SAMS will attach to ensure
it will not be an obstruction. Clean the area where
the mount will attach. Remove the covering from
the tape. With the included seam tool gently press
the dash panel open.
(4) Open the seam just enough to insert the thin
upper edge of the mount into the opened seam.
(See Photo) The tape will not leave any residue if
the mount is removed in the future.
(5) Flex the mount down so the hole in the bottom
of the mount aligns with the hole the dash screw
was removed from. Securely fasten the mount and
dash panel back on with the screw.
A-Tach Mounts Limited Warranty
A-Tach warrants the product to be free of all defects in materials and workmanship for a period of six (6) months
from the date of purchase. This warranty extends to the original buyer. Damaged products caused by anything
outside of shipping damage are not covered by this warranty.
Within the period of this warranty, A-Tach has the option to repair or replace the item or refund the purchase price.
Any replacement parts will be done on an exchange basis. All repairs and service must be done by A-Tach. Product
must be delivered to A-Tach during the warranty time along with proof of purchase price and date. The shipping
and packaging costs will be the buyer’s responsibility. Labor costs and parts to repair will be A-Tach Mounts
responsibility.
A-Tach Mounts will not be responsible for any damage to the vehicle or product due to the installation and/or use of
the product. A-Tach is not responsible for damages caused by extreme heat conditions. Any above exclusion may
not apply in states that do not allow the exclusion or limitation. This warranty gives you specific legal rights. You
also may have other rights which vary from state to state.
Returns
Before any product may be returned, A-Tach must give prior approval. An RMA# (Return Merchandise
Authorization Number) needs to be given to the buyer to return a product. All returns must be within (30) days of
the invoice date and include proof of purchase. Any returned product must be undamaged and in like new
condition. Returned product must be scratch free with no additional holes or screw marks on the product.
A-Tach reserves the right to withhold any refund if the product is believed to be damaged. A return must include a
copy of the original order or invoice. All parts and components that were shipped with the original product must be
included with the returned product.
Contact Information: A-Tach Mounts / Clarkston, WA 99403 / [e-mail]