ABB ARM600 User manual

—
Quick Start Guide
M2M Gateway ARM600
1
1Ethernet LAN port
1
—
Standard Edition front and back panel
—
Enterprise Edition front and back panel

2QUICK START GUIDE M2M GATEWAY ARM600
—
Getting started
Login to the ARM600 user interface
Connect the power cable into ARM600‘s back panel
(left side).
Connect the Ethernet cable between the ARM600 LAN port
(Gb1 in ARM600 Enterprise Edition and 1 in ARM600 Standard
Edition located on the back panel, right side) and your
computer.
Configure your computer to use the same IP address space as
ARM600. For example, your computer IP could be 10.10.10.11
with netmask 255.255.255.0. Check the connection with the
ping command.
Connect to ARM600 using the web browser to https:...
The default IP address of ARM600 is 10.10.10.10. Remember to
use https and not http and port 10000.
Log in to the device. The username is arctic-adm and the
default password is arcticm2m.
It is highly recommended that the default password
is changed before the product is connected to a public
cellular network.
—
Figure 1. Welcome page in the ARM600 Web HMI

QUICK START GUIDE M2M GATEWAY ARM600 3
Network settings
Navigate to Network → Network Configuration.
Choose Edit interface eth0, edit the configuration
appropriately and click Save.
Restart the interface after saving the configuration.
Complete customer documentation is available in
the product pages that can be accessed through
abb.com/mediumvoltage
—
Figure 2. ARM600 Web HMI

1MRS758864 REV B EN 02-2019
—
We reserve the right to make technical changes or modify the contents
of this document without prior notice. With regard to purchase orders,
the agreed particulars shall prevail. ABB does not accept any responsibility
whatsoever for potential errors or possible lack of information in this
document.
We reserve all rights in this document and in the subject matter and
illustrations contained therein. Any reproduction, disclosure to third
parties or utilization of its
contents – in whole or in parts – is forbidden
without prior written consent of ABB.
Copyright© 2019 ABB. All rights reserved.
—
For more information, please contact
ABB Distribution Solutions
P.O. Box 699
FI-65101 Vaasa, Finland
Phone: + 358 10 22 11
abb.com/mediumvoltage
abb.com/substationautomation