ABB aquamaster User manual

1
ABB Limited
Oldends Lane, Stonehouse, Gloucestershire, GL10 3TA, UK
Tel: [phone] Fax: [phone]
Printed in UK (07.05) © ABB 2005
Electronic Commercial Water Meter
AquaMasterTM
Quick Reference Guide
IM/AM/QRG_13
All manuals and user guides at all-guides.com
all-guides.com

2
88888.888.8gal
m3
AB .8.8.8.80
ftm
3
/hMGD
gal/sm Barpsi
0
-
Pictorial Displays
Left Battery Warning
Sensor Fault
Empty Pipe
Mains Failure
Right Battery Warning
Lower Display
Time
Flow Velocity
Upper Display
Date
Forward Flow Total
Reverse Flow Total
Net Flow Total
Tariff Total
Tariff
Indicator
This Quick Reference Guide is applicable
to product firmware version 1.25 or
greater. The transmitter version number
can be obtained by keying >0
When the unit is taken out of storage and
installed for first use, remove the
protective label (if fitted) from the front to
allow light to activate the unit.
If the instrument is not powered, connect
any batteries or external supply as
detailed in the Installation Manual.
Important. Read the manual
for battery condition monitoring.
Setting up the PC – HyperTerminal Setup
(Example from Windows NT – other versions of
Windows vary)
From the Windows Start menu choose Programs
– Accessories – Hyperterminal – HyperTerminal.
At 'New connection' enter : AquaMaster
At 'Connect using' choose : COM1 or COM2
(depending on the PC connection)
At 'Port setting' prompt choose Bits per second:
4800, Data bits: 8; Parity: None; Stop bits: 1; Flow
control: none.
Programming the AquaMaster
To access programming mode, connect the
AquaMaster to a computer via either of the serial
port connections – see Instruction Manual ('Local
or Remote Computer Connection' sections).
Use serial port settings: Baud: 4800; Data bits 8;
Stop bits: 1; Parity: no.
Press
Tab
twice to activate the programming
mode.
The following display appears on the computer
screen:
AquaMaster…
Nav Mode: TAB, Disp Mode: Ctrl + W
Pressing the
Ctrl
+
W
keys simultaneously
initiates display mode, with the same information
as that on the transmitter display.
Press
Esc
to cancel display mode.
Pressing the
Tab
key produces the following
screen:
[Next Menu=TAB][Next Item=ENTER]
[Edit = SPACE][Exit = ESC]
1.0 Information
CONTROLS AND DISPLAY
PROGRAMMING
Controls and Display
All manuals and user guides at all-guides.com

3
4.0 Access
Language :English
Login (Password?) :Log In Level 0
Space
Login (Password?)?
Login (Password?) :2 Level Logged In
4.0 Access
5.0 Flow Settings
6.0 Pressure Settings
etc.
Tab
Setup
Space
Tab
Esc
Tab
Tab
2.0 Measurements
12:31:00
25/12/1998
Test Mode
Flow
1.0 Information
AquaMaster
ABB Limited
Stonehouse
etc.
Tab
Esc
Tab
Note. Passwords are case sensitive and may
be changed by the user in menu 4.0.
Logging In
…PROGRAMMING
Further key operations access the menus as follows:
Key
= Menu Displayed Text; = User entered data ; =
Function Key
Note. Pressing
M
within a menu displays all the remaining parameters immediately.
There are two levels of password control:
Level Default Menus
Password
2setup 1 to 7
4am2k 1 to 10
SECURITY ACCESS
All manuals and user guides at all-guides.com

4
>217 <0>217=42
>217=42 <3>217=Write Access Denied
Comments
>248=setup <0>248=2 logged in enter password
>112 <0>112=1 l/s read present flow units
>115 <0>115=250 read present fsd
>115=10 <0>115=10 set new fsd value of 10
>112=6 <0>112=6 m
3
/m set units to number 6 (m
3
/min)
Flow Units : l/s
Flow Units? l/s
Flow Units? l/m
Flow Units : l/m
FSD(100% or URV) 200 l/m
(Repeat space function key until
required units are displayed)
Tab Space
Space
PARAMETER CHANGES
Note. Use
Esc
to escape or cancel in input
mode, or to exit a menu.
Where
217 is the number for the flow rate
<0> is the error code for 'no error'
42 is the current flow rate
<3> is the error code for 'Write Access Denied',
since writing to the flow rate is not allowed.
To change the flow FSD to 10 m3/min:
To cancel the password security, press
Esc
until the front screen is reached.
Changing Selections
Note. Ensure that the correct access level is selected.
It is possible to enter data directly into the AquaMaster without navigating the menu system. This is
achieved by using the 'Command Line Interface' (CLI). To read the value of a variable, type
>
followed by the variable number (see overleaf), then press .
To write a new value to a variable, type
>
, the variable number,
=
and the new value required, followed
by . In both cases the AquaMaster will reply with the new value of the variable (or a reason for failure) e.g.:
All manuals and user guides at all-guides.com

5
MENU LAYOUT
noitamrofnI0.1
991retsaMauqAR
002detimiLBBAR
102esuohenotSR
202AT301LG,KU,dnalgnER
3021666283541)0(44+letR
402moc.bba.bg@wolfR
361renwO:2
261noitacoL:2
602egasseM:2
rosneSwolFR
1.D.I:R
71tcartnoC:R
8epyTreteM:R
72etaD.laC:4
82.oN.treC:4
33DIetiS/gaTwolF:4
732)mm(eroB:R
12gniniL:R
22sedortcelE:R
32segnalF:R
42ydoB:R
rettimsnarTR
702.D.I:R
802.N.I.P:R
902tcartnoC:R
212gaTrettimsnarT:2
tixE:0
stnemerusaeM0.2
352emiT:4
452etaD:4
332edoMtseT:*4
642smralA:4
712wolF:R
812%wolF:R
912yticoleV:R
#
852tuptuOesluP:R
422dwF:4
Z
522veR:4
Z
622teN:4
Z
722AffiraT:4
Z
822BffiraT:4
Z
132)syaD(.ttaBtfeL:R
232)syaD(sniaM/ttaBthgiR:R
542)syaD(.ttaBtfeL.verP:R
992)syaD(.ttaBthgiR.verP:R
432)mhok(AgiS:R
532)mhok(BgiS:R
tixE:0
*ces/m1otyticolevwolfehtstesedoMtseT
,veR,dwFstceffaylnO.sesopruptsetrof
.tuptuOesluPdnasresilatotteN
Z.ylnooreZotteseR
#sas/tfotderetlaebyamstinuyticoleV
:)2sseccAleveLetirW(swollof
5=901> s/tf5=901>0<
s/mrof1=901>
snoitpOyalpsiD0.3
25dwF:0
35veR:0
45teN:0
55AffirraT:0
65BffirraT:0
95wolF:0
06yticoleV:0
26emiT/etaD:0
951tamroFetaD:2
tixE:0
stamroFetaD
YYMMDD
DDMMYY
YYDDMM
:etoN emasehtnietadwenaretnE
72/3/1002.g.e,deyalpsidsitisatamrof
lliwti,stigidowtsaderetnesiraeyehtfI
ot0991egnarehtniebotdemussaeb
.evisulcni9802
012 Function 2
CLI Value
Security Access Level
All manuals and user guides at all-guides.com

6
MENU LAYOUT
sseccAmetsyS0.4
842)drowssaP(nigoL:0
942drowssaPegnahC:4
052drowssaPtnerruC:4
152drowssaPweN:4
252drowssaPweNmrifnoC:4
tixE:0
sgnitteSwolF0.5
211stinUwolF:2
511)VRUro%001(DSF:*2
611)VRLro%0(oreZ:2
811)%(ffotuC:*2
73stinUrezilatoT:4
76stinUesluP:2
86tinU/sesluP:2
96.qerFxaMesluP:2
311mrep(stinUlaicepS
3
)s/:2
411emaNwolFlaicepS:2
83mrep(stinUlaicepS
3
):4
93emaNrezilatoTlaicepS:4
tixE:0
esluPdnasrezilatotteN,veR,dwFstceffaylnO*
.tuptuO
stinUwolF rostinUrezilatoT
stinUP/OesluP
laicepSm/laGlaicepS
s/lh/laGl
m/lDGMm
3
h/ltf
3
s/laG
DLMtf
3
m/tf
3
m
3
s/tf
3
h/lM
m
3
m/s/lagU
m
3
h/m/lagU
m
3
d/h/lagU
s/laGDGUM
sgnitteSerusserP0.6
tixE:0
stuptuO0.7
071tuptuO:4
172tuptuO:4
tixE:0
1tuptuO2tuptuO
ffOffO
nOnO
dwFesluPveResluP
R+FesluPdwF
veR
puteSerusserP0.8
noitarbilaCrecudsnarTerusserP )unem(
tixE:0
1.8 noitarbilaCrecudsnarTerusserP
tixE:0
laCwolF0.9
03rotcaFeliforP:4
13rotcaFnoitresnI:4
23)mm(eroBepiPeborP:*4
201edoM:4
652emiTesnopseRwolF:4
52mirTnapSwolF:4
62)ces/mm10.0(mirToreZwolF:4
72etaD.laC:4
82.oN.treC:4
tixE:0
*ehtfiderongisiretemarapsihT
eborpnoitresninatonsirosnes
.)eborPauqA(
lortnoCffiraT0.01
24emiTtratSelcyCyliaD:4
34emiTdnEelcyCyliaD:4
44yaDtratSelcyCylkeeW:4
54yaDdnEelcyCylkeeW:4
64etaDtratSelcyCylraeY:4
74etaDdnEelcyCylraeY:4
04edoM:4
tixE:0
All manuals and user guides at all-guides.com
all-guides.com

7
TARIFF CONTROL
denifeDelcyCylkeeW
edoM
AffiraTBffiraT
1dnekeewgnirudemityaD thgindnayad+dnekeewtaemitthgiN
keewgnirud
2keewgnirudemityaD thgindnayad+keewgnirudemitthgiN
dnekeewgnirud
3semityadllAsemitthginllA
4dnekeewgnirudemitthgiN thgindnayad+dnekeewgnirudemityaD
keewgnirud
5dnekeewgnirudthgindnayaDkeewgnirudthgindnayaD
6gnirudemitthgin+keewgnirudemityaD
dnekeew
gnirudemityad+keewgnirudemitthgiN
dnekeew
7dnekeewgnirudemitthgin+semityadllAkeewgnirudemitthgiN
)enoN=elcyCylkeeW(denifeDelcyCylraeY
edoM
AffiraTBffiraT
1remmusgnirudemityaD thgindnayad+remmusgnirudemitthgiN
retniwgnirud
2retniwgnirudemityaD thgindnayad+retniwgnirudemitthgiN
remmusgnirud
3semityadllAsemitthginllA
4remmusgnirudemitthgiN thgindnayad+remmusgnirudemityaD
retniwgnirud
5remmusgnirudthgindnayaDretniwgnirudthgindnayaD
6gnirudemitthgin+retniwgnirudemityaD
remmus
gnirudemityad+retniwgnirudemitthgiN
remmus
7remmusgnirudemitthgin+semityadllAretniwgnirudemitthgiN
Notes toTariff Control:
The Tariff Control menu is used for defining Tariff A only.
Tariff B is always the opposite of Tariff A.
Daily Cycle Start Time defines the start of normal day time.
Weekly Cycle Start Day defines the first day of the weekend (from 00:00). Weekly Cycle End Day defines
the first day of the week (at 00:00).
[e.g. for a normal weekend (Saturday and Sunday only) set Weekly Cycle Start Day = Saturday and set
Weekly Cycle End Day = Monday]
To use a Yearly Cycle set Weekly Cycle Start Day = None and set Weekly Cycle End Day = None.
Yearly Cycle Start Date defines the day and month of the start of summer. Yearly Cycle End Date defines
the day and month of the start of winter.
All manuals and user guides at all-guides.com

8
SCANREADER OPTION INTERFACE SETTINGS
The ScanReader option interface is factory set and
normally requires no changes. There is no user
interface menu, but changes can be made using
the method described in Changing Selections on
page 4. The notes below define the permitted data
entry values for the various parameters. The
ScanReader options are at security access level 4.
325 Serial Number 4
10 character string. Allowed characters are the
digits 0 to 9 and alphabetics a to z.
Upper case will be transmitted as lower case.
Default setting is 0000000000
This is the serial number that is reported via the
ScanReader interface.
If this is set to 0000000000 the rightmost 9 digits
of the sensor ID number prefixed with a 7 will be
used as the ScanReader serial number.
Invalid characters will be ignored.
326 Adapter Code 4
0 = ScanCoder
1 = AquaMaster
Default setting is 0
Selects the error code capability of the interface.
'0' will provide no error code information.
'1' will provide extended error code information to
enabled Readers.
327 Totaliser Source and Range 4
0 = Fwd x1
1 = Rev x1
2 = Net x1
3 = Fwd x10
4 = Rev x10
5 = Net x10
6 = Fwd x100
7 = Rev x100
8 = Net x100
Default setting is 0
Selects the Totaliser source and resolution range
for the Reader value field. Negative totals will be
reported as 0.
ScanReader interface only has 6 digits defined for
Totaliser value. Range setting defines how the 6
digits are used. For example, for range x100, a
total of 12345678 would be conveyed to the
Reader as 123456.
All manuals and user guides at all-guides.com