ABB Welcome M2303 User manual

VER:1.3 ││28.04.2017
ABB-Welcome
Pos: 2 /D inA 4 - A nl eitun gen Online /Inh al t/K NX/ Doo rEntry /832 20-AP - xxx /Tit elbl at t - 832 20-A P-xxx - AB B @ 1 9\m od_ 132 3249 806 476 _15. docx @ 11 108 4 @ @ 1
M2303
Guard unit
===E nde der List e für Textma rkeC over == =

ABB
-Welcome
| — 2 —
Pos: 4 /B usc h-J a ege r(N eust ruk t ur)/ Modul -St rukt u r/Onli ne-D oku ment ati on /Inh alts ve rzeich ni s ( --> Fü r alle Doku men te <-- )/In hal tsve rzei c hnis @ 19\ mod _13 206 490 4438 6_1 5.d ocx @ 109 653 @ @ 1
1Safety.......................................................................................................4
2Intended use.............................................................................................4
3Environment..............................................................................................4
3.1 ABB devices.............................................................................4
4Operation..................................................................................................6
4.1 Standard operation....................................................................6
4.1.1 Control elements.......................................................................6
4.1.2 Welcome screen and status bar.................................................8
4.2 Control actions........................................................................10
4.2.1 Incoming call/during a call .......................................................10
4.2.2 Display settings during calls.....................................................12
4.2.3 Intercept mode........................................................................13
4.2.3.1 VIP settings ............................................................................15
4.2.4 Communication.......................................................................18
4.2.5 Surveillance............................................................................21
4.2.6 Switch actuator .......................................................................22
4.2.7 User list ..................................................................................23
4.2.8 History....................................................................................25
4.2.9 Settings (basic).......................................................................28
4.2.9.1 Ringtone settings....................................................................28
4.2.9.2 Volumesettings......................................................................29
4.2.9.3 Date and time settings.............................................................30
4.2.9.4 Other settings .........................................................................31
4.2.9.5 Language settings...................................................................32
4.2.9.6 Information..............................................................................33
4.2.10 Settings (advanced)................................................................34
4.2.10.1 Switch actuator settings...........................................................35
4.2.10.2 Program button settings ..........................................................37
4.2.10.3 User list management .............................................................38
4.2.10.4 Call code settings....................................................................42
4.2.10.5 Password settings...................................................................43
4.2.10.6 Reset factory default ...............................................................44
4.2.10.7 Reset password and clear all data...........................................45
4.3 Cleaning.................................................................................46
4.4 Adjusting the device................................................................47
5 Technical data.........................................................................................48

ABB
-Welcome
| — 3 —
6Mounting/installation................................................................................49
6.1 Requirements for the electrician...............................................49
6.2 General installation instructions...............................................50
6.3 Mounting.................................................................................51
===E nde der Liste für Tex tmarke TOC == =

ABB
-Welcome
| — 4 —
Pos: 6 /B usc h-J a ege r(N eust ruk t ur)/ Modul -St rukt u r/Onli ne-D oku ment ati on /Übe rschri ften (--> Für alle D ok ument e < --)/ 1. Eb ene/S - T /Si cher heit @ 18\ mod _13 026 127 917 90_ 15.d ocx @ 103 357 @ 1 @1
1Safety
Pos: 7 /B usc h-J a ege r(N eust ruk t ur)/ Modul -St rukt u r/Onli ne-D oku ment ati on /Si cher heit (--> Für al le Dok um ente <--)/Wa rn hi nweis e /Si cher heit - 23 0 V @ 18\m od_ 130 260 681 675 0_15 .docx @ 1 033 08 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or
indirect contact with live components.
This can result in electric shock, burns or even death.
■Disconnect the mains power supply prior to installation and/or
disassembly!
■Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Pos: 8 /B usc h-J a ege r(N eust ruk t ur)/ Modul -St rukt u r/Onli ne-D oku ment ati on /Übe rschri ften (--> Für alle D okum ent e < --)/ 1. Eb ene/A - F /Bes tim mun gsge mä ßer Geb rau ch @ 18\ mod _13 027 6332 131 6_1 5.do cx @ 1034 83 @ 1 @ 1
2Intended use
Pos: 9 /D inA 4 - A nl eitun gen Online /Inh al t/K NX/ Doo rEntry /832 20-A P- xxx /Bes ti mmu ngsg em aesse r Ge bra uch - 83 220 -AP -xxx- 500 @ 2 0\mo d_1 324 561 168 699 _15. docx @ 11 272 8 @ @ 1
This device is an integral part of the ABB-Welcome door communication system and
operates exclusively with components from this system.
Pos: 10 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Übe rsch ri fte n ( --> Fü r all e D oku men te < --)/1. E bene /U - Z/U mwelt @ 18\ mod _13 026 141 5896 7_1 5.d ocx @ 103 383 @ 1 @ 1
3Environment
Pos: 11 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Umw el t ( --> F ür all e Dok u me nte <-- )/Hinw eis e/H inw ei s - U mwel t - H inwei s E lektr oge räte @ 1 8\mo d_1 302 763 973 434 _15. docx @ 10 350 0 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
household waste.
– The device contains valuable raw materials that can be recycled.
Therefore, dispose of the device at the appropriate recycling
facility.
Pos: 12 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/2 . /AB B Gera ete @ 19 \mo d_1 323 162 843 832_ 15. docx @ 11 087 5 @ 2 @ 1
3.1 ABB devices
Pos: 13 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Umw el t ( --> F ür all e Dok u me nte <-- )/Hinw eis e/H inw ei s - U mwel t - A BB E lektro ger äte @ 19\ mo d_1 3231 627 458 39_ 15.d ocx @ 110 867 @ @ 1
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packaging material and electric devices and their
components via an authorized recycling facility or disposal companies.

ABB
-Welcome
| — 5 —
ABB products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)

ABB
-Welcome
| — 6 —
Pos: 18 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/1 ./ Bedie nun g @ 18\m od_ 130 261 392 416 5_15 .docx @ 1 033 65 @ 1 @ 1
4Operation
Pos: 19 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/2 . /Nor male r B et rieb @ 18 \ mod_1 302 768 8209 65_ 15. docx @ 10 3540 @ 2 @ 1
4.1 Standard operation
Pos: 20 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/3 . /Bedi e nele men te @ 20\ mod _13 232 6022 055 9_1 5.do cx @ 1 116 47 @ 3@ 1
4.1.1 Control elements
Pos: 21 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/ 83 220 -AP -xxx/B e dienel eme nte - 8 322 0-AP -xxx @ 18\ mo d_1 3032 128 536 05_ 15.d ocx @ 103673 @ @ 1
Fig. 1 Overview of the control buttons

ABB
-Welcome
| — 7 —
No. Function
1Handset
For incoming call, pick up handset within 30 seconds to activate the call.
Hang up handset to end the call.
24.3“ touch screen.
3Unlock button
Press this button to open the door at any time.
If the LED flashes slowly, this means an incoming call.
If the LED flashes rapidly, it means system is busy or the door has been
opened over the set time. (The sensor must be connected first.)
4Surveillance button
In standby mode, press this button to survey the default outdoor station.
5 Programmable buttons 1,2,3
5A *Programmable buttons for additional functions, e.g. controlling the
switch actuator.
5B Default function of button 1 is to release the lock connected with an
outdoor station (COM-NC-NO)
6 System settings button
Enter into the system settings for various functions of the device.
*For this option, please contact your electrical installer.

ABB
-Welcome
| — 8 —
4.1.2 Welcome screen and status bar
Fig. 2 Start
On the start page, the following functions are available:
No. Function
1Intercept
- Click on this icon to enter intercept settings.
2Communication
- Click on this icon to enter communication menu.
3Surveillance
In standby mode, press this button to survey the default outdoor station.
4 Switch actuator
- Click on this icon to enter the switch actuator menu and enable the
existing actuators.
5User list
- Click on this icon to check the contact list.
6History
- Click on this icon to enter the history menu. All events and alarms from
indoor stations can be found here.
7System settings (basic)
- Click on this icon to set some basic functions for the device,
e.g. ringtone, volume and language.
START
1
2013/01/01 00:00
2 3 4
967 8
10
5
11 12 13

ABB
-Welcome
| — 9 —
8System settings (advance)
- Click on this icon to set the various advanced functions for the
device, e.g. switch actuator setting and user list management.
9Date and time
- Click on this icon to enter date and time settings.
10 Cleaning locking
- This icon appears when the display is locked to prevent functions being
triggered during cleaning.
11 Alarm history
- This icon appears when new alarm information is available in the alarm
history.
- Click on this icon to display the events.
12 Call history
- This icon appears when new call information is available in the call
history.
- Click on this icon to display the events.
13 Intercept
- This icon appears when the guard unit is in intercept mode.
Pos: 22 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Steu er mod ul e - O nlin e-Dok ume ntati on ( -- > Für alle Dok ume nte <- -)/ +++ ++ +++++ ++ S ei ten umb ruch + +++ ++++ +++ + @ 9\ mod_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1

ABB
-Welcome
| — 10 —
Pos: 26 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/2 ./ Bedie nak ti onen @2 0\ mod_ 1323 262 294 281 _15. docx @ 11 191 1 @ 2 @ 1
4.2 Control actions
Pos: 27 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/3 ./ Spr ech- und V ideov erbi ndu ng @ 20\ mod_13 232 6236 870 0_1 5. do cx @ 111927 @ 3 @ 1
4.2.1 Incoming call/during a call
Pos: 28 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/ 83 220 -AP -xxx/S p rech - u nd Vi de over bind ung -8 322 0-A P-xx x @ 20\ mo d_1 3232 623 418 52_ 15.d oc x @ 111 919 @ @ 1
Fig. 3 Incoming call from outdoor station
When Outdoor station calling, the following functions are available:
No. Function
1The rest time of the conversation.
2Number of outdoor stations.
3Surveillance
Click on this icon to surveil the analog camera of the outdoor
station (if applicable).
4Snapshot
- Click on this icon to take a snapshot.
5Display settings
- Click on this icon to enter the display settings.
6End the connection.
Pos: 29 /B us ch-J aeg er (N eus truk tur )/M odul -S trukt ur/O nli ne -Doku me ntati o n/Steu er mod ul e - O nlin e-Dok ume ntati on ( -- > Für alle Dok ume nte <- -)/ +++ ++ +++++ ++ S ei ten umb ruch + +++ ++++ +++ + @ 9\ mod_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1
1
5
6
END
030s
Outdoor
-
1
＜ ＞
1-1
2
3
4

ABB
-Welcome
| — 11 —
Pos: 30 /D i nA 4 - A nlei tu ngen Onl in e/U eb ersc hrift en/3 ./ Tuer oeff nen @ 2 0\mo d_1 323 263 277 453 _15. doc x @ 11 193 5 @ 3 @ 1
Fig. 5 Incoming call from indoor station
When Indoor station calling, the following functions are available:
No. Function
1The rest time of the conversation.
2User name
If physical address is associated with address of indoor station, only the
user name will be displayed, not the physical address.
3End the connection.
1
3
END
030s
Indoor
Jacky
2

ABB
-Welcome
| — 12 —
4.2.2 Display settings during calls
Pos: 31 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/83 220 -A P-x xx/ Tue r o effne n - 832 20-A P-x x x @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 6 Display settings during calls
The following functions are available if you press button.
No. Functions
1Adjust the saturation of the display through the ”plus/minus” buttons.
2 Adjust the brightness of the display through the “plus/minus” buttons.
1
END
120s
Outdoor
-
1
+
-
3
2

ABB
-Welcome
| — 13 —
4.2.3 Intercept mode
Pos: 31 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/83 220 -A P-x xx/ Tue r o effne n - 832 20-A P-x x x @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 7 Intercept mode
In the “intercept mode”, following functions are available:
No. Function
1Activate or deactivate the intercept function by ticking the checkbox
2Activate the intercept function to intercept calls for all users or for VIPs
only.
- ”All” means that the guard unit will intercept calls for all users.
- “VIP” means that the guard unit will intercept calls for VIPs only.
3Set VIPs (if applicable)
- Click on this button to set the VIPs.
4 Choose the type of intercept by ticking the checkbox
- Choose from "permanent" mode or "repeat" mode.
5“plus/minus” buttons.
6Back
- Click on this button to return to the start page without saving the settings.
7OK
- Click on this button to save the settings.
8 In the “repeat” mode, the timer(s) must be activated by ticking the
checkbox.
Back
INTERCEPT
×
Intercept For
ALL
Type
Per
manent
Start Time 1
×
08
30
×
18
30
Start Time 2
End Time 1
08
30
18
30
End Time 2
OK
-
+
Set VIP
1
5
2 3
8
4
7
6

ABB
-Welcome
| — 14 —
- When the timer is activated, set the start time and end time via the
“plus/minus” buttons.
- Before adjusting the "hour" or "minute," the active range is highlighted in
blue.
- End time > start time
The function can only be set through master guard unit.

ABB
-Welcome
| — 15 —
4.2.3.1 VIP settings
Press to set the VIPs. A total of 64 entries can be added.
Fig. 8 VIP settings
The following functions are available:
No. Functions
1Select "user name," then click on "add" button to add new VIPS by user
name (from contact lists).
2Select "physical address," then click on "add" button to add new VIPs by
their physical address..
3“VIP”
- Click on the “VIP” button to check the VIP list.
4“Add”
- Click on the “add” button to add new VIPs.
5“Back”
- Click on the “back” button to return to the “intercept” page.
6“Scroll”
- Switch to other settings by ticking the scroll box.
Set VIP
Back
User Name
Add
VIP
6
1
4
5
Physical Address
3
VIP SETTING
2

ABB
-Welcome
| — 16 —
Press to set VIPs.
Fig. 9 VIP list
The “VIP list” menu has the following functions:
No. Functions
1VIP list
- Displays all VIPs.
2“View”
- Click on this button to display specific information about the selected VIP.
3“Delete”
- Click on this button twice to delete the selected VIP.
4“Back”
- Click on this button to return to the VIP settings menu.
VIP
Back
VIP List
Alexander.G
Delete
View
1
3
4
Bodin.K
2
1/5
Christian.G
Elizabeth.G
Tom

ABB
-Welcome
| — 17 —
Select “physical address” and press the “add” button to enter “add” menu.
Fig. 10 Add VIPs by physical address
No. Functions
1Enter a physical address with the numeric keypad.
2 “Add”
- Click on this button to add a new VIP. Enter the correct physical address
before pressing this button.
3“Back”
- Click on this button to return to the VIP settings menu.
Back
VIP SETTING
Add
1
2
3

ABB
-Welcome
| — 18 —
4.2.4 Communication
Pos: 31 /D i nA 4 - A nlei tu ngen Onl in e/In hal t/KN X/D o orEnt ry/83 220 -A P-x xx/ Tue r o effne n - 832 20-A P-x x x @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 11 Call indoor station
The “call indoor station” menu has the following functions:
No. Functions
1Click on the “call indoor station”.
2Enter a physical address or logic address to make a call to an indoor
station. (Select physical address or logical address from call settings.)
3“Contact”
Press “contact” button to display the contact list and make a call directly
by user name.
4“Call”
- Click on this button to make a call after you enter the number.
5“Back”
- Click on this button to return to the start page.
Back
CALL INDOOR STATION
Call
2
4
5
Contact
1
3

ABB
-Welcome
| — 19 —
Fig. 12 Call to indoor station
When guard unit calls indoor station, the following functions are available:
No. Function
1The rest time of the conversation.
2User name
If physical address is associated with address of indoor station, only the
user name will be displayed, not the physical or logical address.
3If indoor station answers the call, guard unit will display "enable" and will
send the image from associated camera interface to indoor station and
guard unit itself.
4End the connection.
1
4
END
113s
Indoor
Jacky
2
E
nable
3

ABB
-Welcome
| — 20 —
Fig. 13 Call guard unit
The “call guard unit” menu has the following functions:
No. Functions
1Click on the “call guard unit.”
2Enter a guard unit address.
If the called guard unit is in the same building, press 1-9 to make a call.
If the called guard unit is not in the same building, press the building
number + guard unit address to make a call, e.g. building number (1-60)
plus guard unit address (1-9).
3“Call”
- Press this button to make a call after you enter the number.
4“Back”
- Press this button to return to the start page.
Back
CALL GUARD UNIT
Call
2
3
4
1