ABB Relion 615 series User manual

—
RELION® 615 SERIES
Transformer Protection and Control
RET615
Product Guide

Contents
1. Description..................................................................... 3
2. Standard configurations................................................. 3
3. Protection functions......................................................14
4. Application................................................................... 15
5. Supported ABB solutions............................................. 18
6. Control......................................................................... 19
7. Measurements............................................................. 20
8. Disturbance recorder....................................................20
9. Event log...................................................................... 20
10. Recorded data............................................................ 20
11. Condition monitoring .................................................. 21
12. Trip-circuit supervision.................................................21
13. Self-supervision...........................................................21
14. Fuse failure supervision............................................... 22
15. Access control............................................................ 22
16. Inputs and outputs...................................................... 22
17. Station communication................................................22
18. Technical data.............................................................28
19. Local HMI....................................................................51
20. Mounting methods...................................................... 52
21. Relay case and plug-in unit......................................... 52
22. Selection and ordering data.........................................52
23. Accessories and ordering data.................................... 53
24. Tools...........................................................................54
25. Cyber security............................................................. 55
26. Terminal diagrams.......................................................56
27. Certificates.................................................................. 58
28. References..................................................................58
29. Functions, codes and symbols.................................... 59
30. Document revision history........................................... 62
Disclaimer
The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors
that may appear in this document.
© Copyright 2018 ABB.
All rights reserved.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or product names mentioned in this document may be trademarks or registered trademarks
of their respective holders.
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1
2 ABB

1. Description
RET615 is a dedicated transformer protection and control relay
for power transformers, unit and step-up transformers including
power generator-transformer blocks in utility and industry
power distribution systems. RET615 is a member of ABB’s
Relion® product family and part of its 615 protection and
control product series. The 615 series relays are characterized
by their compactness and withdrawable-unit design.
Re-engineered from the ground up, the 615 series has been
designed to unleash the full potential of the IEC 61850 standard
for communication and interoperability between substation
automation devices. Once the standard configuration relay has
been given the application-specific settings, it can directly be
put into service.
The 615 series relays support a range of communication
protocols including IEC 61850 with Edition 2 support, process
bus according to IEC 61850-9-2 LE, IEC 60870-5-103,
Modbus® and DNP3. Profibus DPV1 communication protocol is
supported by using the protocol converter SPA-ZC 302.
2. Standard configurations
RET615 is available with eight alternative standard
configurations. The standard signal configuration can be
altered by means of the signal matrix or the graphical
application functionality of the Protection and Control IED
Manager PCM600. Further, the application configuration
functionality of PCM600 supports the creation of multi-layer
logic functions utilizing various logical elements including timers
and flip-flops. By combining protection functions with logic
function blocks the relay configuration can be adapted to user
specific application requirements.
The relay is delivered from the factory with default connections
described in the functional diagrams for binary inputs, binary
outputs, function-to-function connections and alarm LEDs.
Some of the supported functions in RET615 must be added
with the Application Configuration tool to be available in the
Signal Matrix tool and in the relay. The positive measuring
direction of directional protection functions is towards the
outgoing feeder.
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1 Issued: 2018-12-20
Revision: M
ABB 3

Master trip
Lockout relay
94/86
Master Trip
Lockout relay
94/86
3×
2×
6
×R
TD
2
×mA
CONDITION MONITORING
AND SUPERVISION
ALSO AVAILABLE
- Disturbance and fault recorders
- Event log and recorded data
- High-Speed Output module (optional)
- Local/Remote push button on LHMI
- Self-supervision
- Time synchronization: IEEE 1588 v2,
SNTP, IRIG-B
- User management
- Web HMI
CONTROL AND INDICATION 1) MEASUREMENT
TRANSFORMER PROTECTION AND CONTROL RELAY
PROTECTION LOCAL HMI
Object Ctrl 2) Ind 3)
CB
DC
ES
1) Check availability of binary inputs/outputs
from technical documentation
2) Control and indication function for
primary object
3) Status indication function for
primary object
1 -
2 3
1 2
STANDARD
CONFIGURATION
REMARKS
Optional
function
No. of
instances
Alternative
function to be
defined when
ordering
OR
Io/Uo
Calculated
value
3×
R
L
ClearESC
I
O
Configuration A
System
HMI
Time
Authorization
R
L
ClearESC
I
O
U12 0. 0 kV
P 0.00 kW
Q 0.00 kVAr
IL2 0 A
A
COMMUNICATION
P
rotocols:
IEC 61850-8-1
Modbus®
IEC 60870-5-103
DNP3
Interfaces:
Ethernet: TX (RJ45), FX (LC)
Serial: Serial glass fiber (ST),
RS-485, RS-232
Redundant p
rotocols:
HSR
PRP
RSTP
RET615
OR
AND
- HV side: I, Io
- LV side: I
- Limit value supervision
- Load profile record
- RTD/mA measurement, optional
- Symmetrical components
Analog interface types 1)
Current transformer
1) Conventional transformer inputs
Voltage transformer
7
-
A
I2>
46
3I>>>
50P/51P
3I>/Io>BF
51BF/51NBF
3I>
51P-1
3I>>
51P-2
3dI>T
87T
I2>
46
3×
ARC
50L/50NL
2×
TCS
TCM
CBCM
CBCM
OPTS
OPTM
3I>>
51P-2
3I>>>
50P/51P
3I>
51P-1
Io>
51N-1
Io>>
51N-2
dIoLo>
87NL
18×
MAP
MAP
TPOSM
84M
Io (HV)
Io
Io
3I (LV)
3×
3I (HV)
3Ith>T/G/C
49T/G/C
GUID-C90DE25B-AEC6-4542-8FC8-F4604ACDB769 V2 EN
Figure 1. Functionality overview for standard configuration A
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1
4 ABB

Master trip
Lockout relay
94/86
Master Trip
Lockout relay
94/86
3×
2×
CONDITION MONITORING
AND SUPERVISION
ALSO AVAILABLE
- Disturbance and fault recorders
- Event log and recorded data
- High-Speed Output module (optional)
- Local/Remote push button on LHMI
- Self-supervision
- Time synchronization: IEEE 1588 v2,
SNTP, IRIG-B
- User management
- Web HMI
CONTROL AND INDICATION 1) MEASUREMENT
TRANSFORMER PROTECTION AND CONTROL RELAY
PROTECTION LOCAL HMI
Object Ctrl 2) Ind 3)
CB
DC
ES
1) Check availability of binary inputs/outputs
from technical documentation
2) Control and indication function for
primary object
3) Status indication function for
primary object
1 -
2 3
1 2
STANDARD
CONFIGURATION
REMARKS
Optional
function
No. of
instances
Alternative
function to be
defined when
ordering
OR
Io/Uo
Calculated
value
3×
R
L
ClearESC
I
O
Configuration A
System
HMI
Time
Authorization
R
L
ClearESC
I
O
U12 0. 0 kV
P 0.00 kW
Q 0.00 kVAr
IL2 0 A
A
COMMUNICATION
P
rotocols:
IEC 61850-8-1
Modbus®
IEC 60870-5-103
DNP3
Interfaces:
Ethernet: TX (RJ45), FX (LC)
Serial: Serial glass fiber (ST),
RS-485, RS-232
Redundant p
rotocols:
HSR
PRP
RSTP
RET615
OR
AND
- HV side: I
- LV side: I, Io
- Limit value supervision
- Load profile record
- RTD/mA measurement, optional
- Symmetrical components
B
Analog interface types 1)
Current transformer
1) Conventional transformer inputs
Voltage transformer
7
-
I2>
46
3I>>>
50P/51P
3I>/Io>BF
51BF/51NBF
3I>
51P-1
3I>>
51P-2
3dI>T
87T
I2>
46
3×
ARC
50L/50NL
2×
TCS
TCM
CBCM
CBCM
OPTS
OPTM
3I>>
51P-2
3I>>>
50P/51P
3I>
51P-1
Io>
51N-1
Io>>
51N-2
dIoLo>
87NL
18×
MAP
MAP
3Ith>T/G/C
49T/G/C
Io
Io
Io (LV)
TPOSM
84M
6×RTD
2
×mA
3×
3I (HV)
3I (LV)
GUID-C948BC5D-9075-4336-86FC-B8C3F7BA5BAB V2 EN
Figure 2. Functionality overview for standard configuration B
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1
ABB 5

Master trip
Lockout relay
94/86
Master Trip
Lockout relay
94/86
3×
2×
CONDITION MONITORING
AND SUPERVISION
ALSO AVAILABLE
- Disturbance and fault recorders
- Event log and recorded data
- High-Speed Output module (optional)
- Local/Remote push button on LHMI
- Self-supervision
- Time synchronization: IEEE 1588 v2,
SNTP, IRIG-B
- User management
- Web HMI
CONTROL AND INDICATION 1) MEASUREMENT
TRANSFORMER PROTECTION AND CONTROL RELAY
PROTECTION LOCAL HMI
Object Ctrl 2) Ind 3)
CB
DC
ES
1) Check availability of binary inputs/outputs
from technical documentation
2) Control and indication function for
primary object
3) Status indication function for
primary object
1 -
2 3
1 2
STANDARD
CONFIGURATION
REMARKS
Optional
function
No. of
instances
Alternative
function to be
defined when
ordering
OR
Io/Uo
Calculated
value
3×
R
L
ClearESC
I
O
Configuration A
System
HMI
Time
Authorization
R
L
ClearESC
I
O
U12 0. 0 kV
P 0.00 kW
Q 0.00 kVAr
IL2 0 A
A
COMMUNICATION
P
rotocols:
IEC 61850-8-1
Modbus®
IEC 60870-5-103
DNP3
Interfaces:
Ethernet: TX (RJ45), FX (LC)
Serial: Serial glass fiber (ST),
RS-485, RS-232
Redundant p
rotocols:
HSR
PRP
RSTP
RET615
OR
AND
- HV side: I, Io
- LV side: I
- Limit value supervision
- Load profile record
- RTD/mA measurement, optional
- Symmetrical components
Analog interface types 1)
Current transformer
1) Conventional transformer inputs
Voltage transformer
7
-
C
3Ith>T/G/C
49T/G/C
I2>
46
3I>>>
50P/51P
3I>/Io>BF
51BF/51NBF
3I>
51P-1
3I>>
51P-2
3dI>T
87T
2×
TCS
TCM
CBCM
CBCM
OPTS
OPTM
Io>
51N-1
Io>>
51N-2
18×
MAP
MAP
dIoHi>
87NH
I2>
46
3×
ARC
50L/50NL
3I>>
51P-2
3I>>>
50P/51P
3I>
51P-1
TPOSM
84M
3I (HV)
3I (LV)
Io
Io (HV)
Io
6
×R
TD
2
×mA
3×
GUID-F8F3319F-B60D-47EF-A940-0891BC683D6C V2 EN
Figure 3. Functionality overview for standard configuration C
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1
6 ABB

6×RTD
2
×mA
Master trip
Lockout relay
94/86
CONDITION MONITORING
AND SUPERVISION
ALSO AVAILABLE
- Disturbance and fault recorders
- Event log and recorded data
- High-Speed Output module (optional)
- Local/Remote push button on LHMI
- Self-supervision
- Time synchronization: IEEE 1588 v2,
SNTP, IRIG-B
- User management
- Web HMI
CONTROL AND INDICATION 1) MEASUREMENT
TRANSFORMER PROTECTION AND CONTROL RELAY
PROTECTION LOCAL HMI
Object Ctrl 2) Ind 3)
CB
DC
ES
1) Check availability of binary inputs/outputs
from technical documentation
2) Control and indication function for
primary object
3) Status indication function for
primary object
1 -
2 3
1 2
STANDARD
CONFIGURATION
REMARKS
Optional
function
No. of
instances
Alternative
function to be
defined when
ordering
OR
Io/Uo
Calculated
value
3×
R
L
ClearESC
I
O
Configuration A
System
HMI
Time
Authorization
R
L
ClearESC
I
O
U12 0. 0 kV
P 0.00 kW
Q 0.00 kVAr
IL2 0 A
A
COMMUNICATION
P
rotocols:
IEC 61850-8-1
Modbus®
IEC 60870-5-103
DNP3
Interfaces:
Ethernet: TX (RJ45), FX (LC)
Serial: Serial glass fiber (ST),
RS-485, RS-232
Redundant p
rotocols:
HSR
PRP
RSTP
RET615
OR
AND
- HV side: I
- LV side: I, Io
- Limit value supervision
- Load profile record
- RTD/mA measurement, optional
- Symmetrical components
D
Analog interface types 1)
Current transformer
1) Conventional transformer inputs
Voltage transformer
7
-
3Ith>T/G/C
49T/G/C
I2>
46
3I>>>
50P/51P
3I>/Io>BF
51BF/51NBF
3I>
51P-1
3I>>
51P-2
3dI>T
87T
I2>
46
3×
ARC
50L/50NL
2×
TCS
TCM
CBCM
CBCM
OPTS
OPTM
3I>>
51P-2
3I>>>
50P/51P
3I>
51P-1
Io>
51N-1
Io>>
51N-2
dIoHi>
87NH
18×
MAP
MAP
TPOSM
84M
3I (HV)
3I (LV)
Io (LV)
Io
3×
Io
Master Trip
Lockout relay
94/86
3×
2×
GUID-422AE187-3E2A-4A20-BBE2-2B8A840DC1FA V2 EN
Figure 4. Functionality overview for standard configuration D
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1
ABB 7

Master trip
Lockout relay
94/86
2x
RTD
1xmA
CONDITION MONITORING
AND SUPERVISION
ALSO AVAILABLE
- Disturbance and fault recorders
- Event log and recorded data
- High-Speed Output module (optional)
- Local/Remote push button on LHMI
- Self-supervision
- Time synchronization: IEEE 1588 v2,
SNTP, IRIG-B
- User management
- Web HMI
OR
AND
CONTROL AND INDICATION 1) MEASUREMENT
TRANSFORMER PROTECTION AND CONTROL RELAY
PROTECTION LOCAL HMI
Object Ctrl 2) Ind 3)
CB
DC
ES
1) Check availability of binary inputs/outputs
from technical documentation
2) Control and indication function for
primary object
3) Status indication function for
primary object
1 -
2 3
1 2
STANDARD
CONFIGURATION
REMARKS
Optional
function
No. of
instances
Alternative
function to be
defined when
ordering
OR
Io/Uo
Calculated
value
3×
R
L
ClearESC
I
O
Configuration A
System
HMI
Time
Authorization
R
L
ClearESC
I
O
U12 0. 0 kV
P 0.00 kW
Q 0.00 kVAr
IL2 0 A
A
COMMUNICATION
P
rotocols:
IEC 61850-8-1/9-2LE
Modbus®
IEC 60870-5-103
DNP3
Interfaces:
Ethernet: TX (RJ45), FX (LC)
Serial: Serial glass fiber (ST),
RS-485, RS-232
Redundant p
rotocols:
HSR
PRP
RSTP
RET615 E
7
5
Analog interface types
1)
Cur
rent transformer
1)
Conventional transformer inputs
V
oltage transformer 2)
2) One of the five inputs is reserved for future
applications
- HV side: I, Io, U, Uo, P, Q, E, pf, f
- LV side: I
- Limit value supervision
- Load profile record
- RTD/mA measurement, optional
- Symmetrical components
3Ith>T/G/C
49T/G/C
I2>
46
3I>>>
50P/51P
3I>/Io>BF
51BF/51NBF
3I>
51P-1
3I>>
51P-2
3dI>T
87T
I2>
46
3×
ARC
50L/50NL
2×
TCS
TCM
CBCM
CBCM
OPTS
OPTM
3I>>
51P-2
3I>>>
50P/51P
3I>
51P-1
Io>
51N-1
Io>>
51N-2
dIoLo>
87NL
2×
3U<
27
2×
Uo>
59G
FUSEF
60
18×
MAP
MAP
3I (LV)
2×
3U>
59
UL1UL2UL3
UL1UL2UL3
Uo
Uo
Io
Io
Io (HV)
UL1UL2UL3
TPOSM
84M
3×
3I (HV)
3I (HV)
Master Trip
Lockout relay
94/86
3×
2×
GUID-DC590CA4-DF86-499D-8B77-3DE0CB2997F0 V2 EN
Figure 5. Functionality overview for standard configuration E
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1
8 ABB

Master trip
Lockout relay
94/86
2×RTD
1
×mA CONDITION MONITORING
AND SUPERVISION
ALSO AVAILABLE
- Disturbance and fault recorders
- Event log and recorded data
- High-Speed Output module (optional)
- Local/Remote push button on LHMI
- Self-supervision
- Time synchronization: IEEE 1588 v2,
SNTP, IRIG-B
- User management
- Web HMI
OR
AND
CONTROL AND INDICATION 1) MEASUREMENT
TRANSFORMER PROTECTION AND CONTROL RELAY
PROTECTION LOCAL HMI
Object Ctrl 2) Ind 3)
CB
DC
ES
1) Check availability of binary inputs/outputs
from technical documentation
2) Control and indication function for
primary object
3) Status indication function for
primary object
1 -
2 3
1 2
STANDARD
CONFIGURATION
REMARKS
Optional
function
No. of
instances
Alternative
function to be
defined when
ordering
OR
Io/Uo
Calculated
value
3×
R
L
ClearESC
I
O
Configuration A
System
HMI
Time
Authorization
R
L
ClearESC
I
O
U12 0. 0 kV
P 0.00 kW
Q 0.00 kVAr
IL2 0 A
A
COMMUNICATION
P
rotocols:
IEC 61850-8-1/9-2LE
Modbus®
IEC 60870-5-103
DNP3
Interfaces:
Ethernet: TX (RJ45), FX (LC)
Serial: Serial glass fiber (ST),
RS-485, RS-232
Redundant p
rotocols:
HSR
PRP
RSTP
RET615 F
7
5
Analog interface types
1)
Cur
rent transformer
1)
Conventional transformer inputs
V
oltage transformer 2)
2) One of the five inputs is reserved for future
applications
- HV side: I, U, Uo, P, Q, E, pf, f
- LV side: I, Io
- Limit value supervision
- Load profile record
- RTD/mA measurement, optional
- Symmetrical components
3Ith>T/G/C
49T/G/C
I2>
46
3I>>>
50P/51P
3I>/Io>BF
51BF/51NBF
3I>
51P-1
3I>>
51P-2
3dI>T
87T
I2>
46
3×
ARC
50L/50NL
3I>>
51P-2
3I>>>
50P/51P
3I>
51P-1
2×
3U<
27
2×
Uo>
59G
2×
TCS
TCM
CBCM
CBCM
OPTS
OPTM
FUSEF
60
2×
3U>
59
TPOSM
84M
Io>
51N-1
Io>>
51N-2
dIoLo>
87NL
18×
MAP
MAP
3I (LV)
UL1UL2UL3
Uo
3I (HV)
UL1UL2UL3
Io (LV)
Io
3×
3I (HV)
Io
UL1UL2UL3
Uo
Master Trip
Lockout relay
94/86
3×
2×
GUID-7F2F76A7-E9D6-4845-8A56-42144178898C V2 EN
Figure 6. Functionality overview for standard configuration F
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1
ABB 9

Master trip
Lockout relay
94/86
CONDITION MONITORING
AND SUPERVISION
ALSO AVAILABLE
- Disturbance and fault recorders
- Event log and recorded data
- High-Speed Output module (optional)
- Local/Remote push button on LHMI
- Self-supervision
- Time synchronization: IEEE 1588 v2,
SNTP, IRIG-B
- User management
- Web HMI
OR
AND
CONTROL AND INDICATION 1) MEASUREMENT
TRANSFORMER PROTECTION AND CONTROL RELAY
PROTECTION LOCAL HMI
Object Ctrl 2) Ind 3)
CB
DC
ES
1) Check availability of binary inputs/outputs
from technical documentation
2) Control and indication function for
primary object
3) Status indication function for
primary object
1 -
2 3
1 2
STANDARD
CONFIGURATION
REMARKS
Optional
function
No. of
instances
Alternative
function to be
defined when
ordering
OR
Io/Uo
Calculated
value
3×
R
L
ClearESC
I
O
Configuration A
System
HMI
Time
Authorization
R
L
ClearESC
I
O
U12 0. 0 kV
P 0.00 kW
Q 0.00 kVAr
IL2 0 A
A
COMMUNICATION
P
rotocols:
IEC 61850-8-1/9-2LE
Modbus®
IEC 60870-5-103
DNP3
Interfaces:
Ethernet: TX (RJ45), FX (LC)
Serial: Serial glass fiber (ST),
RS-485, RS-232
Redundant p
rotocols:
HSR
PRP
RSTP
RET615 G
Analog interface types 1)
Current transformer
1) Conventional transformer inputs
Voltage transformer
7
5
- HV side: I, Io, U, Uo, P, Q, E, pf, f
- LV side: I
- Limit value supervision
- Load profile record
- RTD/mA measurement, optional
- Symmetrical components
3Ith>T/G/C
49T/G/C
I2>
46
3I>>>
50P/51P
3I>/Io>BF
51BF/51NBF
3I>
51P-1
3I>>
51P-2
3dI>T
87T
I2>
46
3×
ARC
50L/50NL
3I>>
51P-2
3I>>>
50P/51P
3I>
51P-1
Io>
51N-1
Io>>
51N-2
2×
3U<
27
2×
Uo>
59G
dIoHi>
87NH
2×
TCS
TCM
CBCM
CBCM
OPTS
OPTM
FUSEF
60
2×
3U>
59
TPOSM
84M
3I (LV)
Io
Io
3×
3I (HV)
3I (HV)
18×
MAP
MAP
2x
RTD
1xmA
Io (HV)
UL1UL2UL3
Uo
Uo
UL1UL2UL3
UL1UL2UL3
Master Trip
Lockout relay
94/86
3×
2×
GUID-D133822F-DB95-4CF6-B971-9D67054A5731 V2 EN
Figure 7. Functionality overview for standard configuration G
Transformer Protection and Control
1MRS756891 M
RET615
Product version: 5.0 FP1
10 ABB