ABB M22301 series User manual

VER:1.1 │ │ 20.10.2015
ABB-Welcome
Pos: 2 /DinA4 - Anleit ungen O nline/Inhalt/KNX/D oorEntry/83220- AP-xxx/Tit elblatt - 83220-AP-xxx - ABB @ 19\mod_13 23249806476_15.doc x@ 11 1084 @ @ 1
M22301-.
M22302-.
M22303-.
4.3" Video handset
indoor station
=== Ende der List ef ürT extmar ke Cover ===

ABB-Welcome
|
—2 —
Pos: 4 /Busch-J aeger (Neustru ktur)/Modul-Str uktur/Online-Doku mentation/Inhal tsverzeichnis (--> Für alle Doku mente< --)/Inhaltsverz eichnis @ 19\mod_1320649 044386_15.docx @ 109653 @ @ 1
1Safety............................................................................................................3
2Intended use..................................................................................................3
3Environment ..................................................................................................3
3.1 ABB devices.................................................................................3
4Operations.....................................................................................................5
4.1 Standard operations .....................................................................5
4.1.1 Control elements ..........................................................................5
4.2 Control actions..............................................................................8
4.2.1 Incoming call/during a call ............................................................8
4.2.2 Display and volume settings during a call...................................10
4.2.3 Communication menu.................................................................11
4.3 Settings.......................................................................................14
4.3.1 Overview.....................................................................................14
4.3.2 Intercom call settings..................................................................15
4.3.3 Switch actuator settings..............................................................17
4.3.4 Program button settings..............................................................18
4.3.5 Call forward settings...................................................................19
4.3.6 Auto unlock settings....................................................................20
4.3.7 Outdoor station password settings .............................................21
4.3.8 Ringtone settings........................................................................22
4.3.9 Volume settings..........................................................................23
4.3.10 Date and time settings................................................................24
4.3.11 Other settings.............................................................................25
4.3.12 Blacklist settings.........................................................................26
4.3.13 History review.............................................................................27
4.3.14 Camera List................................................................................29
4.3.15 Language settings ......................................................................31
4.3.16 Information..................................................................................31
4.3.17 Reset factory default...................................................................32
4.4 Cleaning .....................................................................................33
4.5 Adjusting the device....................................................................34
5Technical data.............................................................................................35
6Mounting/Installation....................................................................................36
6.1 Requirements for the electrician.................................................36
6.2 General installation instructions..................................................37
6.3 Mounting.....................................................................................38

ABB-Welcome
|
—3 —
Pos: 6 /Busch-J aeger (Neustru ktur)/Modul-Str uktur/Online-Doku mentation/Übers chriften (--> Für alle Doku mente <--)/1. Ebene/S - T/Sicherheit @ 18\ mod_13 02612791 790_15.docx @ 103357 @ 1 @ 1
1 Safety
Pos: 7 /Busch-Jaeger( Neustruktur)/M odul-Stru ktur/Onlin e-Dokumenta tion/Sicherheit ( --> Fürall e Doku mente<--) /Warnhinweise/Sich erheit - 230 V @ 18\mod_ 13026068 16750_15.docx @ 103308 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
–Work on the 100-240V supply system may only be performed by
authorized electricians!
–Disconnect the mains power supply prior to installation and/or
disassembly!
Pos: 8 /Busch-J aeger (Neustru ktur)/Modul-Str uktur/Online-Doku mentation/Überschrift en (--> Für alle Doku mente <--)/1. Ebene/A - F/Bestimmungsg emäßer Gebrauc h @ 18\mod_1 302763321316_1 5.docx @ 103483 @ 1 @ 1
2 Intended use
Pos: 9 /DinA4 - Anleit ungen O nline/Inhalt/KNX/D oorEntry/832 20-AP- xxx/Bestim mungsgemaess erG ebrauch - 83 220-AP-xxx-500 @ 20\mod_1324 561168699_15.docx @ 1127 28@ @ 1
This device is an integral part of the ABB-Welcome door communication system and
operates exclusively with components from this system. The device must only be
installed in dry indoor rooms.
Pos: 10 /Busch-J aeger (Neustru ktur)/Modul- Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okumente <--)/1 . Ebene/U - Z/Umw elt @ 18\mod_1 302614 158967_15.docx @ 103383 @ 1 @ 1
3 Environment
Pos: 11 /B usch-J aeger (Ne ustruktur)/Mo dul-Struktur /Online-Do kumentation/U mwelt (--> Für alle Doku mente< --)/Hinweise/Hi nweis -U mwelt -H inweis Elektrogeräte @ 18\mod_1302 76397343 4_15.docx @ 103500 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
household waste.
–The device contains valuable raw materials that can be recycled.
Therefore, dispose of the device at the appropriate recycling
facility.
Pos: 12 /DinA4 - Anl eitungen Online/Ueb erschriften/2./ABB G eraete @ 19\mod_13 23162843832_ 15.docx @ 110875 @ 2 @ 1
3.1 ABB devices
Pos: 13 /B usch-J aeger (Ne ustruktur)/Mo dul-Struktur /Online-Do kumentation/U mwelt (--> Für alle Doku mente< --)/Hinweise/Hi nweis -U mwelt -A BBEl ektrogeräte@ 1 9\mod_13231627 45839_15.docx @ 110867 @ @ 1
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packaging material and electric devices and their
components via an authorized recycling facility or disposal companies.

ABB-Welcome
|
—4 —
ABB products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)

ABB-Welcome
|
—5 —
Pos: 18 /DinA4 - Anl eitungen Online/Ueb erschriften/1./Bedi enung @ 18\mod_ 1302613924165_15. docx @ 103365 @ 1 @ 1
4 Operations
Pos: 19 /DinA4 - Anl eitungen Online/Ueb erschriften/2./Nor maler Betrieb @ 18\m od_13027688209 65_15.docx @ 103540 @ 2 @ 1
4.1 Standard operations
Pos: 20 /DinA4 - Anl eitungen Online/Ueb erschriften/3./Bedi enelemente @ 20\mo d_13232602205 59_15.docx @ 1116 47@ 3 @ 1
4.1.1 Control elements
Pos: 21 /DinA4 - Anl eitungen Online/Inhalt/ KNX/DoorEntry/8 3220-AP-xxx/Bedienelem ente- 832 20-AP- xxx@ 1 8\mod_13032128 53605_15. docx @ 103673 @ @ 1
Fig.
1
Control elements
1
2
3
9
4
5
6
7
8

ABB-Welcome
|
—6 —
No.
Functions
1
Handset
1A For an incoming call, pick up handset within 30 seconds to activate
communication and hang up to end the call.
1B In standby mode, pick up handset to enter the communication menu.
2
4.3" display
2A M22301-. , with B/W display.
2B M22302-. / M22303-., with color display.
3
Unlock button
3A Open the door by pressing this button at any time.
3B Auto-unlock: The door is automatically opened after incoming call. (For
this function, hold this button for more than 10 seconds until the
backlit LED is on. The same operation will switch off the function and
LED will be off. )
The LED flashes slowly to indicate an incoming call.
The LED illuminates to indicate auto-unlock.
If the LED flashes fast, this indicates system is busy or door is open longer
than set time. (Sensor must be connected first.)
4
Surveillance button
4A In standby mode, press this button to surveil the default outdoor station.
4B While the display is on, press this button to switch to surveil next
outdoor station. (Function is available depending on the type of
installation.)
4C **While the display is on, hold this button to manually take a photo.
4D **In standby mode, if the LED flashes, press this button to display the
"history" menu.
**The LED flashes slowly to indicate a missed call..
5
Mute button
5A In standby mode, press this button to mute ringtone of this indoor
station.
5B In standby mode, long-press the button to mute ringtone of all indoor
stations in the apartment.
5C Press this button to reject incoming call.
5D During a conversation, press this button to mute microphone.
The LED illuminates to indicate mute status.
6
Programmable button 1
6A Release the lock connected with outdoor station (COM-NC-NO)

ABB-Welcome
|
—7 —
(default function).
6B In standby mode, long-press this button for 3 seconds to send SOS
alarm to guard unit. If LED flashes slowly, SOS was successfully sent to
guard unit. If LED flashes fast, SOS was not successful.
6C *Programmable for additional function, e.g. call guard unit, intercom,
etc.
7
Programmable button 2
*Programmable for additional function, e.g. call guard unit, intercom, etc.
8
System setting button
Enter the system setting menu for various functions of the device.
If the LED flashes fast, it means setting is busy.
9
***Induction loop function
*For this function, please contact your electrical installer.
**This funtion is available in M22302-. / M22303-., color video handset indoor station.
***This function is only available in M22303-.
Pos: 22 /Busch-J aeger (Neustr uktur)/Modul-Stru ktur/Online-Do kumentation/Ste uermodule - Onli ne-Dokument ation(--> F ür alle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1

ABB-Welcome
|
—8 —
Pos: 26 /DinA4 - Anl eitungen Online/Ueb erschriften/2./Bedi enaktionen @ 20\ mod_132326229428 1_15.docx @ 111911 @ 2 @ 1
4.2 Control actions
Pos: 27 /DinA4 - Anl eitungen Online/Ueb erschriften/3./Sprec h- und Videoverbin dung @ 20\mod_132 3262368700_15.doc x@ 1 11927 @ 3 @ 1
4.2.1 Incoming call/during a call
Pos: 28 /DinA4 - Anl eitungen Online/Inhalt/ KNX/DoorEntry/8 3220-AP-xxx/Sprech- und Videoverbindung - 83220-AP- xxx@ 2 0\mod_ 1323262341852_15.d ocx @ 111919 @ @ 1
Fig.
2
Incoming call/during a call
During a call, the following functions are available:
No.
Functions
1
Pick up handset to accept the incoming call. During a call, hang up the
handset to end the call.
2
Press this button to open the door from where the call originates.
3-A
Press this button to survey the analog camera of the outdoor station if
applicable.
3-B
Hold this button to take a snapshot.
*This funtion is available in M22302-. / M22303-., color video handset
indoor station.
4
Press this button to mute the ringtone of an incoming call. During a call,
press this button to mute the microphone.
5-A
Press this button to activate the function of the programmable button.
5-B
If the function "release second lock" or "control switch actuator" is assigned
to the programmable button, press this button to activate the function.
6-A
Press this button to enable or disable the full-screen function.
30s
Outdoor 1
2
4
6
7
8
3
5
1

ABB-Welcome
|
—9 —
6-B
Hold this button to enter the brightness setttings.
7
The rest time of the conversation.
8
Number of outdoor stations
Pos: 29 /Busch-J aeger (Neustr uktur)/Modul-Stru ktur/Online-Do kumentation/Ste uermodule - Onli ne-Dokument ation(--> F ür alle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1

ABB-Welcome
|
—10 —
Pos: 30 /DinA4 - Anl eitungen Online/Ueb erschriften/3./Tuer oeff nen @ 20\mod_132 3263277453_15.doc x@ 1 11935 @ 3 @ 1
4.2.2 Display and volume settings during a call
Pos: 31 /DinA4 - Anl eitungen Online/Inhalt/ KNX/DoorEntry/8 3220-AP-xxx/Tuer oeffne n- 83220-AP- xxx@ 2 0\mod_13232679 58479_15.docx @ 112109 @ @ 1
Fig.
3
Display and volume setting during a call
Hold button for 3s to enter the display and volume setttings menu during a call, following
functions are available.
No.
Functions
1
Navigation buttons ( up / down / confirm / cancel, etc.)
2
Press the navigation buttons as needed.
3
Saturation
4
Brightness
5
Value set
*This funtion is available in M22302-. / M22303-., color video handset indoor station.
Pos: 32 /Busch-J aeger (Neustr uktur)/Modul-Stru ktur/Online-Do kumentation/Ste uermodule - Onli ne-Dokument ation(--> F ür alle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1
120s
Outdoor 1
2
3
4
5
1
2

ABB-Welcome
|
—11 —
Pos: 33 /DinA4 - Anl eitungen Online/Ueb erschriften/3./Stu mms chalten @ 20\m od_1323263607142 _15.docx @ 111951 @ 3 @ 1
Pos: 66 /Busch-J aeger (Neustr uktur)/Modul-Stru ktur/Online-Do kumentation/Ste uermodule - Onli ne-Dokumentatio n(--> F ür alle Do kume nte< --)/+++++++ +++++ Seitenumbruch +++++++++ +++ @ 9\mod_1268898668 093_0.docx @ 52149 @ @ 1
4.2.3 Communication menu
Pos: 31 /DinA4 - Anleitungen Onli ne/Inhalt/KNX/D oorEntry/83220-AP- xxx/Tuer o effnen - 83220- AP-xxx @ 20\mod_ 1323267958479_15.d ocx @ 112109 @ @ 1
4.2.3.1 Overview
Pick up handset to enter the communication menu. The following functions are available:
No.
Functions
1
Intercom call
-Press the existing call list to make an intercom call.
2
Call to guard unit
-Call guard unit directly.
3
Broadcast
-Enable the broadcast function in this menu
4
Swtich actuator
-Activate the existing actuator list
4.2.3.2 Intercom call
Fig.
4
: Intercom call
First, set intercom call lists in the "system settings-intercom settings" menu. After choosing a
list, press √to make a call.
INTERCOM CALL
Intercom 1
(001)
Intercom 2

ABB-Welcome
|
—12 —
4.2.3.3 Call guard unit
Fig.
5
: Call guard unit
4.2.3.4 Broadcast
Fig.
6
: Broadcast
This funtion is available in M22302-. / M22303-., color video handset indoor station.
CALL GUARD UNIT
Call Guard Unit
BROADCAST
Long-pressing “√“button to broadcast

ABB-Welcome
|
—13 —
4.2.3.5 Switch actuator
Fig.
7
: Switch actuator
First, set the actuator list in the “system settings-switch actuator”menu.
After choosing a list, press button √to enable the lock or light that is connected to the switch
actuator.
SWITCH ACTUATOR
Actuator 1
(001)

ABB-Welcome
|
—14 —
4.3 Settings
4.3.1 Overview
Press button to enter the system settings menu. The following functions are available:
No.
Functions
1
Intercom settings
-Set intercom lists among different apartments or within the same
apartment
2
Switch actuator
-Set the actuator list in this menu
3
Program button
-Set functions for programmable buttons
4
Call forward
-Set the target (e.g. other indoor stations or guard units) where you wish to
forward calls from visitors when you are away from home.
5
Auto unlock
-Set the automatic unlock time range
6
Set outdoor station password
-Set a customized door open password, which is available for an outdoor
station with a keypad.
7
Ringtone
-Set the ringtone for outdoor bells, indoor bell or others
8
Volume
-Set ringtone volumes
9
Date and time
-Set different times.
10
Other settings
-Other settings, e.g. auto full screen
11
Blacklist
-Set a blacklist that is used to prevent unwanted calls from other
apartment(s)
12
History
-View all communication entries in the menu, e.g. received calls, missed
calls, etc.
13
Language
-Set the language
14
Information
15
Reset factory default
Pos: 27 /DinA4 - Anl eitungen Online/Ueb erschriften/3./Sprec h- und Videoverbin dung @ 20\mo d_1323262368700_ 15.docx @ 1119 27@ 3 @ 1

ABB-Welcome
|
—15 —
4.3.2 Intercom call settings
Fig.
8
: Intercom setting menu
No.
Functions
1
Choose the previous selection or scroll up
2
Choose the next selection or scroll down
3
Confirm the selection or enter to edit it
4
Return to the previous screen
5
Add a new intercom list. A total of 32 intercom lists can be added.
6
Existing intercom list: Press button √to modify the settings.
means an external intercom from different
apartments.
*To establish an external intercom, each apartment must have a master
indoor station.
7
Existing intercom list: Press button √to modify the settings.
means an internal intercom in the same
apartment.
1
2
3
6
4
5
Intercom 1
(001)
Intercom 2
Add New
7

ABB-Welcome
|
—16 —
Add a new list
Fig.
9
: Add new intercom
No.
Functions
1
Enter to choose the call type:
-an external intercom means a call from different apartments.
-an internal intercom means a call from within the same apartment.
2
Enter to change the target address, from 001 to 250.
*If the call type is an internal intercom, there is no need to set the target
address.
3
Rename the intercom list:
Scroll through letters of the alphabet or numbers with “+” or “-” button.
After setting, press “save” to confirm.
1
Call Type
External Intercom
Target Address
Rename
3
INTERCOM
001
mike
Save
Cancel
2

ABB-Welcome
|
—17 —
4.3.3 Switch actuator settings
Fig.
10
: Switch actuator settings
No.
Functions
1
Existing switch actuator list: Press button √to modify the settings.
2
Add a new actuator list. A total of 10 switch actuators can be added..
3
Enter to change target address with “+” or “-” button from 001 to 199.
4
Rename the switch actuator list:
Scroll through letters of the alphabet or numbers with “+” or “-” button.
3
4
SWITCH ACTUATOR
Actuator 1
(001)
Add New
Target Address
Rename
002
light
Save
Cancel
SWITCH ACTUATOR
2
1
Add a new list

ABB-Welcome
|
—18 —
4.3.4 Program button settings
Fig.
11
: Program button settings
No.
Functions
1
Set functions for the program button, e.g. releasing second lock, calling
guard unit, intercom call, enabling the switch actuator.
*second lock means the lock is connected with an outdoor station. (NC-NO-
COM)
*Only the existing intercom call list and switch actuator list can be assigned
to the program button.
Button 1
Release 2nd-Lock
PROGRAM BUTTON
Button 2
None
1

ABB-Welcome
|
—19 —
4.3.5 Call forward settings
Fig.
12
: Call forward settings
No.
Functions
1
Enable/disable the call forward function.
2
Enter to choose a call type, including indoor or guard unit.
3
Enter to change the target address if the call type is an indoor station.
*If the call forward function is activated, the auto unlock function will be disabled.
*This function can only be set in the master indoor station
*This funtion is available in M22302-. / M22303-., color video handset indoor station.
1
2
Call Forward
Call Type
√
Indoor
Save
Cancel
CALL FORWARD
Target Address
001
3
1

ABB-Welcome
|
—20 —
4.3.6 Auto unlock settings
Fig.
13
: Auto unlock settings
No.
Functions
1
Enable/disable the auto unlock function.
2
Enable/disable the auto unlock during Time 1.
3
Set starting time and ending time for Time 1
4
Enable/disable auto unlock during Time 2.
5
Set starting time and ending time for Time 2.
*If you activate the auto unlock function without setting exact working time, this function will be
available for 10 hours.
*If the auto unlock function is activated, the call forward function will be disabled.
*This function only can be set in master indoor station.
1
Auto Unlock
Time 1
2
AUTO UNLOCK
√
√
08
00
17
00
：
：
Time 2
X
00
00
00
00
：
：
4
3
5