Aaeon PCM-6896 User manual

PCM-6896
Intel 815E compact board with PCI
slot, Audio, LAN, compact flash, 4
COM ports, PC/104 & PC/104 Plus

Copyright Notice
This document is copyrighted, 2001. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties which may result
from its use.
Acknowledgments
VIA is a trademark of VIA Technology, Inc.
AMD is a trademark of Advanced Micro Devices, Inc.
Award is a trademark ofAward Software International, Inc.
Cyrix is a trademark of Cyrix Corporation.
IBM, PC/AT, PS/2 and VGA are trademarks of International
Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows ® is a registered trademark of Microsoft Corp.
SMC is a trademark of Standard Microsystems Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
All other product names or trademarks are properties of their
respective owners.
ManualPCM-6896 5th Edition
PreparedinTaiwan, Jan 2003

Packing List
Before you begin installing your card, please make sure that the
followingmaterials are included:
• 1PCM-6896Intel815E all-in-one CPUCard
• 1 Quick Installation Guide
• 1 Supporting CD-ROM that contains the following:
•User’sManual(this manual inPDFfile)
•VGAdrivers and utilities
•Audio drivers and utilities
•Latest BIOS (as of the CD-ROM was made)
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
FCC STATEMENT
This devise complies with part 15 FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including
interference that may cause undesired operations.
This equipment has been tested and found to comply with the
limits for a class "A" digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.

A Message to the Customer
AAEON Customer Services
Each and every AAEON's product is built to meet your exact needs
and specifications to ensure excellent performance in the harsh and
demanding conditions which is typical of the industrial environments.
Whether the new AAEON equipment is designed for the laboratory or
the factory floor, you can be assured that the product will provide the
reliability and ease of operation for which the name AAEON has
come to be known.
Your satisfaction is our primary concern, and here is a guide of the
services for AAEON's customers. To get the full benefit of our
services, please follow the instructions below carefully.
Technical Support
We hope you can get the outstanding performance from our products.
So if you run into technical difficulties, we are here to help. For the
most frequently asked questions, you can easily find answers in
your product documentation. These answers are normally much
more detailed than the ones we can provide over the phone.
So please consult this manual first. If you still cannot find the
answer, gather all the information or questions that apply to your
problem, and with the product close at hand, call your dealer. Our
dealers are well trained and ready to give you the support you need
to get the most from your AAEON products. In fact, most problems
reported are minor and could be easily solved over the phone.
In addition, professional technical support is available from AAEON's
engineers every business day. We are always ready to give advice
on application requirements or specific information on the installa-
tion and operation of any of our products.

Product Warranty
AAEON warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
two yearsfrom the date of purchase.
This warranty does not apply to any products which have been
repaired or modified by unauthorized personnel, or those products
which have been misused, abused,installed improperly and altered
accidentally. AAEON assumes no liability under the terms of this
warranty as a consequence of such events.
Because of AAEON's high quality-control standards and rigorous
testing, most of our customers never need to use our repair service.
If an AAEON's product is defective, it will be repaired or replaced with
no charge during the warranty period. For out-of-warranty repairs,
you will be billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more
details.
If you think you have received a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU type and speed, AAEON products used, other
hardware and software used, etc.) Note anything abnormal and
list any on-screen messages you get when the problem occurs.
2.Please prepare your manual, product, and other helpful information
before calling your dealer to describe your problem.
3.If your product is diagnosed as defective, please manage to obtain
an RMA (return material authorization) number from your dealer.
This allows us to deal with your return quickly.
4.Carefully pack the defective product, a fully-completed Repair
and Replacement Order Card,and a photocopy proof of pur-
chase date (such as your sales receipt) in a shippable container.
A product returned without the proof of the purchase date is not
eligible for warranty service.
5. Write the RMA number visibly on the outside of the package
and ship it out after paying to your dealerfor it.

Notice
DearCustomer,
Thank you for purchasing the PCM-6896 board. This user's
manual is designed to help you to get the most out of the PCM-
6896, please read it thoroughly before you install and use the
board. The product that you have purchased comes with a two-
year limited warranty, but AAEON will not be responsible for
misuse of the product. Therefore, we recommand you to read
the manual before using the product.
To get the latest version of the user manual, please visit our
Web site at:
http://www.aaeon.com.tw

Contents
CopyrightNotice.....................................................................ii
PackingList.............................................................................iii
FCCSTATEMENT.................................................................iii
A Message to the Customer ................................................iv
ProductWarranty....................................................................v
Notice.....................................................................................vi
Chapter 1: General Information........................1
Introduction.......................................................2
Features............................................................3
Specifications....................................................4
Board Layout....................................................................8
Board Dimensions............................................................9
Chapter 2: Hardware Installation....................11
Safetyprecautions .............................................................. 12
RemovingtheCPU ............................................................. 12
InstallingaCPU ...................................................... ............13
SettingJumpers .................................................................. 14
Installing DRAM (DIMMs) .............................................. 15
Location of Jumpers and Connectors..............16
ListofJumpers ................................................................... 17
ListofConnectors .............................................................. 18
Clear CMOS (JP1)..............................................................19
COM3 & COM4 Selection (JP2 & JP3)..........................20
SpeakerOutandLineOut (JP4) ....................................... 21
FrontPanelConnector(JP5) .............................................. 21

PC/104 Plus Voltage Select (JP6).........................21
COM 2 Setting (JP8 , JP7)......................................22
CPU/SDRAM Setting (JP9)....................................23
DOC Socket..........................................................................24
DOC 2000 Installation......................................................25
DOCMemoryAddress Selection (JP10) .......................... 26
CPUandSystemFanPowerConnector(CN1&CN24)....27
USB Connector (CN5 & CN6)...............................28
IDE Hard Drive Connector (CN7)...............................29
IR Connector (CN10)...............................................31
ATXPowerConnector(CN11) ........................................... 31
DVO Connector (CN12).....................................32
KeyboardandMouseConnector(CN13)................................33
VGA Display Connector (CN14)..............................34
Audio Connector (CN15).........................................35
Parallel Port Connector (CN16)..................................35
100Base-Tx Ethernet Connector (CN17)...............36
COM1/COM2/COM3/COM4Connector(CN18).............37
Floppy Drive Connector (CN19)...............................38
DigitalI/OConnector(CN20)...............................................40
LAN LED signal connector (CN21)....................................41
Audio Out Connector 1 Watt (CN22).......................42
Wake On Lan (CN25 pin1-pin5)....................................42
AT/ATX Power Select (CN25 pin6-pin7).......................42
Compact Flash Connector.............................................43
Chapter 3:BIOS Setup...................................45
General information.......................................................46
Main Menu..........................................................................47
AdvancedSetup....................................................................51
DefaultsSetup........................................................................70

SecuritySetup.......................................................................71
PCHealthSetup......................................................................73
Clk/VoltageSetup..................................................................74
Exit Setup..........................................................................75
Chapter 4: Driver Installation ........................... 77
InstallingChipsetDriverforWin95/98/2000 .................... 79
InstallingATADriverforWin95/98/2000......................... 80
InstallingLANfor Win95/98...... ....................................... 81
InstallingVGAfor Win98....................................................82
InstallingAudioforWindows 95/98.....................................83
InstallingChipsetDriverforWinNT...................................84
InstallingUltraATA StorageDriverforWinNT................85
InstallingVGAforWinNT...................................................86
InstallingAudioforWinNT..................................................87
Installing LAN for WinNT.........................................88
InstallingVGAforWin2000...................................................89
InstallingAudioforWin2000.................................................90
Installing LAN for Win2000.........................................91
Appendix A: WatchDog Timer........................... 93

Chapter 1 General Information 1
1
General
Information
This chapter gives background informa-
tion on the PCM-6896.
Sections include:
• Card specifications
• Card layout and dimensions
CHAPTER