Aaeon HSB-660S/I User manual

HSB-660S/I
Socket 370 based PentiumIII /
Celeron/ VIA C3Processor
Half-Size CPU Card
With LCD, LAN, USB &PC/104
HSB-660S/I Rev. A Manual
September 2003

Half-Size CPU Card HSB-660S/I
i
Copyright Notice
This document is copyrighted, 2003. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material inthis document is for product information only and
is subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Half-Size CPU Card HSB-660S/I
ii
Acknowledgments
lAward is a trademark of Award Software International, Inc.
lIntel® ,Pentium® III, and Celeron® are trademarks of Intel®
Corporation.
lMicrosoft Windows®is a registered trademark of Microsoft Corp.
lIBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
All other products’name or trademarks are properties of their respective
owners.

Half-Size CPU Card HSB-660S/I
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
•1 HSB-660S or HSB-660I Half-Size CPU Card
•1 Quick Installation Guide
•1 CD-ROM for manual (in PDF format) anddrivers
•1Jumper Cap
•1 HDD Cable
•1 FDD Cable
•1 Audio and COM Port Cable with bracket
•1 LPT and COM Port Cable with bracket
•1 Y-Cable (Keyboard and Mouse)
•1 USB Cable with bracket
If any of these items should be missing or damaged, please contact your
distributor or sales representative immediately.

Half-Size CPU Card HSB-660S/I
iv
Contents
Chapter 1 General Information
1.1Introduction ............................................................................1-2
1.2Features...................................................................................1-3
1.3Specifications...........................................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions...................................................................2-2
2.2 Location of Connectors & Jumpers........................................2-3
2.3Mechanical Drawing................................................................2-5
2.4List of Jumpers........................................................................2-7
2.5List of Connectors...................................................................2-8
2.6 Setting Jumpers .......................................................................2-9
2.7COM2 RS-232/422/485 Selection -1 (JP1)...........................2-10
2.8LCD Clock & Voltage Selection (JP2)....................................2-10
2.9COM2 RS-232/422/485 Selection 2 (JP3).............................2-10
2.10 COM2 RI/+5V/+12V Selection (JP4).................................2-11
2.11 Clear CMOS (JP5).................................................................2-11
2.12 Front Panel (JP6)...................................................................2-11
2.13 Audio Input/Output Connector (CN1)...............................2-12
2.14 AT Power Connector (CN2).................................................2-12
2.15 Parallel Port 1 Connector (CN3)...........................................2-13
2.16 Primary IDE Hard Drive Connector (CN4).........................2-13
2.17 Floppy Drive (CN5)..............................................................2-15

Half-Size CPU Card HSB-660S/I
v
2.18 USB 1.1 Port 2 Connector (CN6 & CN7)............................2-17
2.19 ATX Power Connector (CN8)..............................................2-18
2.20 Serial Port COM 2 (CN9) .....................................................2-18
2.21 Flat Panel Connector for full 36-bit Connector (CN10)......2-19
2.22 CRT Display Connector (CN11)..........................................2-20
2.23 Serial Port COM1 (CN12).....................................................2-20
2.24 Flat Panel Connector (CN13)...............................................2-21
2.25 1st Ethernet 10/100Base-T RJ-45 Connector (CN14)..........2-22
2.26 2nd Ethernet 10/100/1000Base-Tx RJ-45 Connector (CN15)
.......................................................................................................2-23
2.27 IrDA Connector (CN16).......................................................2-24
2.28 PC/104 Socket (CN17).........................................................2-24
2.29 Internal Mouse Connector (CN18).......................................2-25
2.30 CPU Fan Connector (CN19)................................................2-25
2.31 External 5VSB/PWRGD Connector (CN20)......................2-25
2.32 Internal Keyboard Connector (CN21)..................................2-26
2.33 PS/2 Keyboard & Mouse Mini-Din (CN22)........................2-26
2.34 CompactFlashDisk Connector (CFD1)...........................2-26
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization.................................................3-2
3.2 Award BIOS CMOS Setup .....................................................3-3
3.3Main Setup...............................................................................3-6
3.4Advanced Features Setup........................................................3-7
3.5Default Setup...........................................................................3-12
3.6Security Setup..........................................................................3-13

Half-Size CPU Card HSB-660S/I
vi
3.7PC Health Setup......................................................................3-14
3.8Clk/Voltage Setup...................................................................3-15
3.9Exit Setup................................................................................3-16
Chapter 4 Driver Installation
4.1 Installation 1............................................................................4-3
4.2 Installation 2............................................................................4-4

Half-Size CPU Card HSB-660S/I
Chapter 1 General Information 1-1
General
Information
Chapter
1

Half-Size CPU Card HSB-660S/I
Chapter 1 General Information 1 -
2
1.1 Introduction
The all-in-one HSB-660S/I single board computer series is
designed for embedded applications where full features and
performance are major concerns. The adoption of the various CPU
options from IntelPentiumIII, Celeron(0.18/0.13 micron
up to 1.4GHz) to VIA C3processors (up to 1.1GHz),
HSB-660S/I series brings with its significant gains in performance.
HSB-660S/I series is powered by the VIA Twister T system
chipset.
An integrated AGP 4X 2D/3D graphics accelerator is also
provided. With Dual channel TTL interface, the HSB-660S/I series
supports TFT-DSTN LCD displays and CRT monitor
simultaneously. It also provides up to 1600x1200 resolution for
CRT and 1024x768 resolution for LCD 18bpp colors with UMA
32MB display memory.
Excellent connectivity is provided by embedded 10/100Mbps or
Gigabit Ethernet connection. One DIMM slot for a total of 512MB
RAM memory ensures that users have more than enough memory
to handle leading applications. Moreover, one CompactFlash
Type II slot is supported as external storage. The HSB-660S/I
series is fully functional, offering comprehensive I/O support,
including 4 USB ports for connecting the latest peripherals. The
HSB-660S/I series is equipped with the range of legacy ports,
including a parallel port, an IrDA port, and an AC-97 SoundBlaster
compatible audio.

Half-Size CPU Card HSB-660S/I
Chapter 1 General Information 1 -
3
1.2Features
•Supports VIA C3up to 1.1GHz & IntelCPU up to 1.4GHz
(66/100/133MHz FSB)
•Integrated AGP 4X 2D/3D Graphics Accelerator share memory
up to 32MB
•Supports CRT and 36-bit TTL TFT panels
•Integrated AC-97 2.1 / SoundBlaster–compatible legacy audio
•Supports CompactFlashType II Storage
•Supports Dual 10/100Base-T Fast Ethernet or One
10/100Base-T and 10/100/1000Base-Tx Gigabit Ethernet
(Single LAN option provided)
•Inteland RealtekLAN chipset solution
•Supports Ultra ATA-100 with data transfer rate up to 100
MB/Sec
•2COMs / 1 Parallel / 4 USB / 1 IrDA Port
•PCISA or ISA interface and PC/104 slot

Half-Size CPU Card HSB-660S/I
Chapter 1 General Information 1 -
4
1.3 Specifications
System
lCPU: Socket 370, support VIA C3 up to
1.1GHz & Intel Tualatin / Pentium
III / Celeron 66/100/133MHz FSB,
supports up to 1.4GHz
lMemory:168pin 3.3V SDRAM DIMM Socket
x 1, total up to 512MB PC133
lChipset: VIA VT8606 and VIA VT82C686B
lI/O Chipset: VIA VT82C686B
lBIOS: Award Plug & Play ISA BIOS –
512KB
lEthernet: Set One: Realtek RTL8139D and
RTL8100C, 10/100Mbps x 2, use
External RJ-45 Connector
Set Two:Intel i82551ER and
RTL8110S, 10/100Mbps x 1,
10/100/1000Mbps x 1, use External
RJ-45 Connector
lSSD: Supports CF Type II Slot (used
secondary IDE, bootable)
lExpansion Interface: PCISA (HSB-660S) or ISA
(HSB-660I), PC/104 interface

Half-Size CPU Card HSB-660S/I
Chapter 1 General Information 1 -
5
lH/W Status Monitoring: Power supply voltages, fan speed,
monitoring and temperature
monitoring
lBattery: 3V Lithium battery
lPower supply voltage: +5V (4.75V to 5.25V), +12V (11.4V
to 12.6V),-5V (-4.75V to -5.25V),
-12V (-11.4V to–12.6V), ATX/AT
lOperating temperature:32°F to 140°F (0°C to 60°C)
lBoard size: 5.75" (L) x 4" (W)
(146mm x 101.6mm)
lGross Weight: 0.88lb(0.4Kg)
Display
lChipset VIA VT8606
lMemory size: Shared memory up to 32MB
lResolution: Up to 1600x1200@16bpp colors for
CRT
Up to 1024x768@18bpp colors for
LCD
lLCD Interface: Supports 18/36-bit dual channel
TTL TFT Panels
lSupports CRT and LCD simultaneous display

Half-Size CPU Card HSB-660S/I
Chapter 1 General Information 1 -
6
I/O
lMIO: EIDE (UDMA100) x 1, FDD x 1,
RS-232/422/485 x 1, RS-232 x 1,
LPT x 1, K/B+Mouse x 1, Internal
keyboard pin header x 1, Internal
mouse pin header x 1
lIR interface: One IrDA Tx/Rx header
lAudio:Realtek ALC201 AC97
multi-channel codec
lUSB: Two 5x2 pin headers support 4 USB
ports

Half-Size CPU Card HSB-660S/I
Chapter 2 Quick Installation Guide 2 -
1
Quick
Installation
Guide
Chapter
2
Part No. 2007660011 Printed in Taiwan September 2003
Notice:
The Quick Installation Guide is derived from
Chapter 2 of
user manual. For other chapters and
further installation
instructions, please refer to the user manual CD-ROM
that
came with the product.

Half-Size CPU Card HSB-660S/I
Chapter 2 Quick Installation Guide 2 -
2
2.1 Safety Precautions
Always completely disconnect the power cord from
your board whenever you are working on it. Do not
make connections while the power is on, because a
sudden rush of power can damage sensitive
electronic components.
Always ground yourself to remove any static charge
before touching the board. Modern electronic
devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative
surface or in a static-shielded bag when they are
not in the chassis

Half-Size CPU Card HSB-660S/I
Chapter 2 Quick Installation Guide 2 -
3
2.2Location of Connectors and Jumpers
Locating connectors and jumpers –HSB-660S

Half-Size CPU Card HSB-660S/I
Chapter 2 Quick Installation Guide 2 -
4
Locating connectors and jumpers –HSB-660I

Half-Size CPU Card HSB-660S/I
Chapter 2 Quick Installation Guide 2 -
5
2.3 Mechanical Drawing
Mechanical drawing –HSB-660S

Half-Size CPU Card HSB-660S/I
Chapter 2 Quick Installation Guide 2 -
6
Mechanical drawing –HSB-660I

Half-Size CPU Card HSB-660S/I
Chapter 2 Quick Installation Guide 2 -
7
2.4List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Jumpers
Label Function
JP1 COM2 RS-232/422-485 Mode Selection –1
JP2 LCD Clock & Voltage Selection
JP3 COM2 RS-232/422/485 Mode Selection –2
JP4 COM2 RI/+5V/+12V Selection
JP5 Clear CMOS
JP6 Front Panel