ABB Welcome M21311P1-A User manual

VER:1.0 │ │ 06.01.2016
ABB-Welcome
Pos: 2/Di nA4 - Anleitung enO nline/Inhalt/KNX/D oorEntry/832 20-AP-xxx/Tit elblatt - 83220-AP-xxx - ABB @ 19\mod_1 323249806476_15. docx@ 11 1084@ @ 1
M21311P1-A
M21311P2-A
M21312P1-A
M21312P2-A
Mini outdoor station

ABB-Welcome
|
—2 —
Pos: 4 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Inhalts verzeichnis (--> Für alleD okument e<--) /Inhaltsverzeichnis @ 19\ mod_132064904438 6_15.docx @ 109653 @ @ 1
1Safety............................................................................................................3
2Intended use..................................................................................................3
3Environment ..................................................................................................3
3.1 ABB devices.................................................................................3
4Terminal description......................................................................................5
4.1 Front overview..............................................................................5
4.2 Terminal description .....................................................................6
4.2.1 Lock connected with terminals 10 and 11.....................................8
5Operation.......................................................................................................9
5.1 Configure functions of the 1st/2nd pushbutton .............................9
5.2 Configure functions of the general call button.............................11
5.3 Round pushbutton with ID card reader.......................................12
5.4 Setting the language for the voice messages.............................13
6Technical data.............................................................................................14
7Mounting/installation....................................................................................15
7.1 Requirements for the electrician.................................................15
7.2 General installation instructions..................................................16
7.3 Mounting.....................................................................................17
7.3.1 Preparation.................................................................................17
7.3.2 Dimension...................................................................................17
7.3.3 Surface mounted ........................................................................17
7.3.4 Dismantling.................................................................................17
7.3.5 Replace nameplate.....................................................................18
=== Ende der Liste fürT extmarke TOC ===

ABB-Welcome
Safety
|
—3 —
Pos: 6 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Überschrift en( --> Füralle Do kumente <--)/1. Ebene/S - T/Sicherheit @ 1 8\mod_1302612791 790_15.docx @ 103357 @ 1 @ 1
1 Safety
Pos: 7/ Busch-Jaeger (Neus truktur)/Modul-Str uktur/Online-Dokum entation/Sicherheit (--> Für alle Doku mente< --)/Warnhin weise/Sicherheit - 230 V @ 18\mod_1302606 816750_15.docx @ 103308 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
–Work on the 100-240V supply system may only be performed by
authorized electricians!
–Disconnect the mains power supply prior to installation and/or
disassembly!
Pos: 8 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokumen tation/Überschrifte n( --> Für alle Dokum ente <--)/1. Ebene/A - F/Bestimmungsg emäßer Gebrauch @ 18\mod_1 302763321316_15.doc x@ 1 03483@ 1 @ 1
2 Intended use
Pos: 9/Di nA4 - Anleitung enO nline/Inhalt/KN X/DoorEntry/832 20-AP-xxx/B estimmungsg emaesser Gebra uch- 8 3220-AP-xxx-500 @ 20\mod_1 324561168699_15.d ocx@ 1 12728 @ @ 1
The outdoor station is an integral part of the ABB-Welcome door communication system
and operates exclusively with components from this system. The device must only be
used with suitable ABB flush-mounted installation sockets and rain hood.
Pos: 10 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /1. Ebene/U - Z/Umwelt @ 18\ mod_1302614158 967_15.docx @ 103383 @ 1 @ 1
3 Environment
Pos: 11 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alleD okum ente<--)/Hi nweise/Hin weis- U mwelt- Hinweis Ele ktrogeräte@ 18\m od_13027639734 34_15.docx @ 103500 @ @1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
household waste.
–The device contains valuable raw materials that can be recycled.
Therefore, dispose of the device at the appropriate collecting
facility.
Pos: 12 /DinA4 - Anleitunge n Online/Ueberschrif ten/2./ABB Gera ete@ 1 9\mod_132 3162843832_15.doc x@ 1 10875 @ 2 @ 1
3.1 ABB devices
Pos: 13 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alleD okum ente<--)/Hi nweise/Hin weis- U mwelt- ABB Ele ktrogeräte@ 19\m od_1323162745839_1 5.docx @ 110867 @ @1
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packing materials and electric devices and their
components via authorized collection facilities and disposal companies.

ABB-Welcome
Environment
|
—4 —
ABB products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)

ABB-Welcome
Terminal description
|
—5 —
4 Terminal description
4.1 Front overview
Fig.
1
Front overview
No.
Function
1
Light sensor
2
Infrared LED-a total of 6
3
Indicated LED-a total 3: ring, call and door open
4
Speaker and microphone integration
5
Round pushbutton
*If round pushbutton with ID card reader，see details in the
chapter 5.3
6
Nameplate
1
2
4
3
5
6
3

ABB-Welcome
Terminal description
|
—6 —
4.2 Terminal description
Fig.
2
Terminal description
No.
Functions
1
Connector for device software update
2
Rotary switch to set the address of outdoor station (1-9)
3
Set feedback tone of pushbutton ON/OFF
4
Set general call to all indoor stations in one family
GC=ON, press button1/button2, all indoor stations ring
For details, see Chapter 5.2
5
Configuration function of 1st/2nd round pushbutton
For details, see Chapter 5.1
1
2
3
4
5
6
7
8
9
10
11
12
13

ABB-Welcome
Terminal description
|
—7 —
6
Set the video mode PAL/NTSC
OFF=PAL video mode
ON=NTSC video mode
7
Set default lock
OFF= set (Lock-GND) as default lock
ON= set (COM-NC-NO) as default lock
*Default lock is controlled by “unlock” button on indoor station
8
Plug-in clamps (a, b) for connection
9
Plug-in clamps (Exit-GND) for exit button
10
Plug-in clamps (Lock-GND) for door opener
11
Plug-in clamps (COM-NC-NO) for floating output, door opener
12
Rotary switch to adjust default door lock release time:1-10s
13
Rotary switch to adjust loudspeaker volume

ABB-Welcome
Terminal description
|
—8 —
4.2.1 Lock connected with terminals 10 and 11
Exit
Exit
Exit

ABB-Welcome
Operation
|
—9 —
5 Operation
Pos: 19 /DinA4 - Anleitunge n Online/Ueberschrif ten/2./Norm aler Betrieb @ 18\mod_ 1302768820965_ 15.docx @ 103540 @ 2 @ 1
Pos: 20 /DinA4 - Anleitunge n Online/Ueberschrif ten/3./Bedienel emente @ 20\mod_ 132326022055 9_15.docx @ 111647 @ 3 @ 1
5.1 Configure functions of the 1st/2nd pushbutton
Fig.
3
Addressing
No.
Functions
1
3->OFF, 4->OFF
2
Call apartment 001
3
Call apartment 002
No.
Functions
1
3->OFF, 4->ON
2
Call guard unit
3
Call apartment 001
3
4
DIP
1
2
3
001
002
3
4
DIP
1
2
3
Guard
001

ABB-Welcome
Operation
|
—10 —
No.
Functions
1
3-> ON, 4->OFF
2
Switch on light
3
Call apartment 001
No.
Functions
1
3->ON, 4->ON
2
Call apartment 001
3
Call apartment 002
3
4
DIP
1
2
3
001
Light
3
4
DIP
1
2
3
001
002

ABB-Welcome
Operation
|
—11 —
5.2 Configure functions of the general call button
No.
Functions
1
2->OFF
2
Call apartment 001, both 001 indoor stations ring
3
Call apartment 002, both 002 indoor stations ring
No.
Functions
1
2->ON
2
Call apartment, all 4 indoor stations (different address) ring
3
Call apartment, all 4 indoor stations (different address) ring
* If the "call forward function" has been set at the indoor station, this function will not
work well.
For example, 001IS has set call forward to 002 IS, when press 1st round pushbutton on
OS to call 001 IS, if 001 IS doesn’t answer the call in 5s, it will not transfer to 002 IS.
2
DIP
1
2
3
001
001
002
002
2
DIP
1
2
3
001
002
003
004

ABB-Welcome
Operation
|
—12 —
5.3 Round pushbutton with ID card reader
Programming
Function
Command
Indicated LED for door open
Create admin card
Swipe card 1x
Green
Enter settings
Swipe admin card 1x
Orange
The system will take the first card swiped after powering up the system within 60s to be the
admin card.
After enter settings, following functionalities can be implemented:
Function
Command
Indicated LED for door open
Enroll user
Swipe admin card 1x
Orange flash 1x
Swipe card (new user) 1x
Green
Delete user
Swipe admin card 2x
Orange flash 2x
Swipe card (user x) 1x
Green
Enroll new admin
Swipe admin card 3x
Orange flash 3x
Swipe card (new admin) 1x
Green
Delete admin
Swipe admin card 4x
Orange flash 4x
Swipe card (admin x) 1x
Green
Delete all users
Swipe admin card 5x
Orange flash quickly
Swipe admin card 1x
Green
During setting, please swipe the same admin card.
Function
Command
Indicated LED for door open
Exit settings
Swipe admin card 1x or no cards
swiped within 15 seconds
——
Open a door
Function
Command
Indicated LED for door open
Open a door
Swipe the enrolled keycard
Green
Reset to factory default
Function
Command
Indicated LED for door open
Reset to factory
default
Disconnect the power supply.
Set rotary switches of address to "0"
and set all the dip-switches to "OFF "
Reconnect the power supply
Long press the 1st button for 3s
Finish
——
——
——
Green
Red, green, orange cycle
——

ABB-Welcome
Operation
|
—13 —
5.4 Setting the language for the voice messages
When outdoor station power is on;
1.Set outdoor station address as "0" and switch all the dip-switches to "ON."
2. Long-press the 1st button for 3s to play the voice message.
If in English, an "English" voice will be played.
If in French, a French voice will be played.
If "DI" is played, it means the voice synthesis function is disabled.
3. Short press the 1st button to change the language.
4. After choosing desired language, long-press the 1st button to save and exit.

ABB-Welcome
Technical data
|
—14 —
Pos: 76 /DinA4 - Anleitunge n Online/Ueberschrif ten/1./Technisc heD aten @ 18\mo d_1302615863001_ 15.docx @ 103416 @ 1 @ 1
6 Technical data
Pos: 77 /DinA4 - Anleitunge n Online/Inhalt/KN X/DoorEntry/83 220-AP-xxx/Technische Daten - 83220-AP-xxx @ 18\mod_13032 12854559_15.doc x@ 10370 5@ @ 1
Designation
Value
Operating temperature
-40 ℃- +70 ℃
Protection (cover frame
assembled)
IP 54
Power supply, door opener
(Lock-GND)
18V 4A impulsive, 250 mA holding
Floating output, door opener
(COM-NC-NO)
30 V AC / DC 1A
Single-wire clamps
2 x 0.28 mm2- 2 x 0.75 mm2
Fine-wire clamps
2 x 0.28 mm2- 2 x 0.75 mm2
Bus voltage
20-30 V
Pos: 78 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1

ABB-Welcome
Mounting/installation
|
—15 —
Pos: 79 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /1. Ebene/M - O/Mont age /I nstallation @ 18\mo d_130261396611 1_15.docx @ 103373 @ 1 @ 1
7 Mounting/installation
Pos: 80 /Busch-Jaeger (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokumente <--) /Warnhinweise/Sich erheit- Ni ederspan nungs- und 230 V-Leitunge n @ 18\mod_13 02617821491_15. docx @1 03465 @ @1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
–Low-voltage and 100-240 V cables must not be installed together
in a flush-mounted socket!
In case of a short-circuit there is the danger of a 100-240 V load
on the low-voltage line.
Pos: 81 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokumente <--) /Warnhinweise/Sicherh eit- Fac hkenntnisse @ 18\mod_130 2774384017_15.doc x@ 1 03564 @ 2@ 1
7.1 Requirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
•Incorrect installation endangers your life and that of the user of
the electrical system.
•Incorrect installation can cause serious damage to property, such
a fire.
The minimum necessary expert knowledge and requirements for the
installation is as follows:
•Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power source.
2. Secure against being re-connected.
3. Ensure that there is no voltage.
4. Connect to the earth.
5. Cover or barricade adjacent live parts.
•Use suitable personal protective clothing.
•Use only suitable tools and measuring devices.
•Check the type supply network (TN system, IT system, TT system)
to secure the following power supply conditions (classic
connection to the ground, protective grounding, necessary
additional measures, etc.)
Pos: 82 /DinA4 - Anleitunge n Online/Inhalt/KN X/DoorEntry/Mo ntage/Montage hinweise - Allgemein @ 19\ mod_13105636 70478_15.docx @ 107 743 @ 2@ 1

ABB-Welcome
Mounting/installation
|
—16 —
7.2 General installation instructions
•Terminate all branches of the wiring system via a connected bus device (e.g.,
indoor station, outdoor station, system device).
•Do not install the system controller directly next to the bell transformer and other
power supplies (to avoid interference).
•Do not install the wires of the system bus together with 100-240 V wires.
•Do not use common cables for the connecting wires of the door openers and wires
of the system bus.
•Avoid bridges between different cable types.
•Use only two wires for the system bus in a four-core or multi-core cable.
•When looping, never install the incoming and outgoing bus inside the same cable.
•Never install the internal and external bus inside the same cable.
Pos: 83 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1

ABB-Welcome
Mounting/installation
|
—17 —
Pos: 84 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /2. Ebene/M -O /Montage @ 18\mod_130 2615960458_15. docx@ 10 3424@ 2 @ 1
7.3 Mounting
Pos: 85.1 /DinA4 - Anleitu ngen Online/Inhalt/KN X/DoorEntry/83 220-AP-xxx/Montage - M odule/Montage - Mo ntagedose -- 83220-AP- xxx@ 1 9\mod_132325 0406848_15.docx @ 111098 @ @ 1
7.3.1 Preparation
7.3.2 Dimension
7.3.3 Surface mounted
图1，把后壳锁在墙上
图2，后壳接线
图3，把前壳与后壳盖上
7.3.4 Dismantling
Use gloves to protect yourself
from being cut.
99mm
168mm
26mm

ABB-Welcome
Mounting/installation
|
—18 —
7.3.5 Replace nameplate
s:9 4 /Busc h-Jaeger (N eustrukt ur)/Modul-Stru ktur/Online-D okument ation/Steuer module - Onlin e-Dokum entation (--> Für alle Dokumente <--) /++++++++ ++++ Seitenumbruch ++++ ++++++++ @ 9 \mod_1268 898668093_0.d ocx @ 52149 @ @ 1

ABB-Welcome
Mounting/installation
Pos: 94 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1
Pos: 95 /DinA4 - Anleitunge n Online/Inhalt/KN X/DoorEntry/Pr ojektierung-Mer kblatt/ProjektierP os:9 7/ Busch-Jaeger (Neus truktur)/Modul-Str uktur/Online-Do kumentation/Rückseiten (--> Für alle Doku mente< --)/Rückseite -B usch-Jaeger - Allgemein @ 20\mod _1327320074886 _15.docx @ 137103 @ @1
Notice
=== Ende der List ef ür Textmar keB ackcover ===
We reserve the right to at all times make technical changes as well as changes to the
contents of this document without prior notice.
The detailed specifications agreed to at the time of ordering apply to all orders. ABB
accepts no responsibility for possible errors or incompleteness in this document.
We reserve all rights to this document and the topics and illustrations contained
therein. The document and its contents, or excerpts thereof, must not be reproduced,
transmitted or reused by third parties without prior written consent by ABB.