ABB 83342-500 User manual

User manual
83342, IP-Gateway
Please select your language
English
Suomi
Français
Norsk
Polski
Svenska
Italiano
Dansk
Español
Pусский
Português
简体中文
Čeština
Deutsch
Slovenčina
Nederlands

V1.1 │06.07.2016
ABB-Welcome
Pos: 2/ #Neustruktur#/Onlin e-Dokumentatio n(+KN X)/Titelblätter/Türkommunikation/Busch- Welcome II/Titelblatt - 83341 - ABB @ 36\mod _1370935982690_1 5.docx @ 296874@ @ 1
IP-Gateway
83342-500
=== Ende der List ef ür Textmar keCo ver ===

Operating Instructions
ABB-Welcome
—2 —
Pos: 4/ #Neustruktur#/Onlin e-Dokumentatio n(+KN X)/Inhalts verzeichnis (--> Füralle Do kumente <--)/Inhalts verzeichnis @ 19\mod_1320 649044386_15.docx @ 1096 53@ @ 1
1Information about the IP-Gateway ...........................................................................................................................3
1.1 General information.................................................................................................................................3
1.2 Structure of the manual...........................................................................................................................3
1.3 Symbols in the manual............................................................................................................................4
2Safety.......................................................................................................................................................................5
2.1 Intended use...........................................................................................................................................5
2.2 Improper use...........................................................................................................................................5
2.3 Target groups and qualifications.............................................................................................................5
2.4 Liability and warranty ..............................................................................................................................5
3Environment.............................................................................................................................................................6
4Integrating mobile end devices with ABB-Welcome IP-Gateway.............................................................................6
4.1 System requirements..............................................................................................................................6
4.2 IP-Gateway start-up................................................................................................................................7
4.2.1 Option 1: Commissioning with the Windows UPnP service.....................................................................8
4.2.2 Option 2: Entering the IP address directly.............................................................................................10
4.3 Setup of the mobile devices with IP-Gateway.......................................................................................12
4.3.1 Step 1: Registering and logging into myABB-LivingSpace portal..........................................................12
4.3.2 Step 2: Connecting the IP-Gateway at www.my-abb-livingspace.com..................................................12
4.3.3 Step 3: Installing the "Welcome" App.................................................................................................... 13
4.3.4 Step 4: Coupling the IP-Gateway and "Welcome" App.........................................................................13
5General function of home page.............................................................................................................................. 15
5.1 General buttons in the configuration .....................................................................................................15
5.2 Login.....................................................................................................................................................15
5.2.1 RESET..................................................................................................................................................16
6Configuration for IP-Gateway.................................................................................................................................17
6.1 Network information..............................................................................................................................17
6.2 "Network configuration" page................................................................................................................18
6.3 "Basic settings" configuration page.......................................................................................................19
6.4 "Change password" configuration page................................................................................................20
6.5 "Device settings" configuration page.....................................................................................................21
6.5.1 Add device............................................................................................................................................ 21
6.6 "Portal Login" configuration page..........................................................................................................23
6.7 "APP Management" configuration page................................................................................................24
6.8 "Associated ComfortTouch 2.x" configuration page ..............................................................................26
6.9 "Associated ComfortTouch 3.x" configuration page ..............................................................................27
6.9.1 "Add user" configuration page...............................................................................................................28
6.10 "Import/Export configuration file" configuration page.............................................................................30
6.11 "Firmware Update" configuration page..................................................................................................31
6.12 "NTP settings" configuration page.........................................................................................................32
6.13 "Version Information" configuration page..............................................................................................33
7Configuration for Telephone Gateway ...................................................................................................................34
8Integrating mobile end devices with the Welcome App..........................................................................................38
8.1 Android version 4.0 or higher................................................................................................................38
8.2 iOS version 4 or higher .........................................................................................................................39
9Network security ....................................................................................................................................................40
10 Integrating a Busch-ComfortTouch®3.0 or higher ................................................................................................41
11 Technical data........................................................................................................................................................42
11.1 Overview table ......................................................................................................................................42
11.2 Device connection / circuit diagram.......................................................................................................43
11.3 Dimensions / dimensional drawing........................................................................................................44
12 Product overview ...................................................................................................................................................44
12.1 Device setup.........................................................................................................................................44
13 Installation and electrical connection .....................................................................................................................45
13.1 Requirements for the electrician ...........................................................................................................45
13.2 Mounting...............................................................................................................................................45
=== Ende der Liste fürT extmarke TOC ===

Operating Instructions
ABB-Welcome
—3 —
Pos: 6.1/ #Neustruktur #/Online-Dokumenta tion(+ KNX)/Überschrift en(--> F ür alle Doku mente< --)/1. Ebene/G - L/Hinweise zum IP- Gateway @ 35\mod_1363 611958376_15.doc x@ 28830 1@ 11 11@ 1
1 Information about the IP-Gateway
Pos: 6.2.1 /#Neustru ktur#/Online-Doku mentation (+KNX)/Ü berschriften (--> Für alleD okumente <--)/2 . Ebene/A - F/Allgemein eHi nweise @ 30\m od_1348481024126 _15.docx @ 238505 @ 2 @ 1
1.1 General information
Pos: 6.2.2 /#Neus truktur#/Online-D okumentatio n(+KN X)/Hinweis ez um KNX Tech nischen Handbuch (--> F üralle D okumente --<)/Allge meineHi nweise/Allgemei neHin weise -K NXT echnisches Handbuch @ 30\ mod_13484791930 40_15.docx @ 238433 @ 1111 @ 1
Please read through this manual carefully and adhere to the information listed. This will ensure reliable operation
and long service life of your product.
For reasons of clarity, this manual does not contain all the detailed information on all the models of the products,
nor can it take into consideration all conceivable circumstances related to installation, operation and maintenance.
If additional information is required or problems arise that are not covered in this manual, the necessary
information can be requested from the manufacturer.
The product has been constructed according to the latest valid regulations governing technology and is
operationally reliable. It has been tested and left the factory in a technically safe and reliable state. To maintain
this state for the period of its operation, the specifications of this manual must be observed and adhered to.
Modifications and repairs to the product must only be undertaken if the manual expressly permits this.
It is only the adherence to the safety instructions and all safety and warning symbols in this manual that will
ensure the optimum protection of the user and the environment as well as the safe and trouble-free operation of
the product.
Pos: 6.3.1 /#Neustru ktur#/Online-Doku mentation (+KNX)/Ü berschriften (--> Für alleD okumente <--)/2 . Ebene/A- F/A ufbau desH andbuches @ 24\ mod_1338552603038 _15.docx @ 215245 @ 222 @ 1
1.2 Structure of the manual
Pos: 6.3.2 /#Neustru ktur#/Online-Doku mentation (+KNX)/Hi nweise zum KNX Tec hnischen Handbuch/ Türkom munikation/Busch-W elcome II/Aufbau des Ha ndbuches - 83341 @ 35\ mod_136361198 4396_15.doc x@ 28 8342@ @ 1
(
•This manual provides you with the detailed technical information about the device, its installation and
configuration. The use of the device is explained by means of examples.
•The chapters "Information on the manual," "Safety," "Environmental information" and "Product overview"
contain general specifications and basic information as well as a description of functions.
•Chapters "Technical data" and "Installation and electrical connection" describe the device technology and
installation, mounting and the electrical connections.
•Chapters "Integrating" and "Configuration" contain instructions on commissioning and setting up or integrating
the device.
•Chapter "Maintenance" contains information about cleaning, fault condition diagnostics and repairing the
device.
Pos: 6.4 / #Neustruktur #/Online-Do kumenta tion (+KN X)/Steuerm odule - Onli ne-Doku mentation ( --> Füralle D okumente <--)/++++ ++++++++ Seitenumbr uch++ +++++++++ +@ 9\mod_ 1268898668093_0.doc x@ 5214 9@ 1 @ 1

Operating Instructions
ABB-Welcome
—4 —
Pos: 6.5.1 /#Neustru ktur#/Online-Doku mentation (+KNX)/Ü berschriften (--> Für alleD okumente <--)/2 . Ebene/S- T/S ymbole desH andbuches @ 30\ mod_1348481258296 _15.docx @ 238518 @ 1111 @ 1
1.3 Symbols in the manual
Pos: 6.5.2 /#Neus truktur#/Online-D okumentatio n(+KN X)/Hinweis ez um KNX Tech nischen Handbuch (--> F üralle D okumente --<)/Symbol e des Han dbuches (Vollst ändig- KNX THB)/ Symbole des Ha ndbuches (V ollständig - KNX TH B) @ 30\ mod_134848 0199844_15.d ocx @ 2 38490 @ 1 @ 1
Danger - danger to life
This symbol in connection with the signal word "Danger" indicates dangerous situations which
could lead to immediate death or serious injury.
Warning - danger to life
This symbol in connection with the signal word "Warning" indicates a dangerous situation which
could lead to immediate death or serious injury.
Caution - risk of injury
This symbol in connection with the signal word "Caution" indicates a possibly dangerous situation
which could lead to slight or moderately serious injury.
Attention - damage to property
This symbol indicates a possibly harmful situation. Non-observance of the safety instructions can
lead to damage or destruction of the product.
Note ...
This symbol indicates information or references to additional useful topics. This is not a signal word
for a dangerous situation.
This symbol refers to integrated videos with additional information on the respective chapter.
This symbol indicates information on the protection of the environment.
Examples of Application, installation and programming are displayed with a gray background.
Pos: 7 /#N eustruktur #/Online-Do kumentatio n (+KNX)/ Steuer module - Onli ne-Doku mentation (--> F ür alle Doku mente< --)/+++++++ +++++ Seitenumbruch ++++++ ++++++ @ 9\mod_12688986 68093_0.docx @ 52149 @ 1 @ 1

Operating Instructions
ABB-Welcome
—5 —
Pos: 8.1/ #Neustruktur #/Online-Dokumenta tion(+ KNX)/Überschrift en(--> F ür alle Doku mente< --)/1. Ebene/S - T/Sicherh eit@ 18\ mod_1302612791 790_15.docx @ 103357 @ 22122 @ 1
2 Safety
Pos: 8.2 /#Neustruktur #/Online-Doku mentation (+KNX)/ Sicherheitshinweis e undHi nweise (--> Fürall e Dokument e<--) /Warnhinweise/Sich erheit- 230 V @ 18\mod_13 02606816750 _15.docx @ 103308 @ 1 @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
–Work on the 100-240 V supply system may only be performed by authorized electricians!
–Disconnect the mains power supply prior to installation and/or disassembly!
Pos: 8.3 /#Neustruktur #/Online-Doku mentation (+KNX)/ Sicherheitshinweis e undHi nweise (--> Fürall e Dokument e<--) /Hinweise - Sachsc häden/Achtung - B eschädigungd urch äußere Einwirkungen @ 2 6\mod_1343995 985123_15.doc x@ 226 743 @ 222222 @ 1
Caution
Risk of damaging the device due to external factors!
Moisture and contamination can damage the device.
That is why the device must be protected against humidity, dirt and damage during transport,
storage and operation!
Pos: 8.4.1 /#Neustru ktur#/Online-Doku mentation (+KNX)/Ü berschriften (--> Für alleD okumente <--)/2 . Ebene/A- F/B estimmungsge mäßerGe brauch@ 2 5\mod_134069 1838858_15.docx @ 2200 36@ 222 222@ 1
2.1 Intended use
Pos: 8.4.2 /#Neustruktur #/Online-Dokumenta tion(+ KNX)/Sicherheit/M usterdokument/Besti mmungsgemäßerG ebrauch/Bestimmungsg emäßer Gebrauch - 83341 @ 35\mod _1363612058226_1 5.docx@ 2 88438 @ 22 @ 1
The device must only be operated within the specified technical data!
The device is used for door communication and video transmission.
To set up the device requires an external device (laptop).
Pos: 8.5.1 /#Neustru ktur#/Online-Doku mentation (+KNX)/Ü berschriften (--> Für alleD okumente <--)/2 . Ebene/A- F/B estimmungswidrig erG ebrauch @ 30\mod_134 8482382253_15.doc x@ 238 583@ 111 11111 @ 1
2.2 Improper use
Pos: 8.5.2 /#Neustru ktur#/Online-Doku mentation (+KNX)/Sic herheit/Musterd okument/Besti mmungswidriger Gebr auch/Bestimm ungswidriger Gebrauch - 8 3341 @ 35\mod_1 363612092911_15.doc x@ 2 88470 @ 1222333 @ 1
The device is dangerious if used improperly. Any non-intended use is deemed improper use. The manufacturer is
not liable for damages resulting from such improper use. The associated risk is borne by the user/operator.
Pos: 8.6.1 /#Neustru ktur#/Online-Doku mentation (+KNX)/Ü berschriften (--> Für alleD okumente <--)/2 . Ebene/U -Z/Zi elgruppen und Qualifi kationen @ 30\mod_1348478 339232_15.docx @ 23833 5@ 223 @ 1
2.3 Target groups and qualifications
Pos: 8.6.2 / #Neustru ktur#/Online-Do kumenta tion (+KN X)/Sicherheit ( --> Fürall e Dokument e<--) /Zielgruppen und Qualifi kationen/Zielgrup pen und Aulifikation en@ 3 0\mod_13484 78121448_15.doc x@ 238 322 @ 3211113331 @ 1
Installation, commissioning and maintenance of the product must only be carried out by trained and properly
qualified electrical installers. The electrical installers must have read and understood the manual and follow the
instructions provided. The operator must adhere to the valid national regulations in his country governing the
installation, functional test, repair and maintenance of electrical products.
Pos: 8.7.1 /#Neustru ktur#/Online-Doku mentation (+KNX)/Ü berschriften (--> Für alleD okumente <--)/2 . Ebene/G- L/H aftung und Gewährleistung @ 30\mod_1348 478525228_15.docx @ 23 8363@ 3 311111333 @ 1
2.4 Liability and warranty
Pos: 8.7.2 / #Neustru ktur#/Online-Do kumenta tion (+KN X)/Sicherheit ( --> Fürall e Dokument e<--) /Haftung und Gewährleistung/Haf tungu nd Gewährleistung - KNX ... @ 30\m od_134847841 9853_15.docx @ 2383 49@ 2 222233111323 @ 1
Improper use, non-observance of this manual, the use of inadequately qualified personnel, as well as
unauthorized modification excludes the liability of the manufacturer for the damages caused. It voids the warranty
of the manufacturer.
Pos: 9 /#N eustruktur #/Online-Do kumentatio n (+KNX)/ Steuer module - Onli ne-Doku mentation (--> F ür alle Doku mente< --)/+++++++ +++++ Seitenumbruch ++++++ ++++++ @ 9\mod_12688986 68093_0.docx @ 52149 @ 31113 @ 1

Operating Instructions
ABB-Welcome
—6 —
Pos: 10.1 /#Neustru ktur#/Modul-Stru ktur/Online-Doku mentation/Übersc hriften (--> Füralle Do kumente <--)/1. Ebene/U - Z/Umw elt@ 18 \mod_130261415896 7_15.docx @ 103383 @ 333333 @ 1
3 Environment
Pos: 10.2 /#Neustru ktur#/Online-Do kumentation (+KN X)/Sicherheitshinw eiseu nd Hinweise (--> Für alle Dokumen te<--)/Hin weise/Hinweis - Um welt- Hinweis Ele ktrogeräte@ 18\ mod_130276397343 4_15.docx @ 103500 @ 3333333333 333 @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household waste.
–The device contains valuable raw materials that can be recycled. Therefore, dispose of the
device at the Appropriate recycling facility.
Pos: 10.3 /#Neustru ktur#/Online-Do kumentation (+KN X)/Sicherheitshinw eiseu nd Hinweise (--> Für alle Dokumen te<--)/Hin weise/Hinweis - Um welt- Entsorgu ngEl ektrogeräte@ 2 0\mod_13257606 95972_15.docx @ 136583 @ 33333333 33@ 1
All packaging materials and devices bear the markings and test seals for proper disposal. Always dispose of the
packaging material and electric devices and their components via an authorized recycling facilities or disposal
companies.
The products meet the legal requirements, in particular the laws governing electronic and electrical devices and
the REACH ordinance.
(EU Directive 2002/96/EC WEEE and 2002/95/EC RoHS)
(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006)
4 Integrating mobile end devices with ABB-Welcome IP-Gateway
4.1 System requirements
Note
Please note that the IP-Gateway must be connected to the router by a LAN cable.
The following system requirements are necessary for smooth operation of the IP-Gateway:
Components for the IP-Gateway
The following components are required to operate the IP-Gateway:
- A Welcome door entry system including at least one outdoor station and one system controller
- IP network (should connect mobile devices, must have a WLAN connection)
- An outdoor station with camera must be integrated for video transmission
As tenants
As tenants, the following come into question for operation with the IP-Gateway:
- Tablet PC or similar device with an iOS or Android operating system for the installation of the App with an
Internet connection via 3G/UMTS or WLAN. The data rate (e.g. a flat rate) must allow for Voice-over-IP
("VoIP") connections.
- Laptop, tablet PC or similar device with an Internet browser for access to myABB-LivingSpace portal at address
https://my.abb-livingspace.com/en/user/login/ and for the configuration of the IP-Gateway in the home network
Mobile App
If you want to use the Welcome mobile App from the Internet, the following requirements must also be met:
- DSL-6000 Internet connection or faster
- Minimum 3G (UMTS) mobile Internet
Note
An Internet connection slower than ADSL 6.000 or 3G/UMTS impairs the quality of video
streaming from the IP-Gateway to the Apps.

Operating Instructions
ABB-Welcome
—7 —
4.2 IP-Gateway start-up
The IP-Gateway has a user interface that can be reached via an Internet browser. The user interface can be
opened from every computer that is part of the same network as the gateway that is to be configured.
For the initial startup of the IP-Gateway, a few basic settings need to be made in this user interface.
Two options are available to you for commissioning:
Commissioning
Description
Option 1 - UPnP
Commissioning with the Windows UPnP service (Windows Vista or higher)
Option 2 - IP address
Enter IP address directly
Information regarding documentation
The Windows 7 interface is used to describe the configuration options.

Operating Instructions
ABB-Welcome
—8 —
Pos: 18 /
4.2.1 Option 1: Commissioning with the Windows UPnP service
Preconditions:
–There is a DHCP server on the network, e.g. integrated in the router.
–The IP-Gateway is connected to the router by a LAN cable.
–The PC is connected to the router by a LAN.
–The IP-Gateway is connected and ready for operation.
Fig.
1
: Windows UPnP service
1.Open Windows Explorer.
2.Click the "Network" entry below the displayed drives.
The window pane on the right now displays all devices currently on the network.
3.Double-click the IP-Gateway icon.
A browser window with the configuration interface automatically opens.
Fig.
2

Operating Instructions
ABB-Welcome
—9 —
Note
If the browser does not open automatically, the device properties Appear instead. Copy the
displayed IP address, e.g. 192.168.0.180, and enter it manually into the browser's address bar.
Note
If the IP-Gateway icon can’t be found, you could check the Windows firewall. For example, turn off
the windows firewall. If you still can’t find the IP-Gateway icon, you can go to Option 2.

Operating Instructions
ABB-Welcome
—10 —
4.2.2 Option 2: Entering the IP address directly
Preconditions:
–There is a DHCP server on the network, e.g. integrated in the router.
–The IP-Gateway is connected to the router by a LAN cable.
–The PC is connected to to the router by a LAN.
–The IP-Gateway is connected and ready for operation.
1.Link the external device in a common network to the IP-Gateway.
2. Launch the control panel.
3. Get the DHCP server address according to the following steps.
For example: the DHCP server address is 192.168.1.1.
Fig.
3
: Get DHCP server address
4. Open the user interface of your router.
Enter the DHCP server address directly into the address line of your browser to see a list of all connected
devices including their names and IP addresses. Copy the IP address of the device "IP-Gateway."
1
2
3
4
5
6
7

Operating Instructions
ABB-Welcome
—11 —
Fig.
4
Note
Get the IP address of IP-Gateway directly from the attached devices list, for example, 192.168.1.2.
5. Enter the IP address of the gateway directly into the address line of your browser to call up the user interface
of the gateway.
Enter the default values in the "User name" and "Password" input fields.
(default values):
User name: admin
Password: admin
Click the "Login" button to display the configuration menu.

Operating Instructions
ABB-Welcome
—12 —
4.3 Setup of the mobile devices with IP-Gateway
4.3.1 Step 1: Registering and logging into myABB-LivingSpace portal
ABB portal Login
1. Open page my.abb-livingspace.com and register a new user.
2. Input a username, password and email to receive your active link.
3. Read and accept both of the items.
4. Click the “register” button.
5. Activate your user account via email.
4.3.2 Step 2: Connecting the IP-Gateway at www.my-abb-livingspace.com
In the web interface of the IP-Gateway, in menu Portal Login, enter your data and the name of the IP-
Gateway. Click on the login button to connect the IP-Gateway with the portal.
Web interface IP-Gateway
1
2
4
3

Operating Instructions
ABB-Welcome
—13 —
4.3.3 Step 3: Installing the "Welcome" App
You can download the ABB-Welcome App from Google Play or the Apple App Store by entering keyword "ABB
Welcome".
Welcome APP
4.3.4 Step 4: Coupling the IP-Gateway and "Welcome" App
Smart phone: Open the Welcome APP
User
Password
Friendly Name
Login
abc123
●●●●●●
SM-N9009
1
Welcome
2
3
Integrity token 2071 01A9
IPGateway20140731
E2fff616 - pairble
4
Friendly Name
of IP gateway
Portal Client
UUID
Select the IP gateway to pair
Click the
5
IP-Gateway: "App management" configuration page displays the pairing
request, click the “handle” button.
Version:2.0.0
Network settings
System settings
Ringtone buiding
Ringtone apartment
Reset Application
Quit
Android: select “Network settings”
iOS: select “Manage IPGW”
Friendly Name
of Smart phone

Operating Instructions
ABB-Welcome
—14 —
1. Open the App, and enter the data for access to myABB-LivingSpace portal. Click the Login button to
connect the App with the portal.
2. In the App, select menu Settings and then Manage IP-Gateway or Network settings.
3. Click the IP-Gateway you wish to couple and note the security code (integrity code) displayed.
4. In the web interface of the IP-Gateway, select menu item App management and select your mobile
terminal device via the edit button.
If the desired device is not in the list, update it via the Update button.
5. You can now assign the desired access rights to the App of the respective device.
6. You complete the coupling by entering the security code (integrity code).
After configuring the pemissions, click the “Save” button
6
7
Input the “Integrity code”
displayed on smart phone
See Step 4:
Integrity token 2071 01A9
Paired successfully
Finish the App Management
8
9

Operating Instructions
ABB-Welcome
—15 —
Po
Pos: 28 /#Neustru ktur#/Online-Doku mentation (+KNX)/Üb erschriften (--> Fürall eD okumente <--)/1.Ebene/G- L/Konfiguration@ 35\mod_1363612248673_15.docx@288599@ 322111122223111111111111111111111112111111222222222222222222222222222333333333333333333333333333333333321222222222233333333333333333333333333333333333333333333333333333332111111111111111111111111111111111111211111111111111111111111111111@ 1
5 General function of home page
Pos: 29 /#Neustru ktur#/Online-Doku mentation (+KNX)/B edienung/Türkommunikation/B usch-Welco me/Allgemeine Schaltflöschen der Ko nfigurations Interface - 8 3341 @ 35\mod_136 3612261829_15 .docx @ 288614 @ 111132 2222211122222 222121111111 11111111111111 1111111111111111 133333333333333 333333333 33333333333333 33333333333333 3333333333333 33321222222222 22222222222222 2222333333333333 3333333333333 333333333111 111222222222211 111111111111 11111111111111 1111111333333 333333333333 33222222222222 22222211211112 33333333 @ 1
All configurations are set in the browser interface.
5.1 General buttons in the configuration
"Log off" button
Click the "Log off" button at the top right to leave the configuration interface as a logged-on user.
You can leave the configuration interface at any time.
"Reset" button
If you have entered incorrect data in the input fields, click the "Reset" button to clear all your entries.
All input fields are cleared and you can enter your data again.
"Save" button
Click the "Save" button to save your entries and to continue to the next configuration page.
Switching to a new configuration page
Click the individual configuration pages in the left column of the configurations to switch to the required
configuration page.
Pos: 30 /#Neustru ktur#/Online-Doku mentation (+KNX)/Üb erschriften (--> Fürall eD okumente <--)/2 .Eb ene/G- L/ LOGIN @ 35\mod_1363612 270771_15.docx @ 28863 0@ 1111 11222222222222222 2222222222223333 33333333333333 333333333333333321 22222222223333333 33333333333 3333333333333333 3222222222222222 22222@ 1
5.2 Login
Pos: 31 /#Neustru ktur#/Online-Doku mentation (+KNX)/B edienung/Türkommunikation/B usch-Welco me/MenüLOGIN - 833 41@ 3 6\mod_13709352 37191_15.doc x@ 29 6760 @
11111111111111111111111111111111113333333333333333333333333333333333333333333333333333333333333333333212222222222222222222222222223333333333333333333333333333333333111111222222222211111111111111111111111111111111111333333333333333333332222222222222222221121111233333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222333333333331222222222222233333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333322222222222222222222222222222222222111111111111112222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222211111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111@ 1
3.Tragen
Fig.
5
: Login window
The IP address shows you the IP address currently used by the device.
The MAC address shows you the MAC address currently used by the device.
Language
The default language is English. Select the flag for other language options.
User name
Enter the default values in the "User name" and "Password" input fields.
(default values):
User name: admin
Password: admin
"Login" button
Click the "Login" button to display the configuration menu.
The window with the network information Appears.

Operating Instructions
ABB-Welcome
—16 —
5.2.1 RESET
Note
If you forget your user name and password, you can reset the IP-Gateway back to its factory
settings.
The "Reset" button is located on the front of the IP-Gateway behind a flap.
Performing the reset
1.Press the "Reset" button for at least 3 seconds.
Fig.
6
: Location of the Reset button
Pos: 32 /#Neustru ktur#/Online-Doku mentation (+KNX)/S teuermodule - Online-Do kumentation (--> Für alle Dokumente <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_0.docx@ 52149@ 222222222222113333333322221121222221111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111122222222222222222223333333311211112222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222@ 1

Operating Instructions
ABB-Welcome
—17 —
Pos: 33 /#Neustru ktur#/Online-Doku mentation (+KNX)/Üb erschriften (--> Fürall eD okumente <--)/2 . Ebene/M - O/M enü Netzwerki nformation @ 34\mod_ 13624945543 08_15.doc x @ 284581 @
222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222333333333331222222222222233333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333322222222222222222222222222222222222111111111111112222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222211111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111@1
6 Configuration for IP-Gateway
6.1 Network information
Pos: 34 /#Neustru ktur#/Online-Doku mentation (+KNX)/B edienung/Türkommunikation /Busch-Welco me/MenüNetz werkinformation - 833 41@ 3 6\mod_13709352 57488_15.doc x@ 296 776 @ 23333333333 312222222222223 333333333333 33333333333333 33333333333333 33333333333333 33333333333 3333333333333 33333333333333 33333322222222 22222222222 22222222222222 221111111111111 122222222222 22222222222222 2222222222222222 22222222222222 2222222222222 2 @ 1
The network information Appears after logging in.
Fig.
7
: Network information
The "Network information" page displays the IP-Gateway settings currently used.
IP address
The IP address is the address for accessing the connected IP-Gateway.
You need this address to log into the configuration interface!
Portal client information
Display the connection status between IP-Gateway and server.
Date and time synchronization
Display the status of the date and time synchronization.
Note
Note the displayed IP address to log into the configuration again, e.g. after restarting the system
when creating other user accounts.
Pos: 35 /#Neustru ktur#/Online-Doku mentation (+KNX)/S teuermodule - Online-Do kumentation (--> Für alle Dokumente <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_0.docx@ 52149@ 12233333333333222222222222222222222222222222222222222222222222222222222222222222222222211222121222211222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222@ 1

Operating Instructions
ABB-Welcome
—18 —
Pos: 36 /#Neustru ktur#/Online-Doku mentation (+KNX)/Üb erschriften (--> Fürall eD okumente <--)/2 . Ebene/G - L/Konfigurati onsseite „Netzwer kkonfiguratio n" @ 34\mod_1362494753800_15.docx@284613@ 222222222222222222222222222211111111111111111111111111111111111111111111111111111111111111111111111111111111212221111111@ 1
6.2 "Network configuration" page
Pos: 37 /#Neustru ktur#/Online-Doku mentation (+KNX)/B edienung/Türkommunikation/B usch-Welco me/MenüNetz werkkonfiguration - 83 341 @ 36\mod_1370 935504989_15. docx@ 2 96854 @ 2121111 1233333333311111 11222121111111 1111111111111 11111111133333 33333333333333 33333333333333 333333333333333 333333333333 31111111111 11111111 @ 1
Fig.
8
: "Network configuration" page
You can configure your device as required on the "Network configuration" page.
DHCP
Select "DHCP" for the device to automatically obtain an IP address.
Static IP address
Please note that the IP address of the gateway does not change when a static address is assigned. A static IP
address only needs to be assigned in exceptional cases to manually configure the network. Click the "Static IP
address" check box to enter the following addresses:
IP Address, Network mask, Default Gateway, DNS.
Pos: 39 /#Neustru ktur#/Online-Doku mentation (+KNX)/Üb erschriften (--> Fürall eD okumente <--)/2 .Eb ene/M -O/ Konfigurationsseite "Gru ndeinstellungen" @ 34\mo d_136249492768 9_15.docx @ 284645 @ 111111111111 11111111111111 1111111111111111 111111111111111112 11111111211111111 11111111111 1222222222222222 22222222222222 22222211111111 111111@ 1

Operating Instructions
ABB-Welcome
—19 —
6.3 "Basic settings" configuration page
Pos: 40 /#Neustru ktur#/Online-Doku mentation (+KNX)/B edienung/Türkommunikation/B usch-Welco me/MenüGrund einstellungen - 8334 1@ 3 5\mod_136361 2329100_15.doc x@ 2 88694 @ 23333333333 311112211111 1112111111111111 11111111111111 111111111111111 111111111111 111111111111 1111111111111111 11111111 11111111111111 11111111111111 11111111111232 223322222222222 222 @ 1
Fig.
9
: "Basic settings" configuration page
You can adjust the basic settings for the IP-Gateway on the "Basic settings" configuration page.
Address of the indoor station
The address of the indoor station indicates which call button on the outdoor station is used to control the IP-
Gateway.
Note
Up to 4 terminal devices, including smart phone, Tablet and Busch-ComfortTouch®, can be
connected with one IP-Gateway inside one apartment.
Default outdoor station
The address of the default outdoor station is the station set as the preferred outdoor station. One audio and video
connection also without incoming door call can be set up for this station.
Master/slave mode
When more than one indoor station is installed in the apartment (same address), one station must be configured
as master and others as slave.
Default Light Address
The address of the light indicates the address of switch actuator (M2305)
Note
Switch actuator (M2305) must works on “Time relay mode,” and a light or a lock can be connected
with it. You can control this light or lock by button on the Welcome App interface. (For the
details about the switch actuator, please refer to the M2305 user manual.)
os: 41 /#N eustruktur #/Online-D okumentatio n (+KNX)/ Steuer module - Online-D okument ation (--> Für alle Doku mente< --)/++++++++++++Seitenumbruch++++++++++++@9\mod_1268898668093_0.docx@52149 @22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222121112222222222222121112222222222222222222222232223322222222222222@ 1