ABB ABB-Welcome M2240-W User manual

2TMD042000D0009 │10.06.2020
Product manual
ABB-Welcome
M2240.-W Video indoor station 4.3, WiFi

Inhaltsverzeichnis
Product manual
2TMD042000D0009
│
2
Inhaltsverzei chnis
1Notes on the instruction manual............................................................................................................4
2Safety..................................................................................................................................................4
3Intended use........................................................................................................................................5
4Environment.........................................................................................................................................7
4.1 ABB devices..............................................................................................................................7
5Product description...............................................................................................................................8
5.1 Control elements........................................................................................................................8
5.2 Terminal description...................................................................................................................9
6Technical data....................................................................................................................................10
7Mounting/Installation...........................................................................................................................11
7.1 Requirement for the electrician.................................................................................................11
7.2 General installation instructions................................................................................................12
7.3 Product dimensions .................................................................................................................12
7.4 Installation height.....................................................................................................................12
7.5 Surface-mounted installation....................................................................................................13
7.6 Dismantling .............................................................................................................................14
8Commissioning...................................................................................................................................15
8.1 Registering an account on the MyBuildings portal.....................................................................15
8.2 Download APP ........................................................................................................................16
8.3 Logging into the APP ...............................................................................................................17
8.4 Initial setup..............................................................................................................................18
8.5 Local settings ..........................................................................................................................25
8.5.1 Ringtone setting................................................................................................................... 25
8.5.2 Volume setting ..................................................................................................................... 26
8.5.3 Brightness setting................................................................................................................. 27
8.5.4 Color setting......................................................................................................................... 28
8.5.5 Contrast setting.................................................................................................................... 29
8.5.6 Language............................................................................................................................. 30
8.5.7 Information........................................................................................................................... 31
8.5.8 Obtaining product manual..................................................................................................... 32
8.5.9 Restoring to default settings.................................................................................................. 33
8.5.10 Resetting the network configuration....................................................................................... 34
8.6 Settings viathe APP................................................................................................................35
8.6.1 Entering the APP settings..................................................................................................... 35
8.6.2 Configuring program buttons................................................................................................. 37
8.6.3 Searching cameras............................................................................................................... 38
8.6.4 Changing the outdoor station password................................................................................. 39
8.6.5 User management................................................................................................................ 40
8.6.6 Device management............................................................................................................. 42
9Operation...........................................................................................................................................43
9.1 Call from outdoor stations ........................................................................................................43

Inhaltsverzeichnis
Product manual
2TMD042000D0009
│
3
9.2 Surveillance from outdoor stations............................................................................................44
9.3 Surveillance from cameras.......................................................................................................46
9.4 Intercom..................................................................................................................................47
9.5 Releasing switch actuators.......................................................................................................48
9.6 Call guard unit.........................................................................................................................49
9.7 SOS........................................................................................................................................50
9.8 History.....................................................................................................................................51
10 Cyber security....................................................................................................................................53
10.1 Disclaimer ...............................................................................................................................53
10.3 Deployment guideline...............................................................................................................55
10.4 Upgrading................................................................................................................................55
10.5 Backup/Restore.......................................................................................................................55
10.6 Malware prevention solution.....................................................................................................55
10.7 Password rule..........................................................................................................................55
Notice ........................................................................................................................................................56

Notes on the instruction manual
Product manual
2TMD042000D0009
│
4
1Notes on the instruction manual
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property, and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place. If you pass the device on, also pass on this manual
along with it. ABB accepts no liability for any failure to observe the instructions in this manual.
2Safety
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!

Intended use
Product manual
2TMD042000D0009
│
5
3Intended use
This device is a central control panel of the ABB-Welcome system and operates exclusively with
components from this system. The device must only be installed in dry indoor rooms.
Note
Only one WiFi indoor station can be used in the same apartment, and this WiFi
indoor station must be set to "Master" mode.

Intended use
Product manual
2TMD042000D0009
│
6
WiFi installation
Note
If the device supports WiFi function, please make sure the device has good WiFi
signal reception before installation. The distance between the router and
monitors, and the construction materials used in the walls are factors that can
affect signal quality.
If the WiFi signal is not strong enough to guarantee correct operation, a WiFi
repeater must be installed between the router and this device in order to boost
the WiFi signal received by this device.

Environment
Product manual
2TMD042000D0009
│
7
4Environment
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household
waste.
– The device contains valuable raw materials that can be recycled. Therefore,
dispose of the device at the appropriate collecting facility.
4.1 ABB devices
All packaging materials and devices from ABB bear the markings and test seals for proper
disposal. Always dispose of the packing materials and electric devices and their components via
an authorized collection facility or disposal company.
ABB products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU-Directive 2012/19/EU WEEE and 2011/65/EU RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description
Product manual
2TMD042000D0009
│
8
5Product description
5.1 Control elements
No. Description
1 4.3" IPS screen
2Communication button
While a call is coming in, pressthis button to activate the communication within 30 s and press
again to end the call.
3Programmable button can be set to release the 2nd lock of the outdoor station, call guard unit,
intercom call and control the switch actuator.
4
Unlock button
■Open the door by pressing this button at any time.
■Auto-unlock: The door is automatically opened after an incoming call (Hold this button for
more than 3 seconds)
5
Mute button
■In standby mode, press this button to mute the ringtone of this indoor station.
■In standby mode, long press this button to mute the ringtone of all indoor stations in the same
apartment.
■While a call is coming in, press this button to reject the call.
■During the conversation, press this button to mute the microphone.
6Surveillance button
In standby mode, press this button to surveil the outdoor station and external cameras if
available.
7Setting button
2
3
1
3
7
6 5
4

Product description
Product manual
2TMD042000D0009
│
9
5.2 Terminal description
No. Description
1Outdoor station selector switch
Set the address of the default outdoor station.
2Indoor station selector switch
Selector switch X10 sets tens digits, selector switch X1 sets units digits, Dip switches X100 and
X200 set hundreds digits.
3Master/slave function switch
Only one indoor station in each apartment can be set as "Master" (ON=Master).
4Terminal resistor switch
In video installations or mixed audio and video installations, the switch must be set as 'RC on' on
the last device of the line (ON=RC on).
5 a, b = bus connector
6 A potential free contact, such as a doorbell pushbutton
7Connector for local power supply
*Only apply to M22403-W
8Setting button
Press to enter setting mode.
9 Microphone
10 Speaker
1
2
234
56 7
10
8
9
2
2
DC+GND

Technical data
Product manual
2TMD042000D0009
│
10
6Technical data
Designation Value
Operating voltage range 20-30 V
⎓
Standby current 24 V
⎓
, 45 mA
Operating current 24 V
⎓
, 330 mA
Operating temperature 5 °C…+45 °C
Single-wire clamps 2 x 0.28 mm2...2 x 0.75 mm2
Fine-wire clamps 2 x 0.28 mm2...2 x 0.75 mm2
Wireless transmission power Max. 20 dBm
Wireless transmission standard IEEE 802.11 b/g/n, 2.4 GHz
IP level IP 30

Mounting/Installation
Product manual
2TMD042000D0009
│
11
7Mounting/Installation
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
7.1 Requirement for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
– Incorrect installation endangers your life and that of the user of the electrical
system.
– Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
– Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
– Use suitable personal protective clothing.
– Use only suitable tools and measuring devices.
– Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).

Mounting/Installation
Product manual
2TMD042000D0009
│
12
7.2 General installation instructions
■Terminate all branches of the wiring system via a connected bus device (e.g., indoor station,
outdoor station, system device).
■Do not install the system controller directly next to the bell transformer and other power
supplies (to avoid interference).
■Do not install the wires of the system bus together with 100-240 V wires.
■Do not use common cables for the connecting wires of the door openers and wires of the
system bus.
■Avoid bridges between different cable types.
■Use only two wires for the system bus in a four-core or multi-core cable.
■When looping, never install the incoming and outgoing bus inside the same cable.
■Never install the internal and external bus inside the same cable.
7.3 Product dimensions
7.4 Installation height
131.4
122.3
18
1.50m(4.9feet)

Mounting/Installation
Product manual
2TMD042000D0009
│
13
7.5 Surface-mounted installation
Surface-mounted box
Surface-mounted installation
79.2
60
60 83.3
83.3 SwissVDE & BS NEMA&Italy NEMA & Italy
120.7
120.7

Mounting/Installation
Product manual
2TMD042000D0009
│
14
7.6 Dismantling

Commissioning
Product manual
2TMD042000D0009
│
15
8Commissioning
8.1 Registering an account on the MyBuildings portal
Access the link: https://mybuildings.abb.com, and click "Register". Fill in the form as required to
register an account. Then activate the user account when you receive the email sent from the
MyBuildings portal.

Commissioning
Product manual
2TMD042000D0009
│
16
8.2 Download APP
Download the APP from Google Play or the Apple Store via the keyword "ABB Welcome". Then
install the relevant APP on a mobile or tablet.
Note
The following snapshots used in this document were taken on the IOS system.

Commissioning
Product manual
2TMD042000D0009
│
17
8.3 Logging into the APP
On the mobile phone/tablet, click to open the app, select "Setup Welcome" and then enter
the user name, password and alias, tick the checkboxes to accept all the terms and conditions,
then click "Log in".
Note
If an incorrect password is entered more than 3 times, no further attempts are
permitted within a certain period of time.

Commissioning
Product manual
2TMD042000D0009
│
18
8.4 Initial setup
1. Select language
In standby status, press the setting button to access the language setting screen if it is being
powered on for the first time.
You can tap the program button and key button to select a language (maximum of 16
languages).

Commissioning
Product manual
2TMD042000D0009
│
19
2. Accept the license

Commissioning
Product manual
2TMD042000D0009
│
20
3. WiFi setting
Note
An account on the MyBuildings portal should be registered first.
Only 2.4G WiFi can be supported by this WiFi indoor station, please set the
router to 2.4G WiFi before initial setup.
On the panel, press the setting button to access the QR code screen.
On the APP "Home" screen, tap "∨", followed by "Pair devices", "WiFi indoor station" to scan
QR code on the WiFi indoor station.