Aaeon GENE-U15B User manual

SubCompact Board GENE-U15B
GENE-U15B
Intel
® Atom™Z5x0P Processor
Intel®System Controller Hub US15WP
10/100/1000Base-TX
1 SATA 3.0Gb/s, Onboard SST SSD
4 COM, 6 USB2.0, Digital I/O
1MiniCard
GENE-U15B Manual Rev.A 2nd Ed.
June 2011
All manuals and user guides at all-guides.com
all-guides.com

SubCompact Board GENE-U15B
i
Copyright Notice
This document is copyrighted, 2011. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in
this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
Award is a trademark of Award Software International, Inc.
CompactFlash™ is a trademark of the Compact Flash
Association.
Intel®, Atomare trademarks of Intel®Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
SoundBlaster is a trademark of Creative Labs, Inc.
All other product names or trademarks are properties of their
respective owners.
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
1700060157 Keyboard & Mouse Cable
CD-ROM for manual (in PDF format) and drivers
GENE-U15B
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-3
1.3 Specifications............................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors & Jumpers...........................2-3
2.3 Mechanical Drawing..................................................2-5
2.4 List of Jumpers..........................................................2-7
2.5 List of Connectors .....................................................2-7
2.6 Setting Jumpers ........................................................2-9
2.7 LVDS Inverter Voltage Selection (JP1).....................2-10
2.8 LVDS Panel +5V/+3.3V Selection (JP2)...................2-10
2.9 LVDS-Inverter +5V/+12V Selection (JP3).................2-10
2.10 COM2 Ring/+5V/+12V Selection (JP4)...................2-10
2.11 Touch Panel 4/5/8-wire Selection (JP5)..................2-10
2.12 CPLD Reset Selection (JP6)...................................2-11
2.13 Auto Power Button / Front Panel Button Selection (JP7)
.........................................................................................2-11
2.14 CMOS Selection (JP8)............................................2-11
2.15 CRT Always On Disable/ Enable (JP9)...................2-11
2.16 LVDS LCD Connector (CN5) ..................................2-11
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
v
2.17 LVDS Inverter +5V/+12V Connector (CN6) ............2-12
2.18 Touch Panel Connector (CN8)................................2-12
2.19 RS-232 Serial Port Connector (CN11)....................2-13
2.20 RS-232/422/485 Serial Port Connector (CN12)......2-13
2.21 Fan Connector (CN17)............................................2-14
2.22 RS-232 Serial Port Connector (CN18)....................2-14
2.23 PS2 Keyboard/Mouse Connector (CN19)...............2-14
2.24 RS-232 Serial Port Connector (CN20)....................2-14
2.25 CPLD Programming Connector (CN21)..................2-15
2.26 12V Power Jack Connector (CN27)........................2-15
2.27 Output +5V_DUAL / PSON# /SM Bus Connector (CN28)
.........................................................................................2-15
2.28 Front Panel Connector (CN29) ...............................2-16
2.29 USB Connector (CN30)...........................................2-16
2.30 Digital I/O Connector (CN31)..................................2-16
2.31 5V Power Jack Connector (CN32)..........................2-17
2.32 USB Connector (CN34)...........................................2-17
2.33 Output Power Connector (CN36)............................2-18
2.34 Audio 2.1 Channel Connector (CN37)....................2-18
2.35 LPC Connector (CN39)...........................................2-18
2.36 VGA Display Connector (CN40)..............................2-19
2.37 +5VSB External Input Connector (CN41) ...............2-19
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
All manuals and user guides at all-guides.com
all-guides.com

SubCompact Board GENE-U15B
vi
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Programming .........................................................A-2
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 Memory Address Map............................................B-3
B.3 IRQ Mapping Chart................................................B-4
B.4 DMA Channel Assignments...................................B-4
Appendix C Mating Connector
C.1 List of Mating Connectors and Cables.................. C-2
Appendix D DIO
D.1 DIO........................................................................ D-2
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
Chapter 1 General Information 1- 1
General
Chapter
1
Information
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
1.1 Introduction
AAEON, a leading embedded boards manufacturer, is pleased to
announce the debut of their new generation 3.5” SubCompact
Board—GENE-U15B. The GENE-U15B is a cutting-edge product that
provides high performance and low power consumption in the
embedded market.
GENE-U15B adopts the latest Intel®Atom Z530P/Z510P processor
and the system memory deploys with SODIMM DDR2 400/533 up to
2GB. In addition, Intel®82574L supports one 10/100/100Base-TX
that allows faster network connections. This model applies one Mini
Card and onboard 4/5/8-wire resistive touch screen controller.
Moreover, one SATA 3.0Gb/s and onboard SSD up 4GB are
configured on the GENE-U15B. GENE-U15B also equips six USB2.0,
four COM, one keyboard and one mouse ports for flexible I/O
expansions.
The display of GENE-U15B supports CRT/LCD simultaneous/ dual
view displays and up to 24-bit single channel LVDS. This brand new
SubCompact board is developed to cater to the requirements of
Automation, Medical, ticket machine, transportation, gaming, KIOSK,
and POS/POI applications.
Chapter 1 General Information 1- 2
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
1.2 Features
zIntel®Atom™ Z530P/Z510P Processor
zIntel®System Controller Hub US15WP
zDDR2 400/533 SODIMM, Max. 2 GB
zGigabit Ethernet x 1
zCRT, 24-Bit Single Channel LVDS LCD
z2CH HD Audio
zSATA 3.0Gb/s x 1, Onboard SSD Up To 4GB
zUSB2.0 x 6, COM x 4, 8-Bit Digital I/O
zOnboard 4/5/8-wire Resistive Touch Screen Controller
zMini Card x 1
z+12V or +5V (Optional) Only Operation
Chapter 1 General Information 1 - 3
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
1.3 Specifications
System
zForm Factor 3.5”
zProcessor Intel®Atom™Z530P 1.6 GHz, Z510P
1.1 GHz
zSystem Memory 200-pin DDR2 SODIMM x 1, Max.
2GB (DDR2 400/533)
zChipset Intel®System Controller Hub US15WP
zI/O Chipset SMSC SCH3114-NU
zEthernet Intel®82574L, 10/100/1000Base-TX,
RJ-45 x 1
zBIOS Award Plug & Play PLCC Type – 1 MB
ROM
zWake On LAN Yes
zWatchdog Timer Generates a time-out system reset
zH/W Monitor
Chipset
Supports power supply voltages and
temperature monitoring
zExpansion Interface Mini Card x 1, LPC Bus
zBattery Lithium battery
zPower Requirement +12V or +5V (optional), AT/ATX
zBoard Size 5.75”(L) x 4”(W) (146mm x 101.6mm)
zGross Weight 0.88 lb (0.4 kg)
zOperating 32˚F~ 140˚F (0˚C ~ 60˚C)
Chapter 1 General Information 1- 4
All manuals and user guides at all-guides.com
all-guides.com

SubCompact Board GENE-U15B
Temperature
zStorage
Temperature
-40˚F~ 176˚F (-40˚C ~ 80˚C)
zOperating Humidity 0%~90% relative humidity,
non-condensing
zMTBF (Hours) 700,000
Display: Supports CRT/LCD simultaneous/dual view displays
zChipset Intel®Z5x0P integrated
zMemory Shared system memory up to 256
MB
zResolution Up to 1280x1024 for VGA;
Up to 1366x768 for LCD
zLCD Interface Up to 24-bit single channel LVDS
I/O
zStorage SATA 3.0Gb/s x 1,
Onboard SST SSD up to 4GB
zSerial Port RS-232 x 3, RS-232/422/485
(auto flow) x 1
zUSB Port USB2.0 x 6
zPS/2 Port Keyboard x 1, Mouse x 1
zDigital I/O Supports 8-bit (Programmable)
zAudio Line-in, Line-out, Mic-in
Chapter 1 General Information 1 - 5
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
Chapter2QuickInstallationGuide2-1
Quick
Installation
Chapter
2
Guide
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
Chapter2QuickInstallationGuide2-3
2.2 Location of Connectors and Jumpers
Component Side
JP8
CN27
CN17
CN11
CN7
CN34
CN22
CN35
JP7
CN19
CN39
JP1
CN40
JP9
CN30
CN31
CN32
CN41
CN28
CN6
CN36
JP2
JP3
JP4
JP5
CN8 CN21 CN29 CN37 CN23
BAT1
CN5
CN2
CN20
CN18
CN12
JP6
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
Chapter 2 Quick Installation Guide 2-4
Solder Side
CN38
CN13
All manuals and user guides at all-guides.com
all-guides.com

SubCompact Board GENE-U15B
Chapter2QuickInstallationGuide2-5
2.3 Mechanical Drawing
Component Side
(12.55)
(12.55)
(13.35)
(17.30)
(1.60)
0.00 6.44 3.17
11.55
26.19 29.81
49.50
60.17 74.62 81.57 99.74 98.37 97.94
101.60
0.00
1.54
8.89
13.70
23.22
41.03
37.26
59.26
84.24
120.96
138.16
146.05
142.75
14.60
143.62
20.39
30.42
41.41
61.93
74.97
82.06
86.32
88.98
91.64
98.37
101.60
146.05
142.82
140.78 144.19 144.34 144.05 142.53 142.45
37.18
57.88
133.56
137.01
123.40
109.78
27.89
20.70
13.34
8.89
4.51
1.21 3.17
1.25 9.19
19.94
21.26
1.76
21.26
41.13
57.44
37.18
24.01
98.12
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
Chapter 2 Quick Installation Guide 2-6
Solder Side
0.00
0.00
36.30
8.13
98.37
101.60
33.93
49.15
142.82
146.05
101.60
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
Chapter2QuickInstallationGuide2-7
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Label Function
JP1 LVDS-Inverter Voltage Control Selection
JP2 LVDS-LCD +5V/+3.3V Selection
JP3 LVDS-Inverter +5V/+12V Selection
JP4 COM2 +5V/+12V/Ring Selection
JP5 Touch Panel 4/5/8-Wire Selection
JP6 CPLD Reset Selection
JP7 Auto Power Button / Front Panel Button Selection
JP8 Clear CMOS
JP9 CRT Always On Disable/Enable
2.5 List of Connectors
The board has a number of connectors that allow you to configure
your system to suit your application. The table below shows the
function of each board's connectors:
Label Function
CN2 DDR2 SODIMM Connector
CN5 LVDS Panel Connector
CN6 LVDS-Inverter +5V/+12V Connector
CN7 LAN Connector
CN8 Touch Panel Connector
CN11 (COM1) RS-232 Serial Port Connector
CN12 (COM2) RS-232/422/485 Serial Port Connector
CN13 Mini Card Slot
All manuals and user guides at all-guides.com

SubCompact Board GENE-U15B
Chapter 2 Quick Installation Guide 2-8
CN17 Fan Connector
CN18(COM3) RS-232 Serial Port Connector
CN19 Keyboard/Mouse Connector
CN20(COM4) RS-232 Serial Port Connector
CN21 CPLD Programming Connector
CN22 USB Connector
CN23 Serial-ATA Connector
CN27 12V input Power Jack Connector
CN28 Output +5V_DUAL / PSON# /SM Bus Connector
CN29 Front Panel Connector
CN30 USB Connector
CN31 Digital I/O Connector
CN32 5V input Power Jack Connector
CN34 USB Connector
CN35 USB Connector
CN36 Output Power Connector
CN37 Audio 2.1 Channel Connector
CN38 Sim Card Reader Connector
CN39 LPC Connector
CN40 VGA Connector
CN41
(Optional) +5VSB External Input Connector
BAT1 Battery Connector
Note: USB 0-5 support USB1.1 and USB2.0, but USB 6-7 only support
USB2.0 only. CN35 is USB6-7 and supports USB2.0 only.
All manuals and user guides at all-guides.com