ADF Web HD67B27-B2 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 1 of 27
User Manual
Revision 1.
English
OPC UA Server / Modbus Master -
Converter
(Order Code: HD67B27-B2)
for Website information:
http://www.adfweb.com/?Product=HD67B27
for Price information:
http://www.adfweb.com/?Price=HD67B27-B2
Benefits and Main Features:
Triple electrical isolation
Power Supply 18…35V DC and 8…24 V AC
Temperature range: -4 °C/+85°C (-4 °F/+185°F)
For others OPC UA Server devices, see also the following links:
OPC UA Server from/to …
www.adfweb.com?Product=HD67B26 (Serial)
www.adfweb.com?Product=HD67B28 (Modbus Slave)
www.adfweb.com?Product=HD67B29 (Modbus TCP Master)
www.adfweb.com?Product=HD67B3 (Modbus TCP Slave)
www.adfweb.com?Product=HD67B31 (Bacnet Master)
www.adfweb.com?Product=HD67B32 (Bacnet Slave)
www.adfweb.com?Product=HD67B33 (CA )
www.adfweb.com?Product=HD67B34 (CA open)
www.adfweb.com?Product=HD67B35 (Device et Master)
www.adfweb.com?Product=HD67B36 (Device et Slave)
www.adfweb.com?Product=HD67B37 (DMX)
www.adfweb.com?Product=HD67B38 (Ether et/IP Master)
www.adfweb.com?Product=HD67B39 (Ether et/IP Slave)
www.adfweb.com?Product=HD67B4 (J1939)
www.adfweb.com?Product=HD67B41 (K X)
www.adfweb.com?Product=HD67B42 (MQTT)
www.adfweb.com?Product=HD67B43 ( MEA0183)
www.adfweb.com?Product=HD67B44 ( MEA2000)
www.adfweb.com?Product=HD67B45 (PROFI ET Master)
www.adfweb.com?Product=HD67B46 (PROFI ET Slave)
www.adfweb.com?Product=HD67B47 (S MP Manager)
www.adfweb.com?Product=HD67B48 (S MP Agent)
Do you have an your customer protocol?
See the following links:
www.adfweb.com?Product=HD67 3
Do you need to choose a device? do you want help?
Ask it to the following link:
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 2 of 27
I DEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 7
CONFIGURATION 7
POWER SUPPLY 8
FUNCTION MODES 9
LEDS 1
RS232 11
RS485 12
ETHERNET 13
USE OF COMPOSITOR SW67B27 14
NEW CONFIGURATION / OPEN CONFIGURATION 15
SOFTWARE OPTIONS 16
SET COMMUNICATION 18
OPC UA ACCESS 19
MODBUS SET ACCESS 2
UPDATE DEVICE 22
MECHANICAL DIMENSIONS 24
ORDERING INFORMATIONS 25
ACCESSORIES 25
DISCLAIMER 26
OTHER REGULATIONS AND STANDARDS 26
WARRANTIES AND TECHNICAL SUPPORT 27
RETURN POLICY 27
Pagina 2 di 27
UPDATED DOCUME TATIO :
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISIO LIST:
Revision Date Author Chapter Description
1. 13/ 3/2 19 Nv All First release version
WAR I G:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 3 of 27
SECURITY ALERT:
G E ERAL I FORMATIO
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I TE DED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSO EL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CO FORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 4 of 27
EXAMPLE OF CO ECTIO :

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 5 of 27
CO ECTIO SCHEME:
Figure
1
a
: Connection
scheme
for HD67
B27
-
2
-
B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 6 of 27
Figure
1
b
: Connection
scheme
for HD67
B27
-
5
-
B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 7 of 27
CHARACTERISTICS:
The HD67B27-B2 is a OPC UA Server / Modbus Master converter.
It allows the following characteristics:
Up to 15 bytes in reading and 15 bytes in writing;
Two-directional information between Modbus bus and OPC UA bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -4 °C / 85°C [-4 °F / +185°F].
CO FIGURATIO :
You need Compositor SW67B27 software on your PC in order to perform the following:
Define the parameter of OPC UA line;
Define the parameter of Modbus line;
Update the device.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 8 of 27
POWER SUPPLY:
The devices can be powered between a wide range of tensions. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
HD67B27-B2 8V 24V 12V 35V
Consumption at 24V DC:
Device W/VA
HD67B27-B2 4
Caution: ot reverse the polarity power
HD67B27-B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 9 of 27
FU CTIO MODES:
The device has got two functions mode depending of the position of the Dip1 of ‘Dip-Switch A’:
The first, with Dip1 in Off position (factory setting), is used for the normal working of the device.
The second, with Dip1 in On position, is used for upload the Project/Firmware.
For the operations to follow for the updating (see ‘UPDATE DEVICE’ section).
According to the functioning mode, the LEDs will have specifics functions (see ‘LEDS’ section).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 1 of 27
LEDS:
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED ormal Mode Boot Mode
1: Device State (green) Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
2: Modbus comm. (yellow) Flashing: Modbus response
OFF: No Modbus response
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: OPC UA comm. (yellow) Flashing: OPC UA request
OFF: No OPC UA request
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: OPC UA error (yellow) O : An error has occurred
OFF: The device is correctly running
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Link Ethernet (green) O : Ethernet cable connected
OFF: Ethernet cable disconnected
O : Ethernet cable connected
OFF: Ethernet cable disconnected

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 11 of 27
RS232:
The connection from RS232 socket to a serial port (example one from a personal computer)
must be made with a Null Modem cable (a serial cable where the pins 2 and 3 are crossed).
It is recommended that the RS232 cable not exceed 15 meters.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 12 of 27
RS485:
For terminate the RS485 line with a 12 Ω resistor it is necessary to put ON dip 1, like in figure.
The maximum length of the cable should be 12 m (4 feet).
Here some codes of cables:
Belden: p/n 8132 - 2x 28AWG stranded twisted pairs conductor + foil shield + braid shield;
Belden p/n 82842 - 2x 24AWG stranded twisted pairs conductor + foil shield + braid shield;
Tasker: p/n C521 - 1x 24AWG twisted pair conductor + foil shield + braid shield;
Tasker: p/n C522 - 2x 24AWG twisted pairs conductor + foil shield + braid shield.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 13 of 27
ETHER ET:
The Ethernet connection must be made using Connector3 of HD67B27-x-B2 with at least a Category 5E cable. The maximum length of the
cable should not exceed 1 m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 1 Mbps. To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of a
cross cable.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 14 of 27
USE OF COMPOSITOR SW67B27:
To configure the Converter, use the available software that runs with Windows called SW67B27. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 1 ; 32/64bit).
When launching the SW67B27, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67B27

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 15 of 27
EW CO FIGURATIO / OPE CO FIGURATIO :
The “ ew Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “OPC UA Server / Modbus Master -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the button
“Open Configuration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 16 of 27
SOFTWARE OPTIO S:
By pressing the “Settings” ( ) button there is the possibility to change the
language of the software and check the updatings for the compositor.
In the section “Language” it is possible to change the language of the software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67B27 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 17 of 27
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in the
different sections of the software.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 18 of 27
SET COMMU ICATIO :
This section define the fundamental communication parameters of two buses, OPC UA Server
and Modbus.
By Pressing the “Set Communication” button from the main window for SW67B27 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “OPC UA Server” are:
In the field “IP Address” the IP address for OPC UA side of the converter is defined;
In the field “Sub et Mask” the SubNet Mask for OPC UA side of the converter is
defined;
In the field “Gateway” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of
the net;
In the field “D S” the IP Address of the DNS server is defined. This feature can be
enabled or disabled pressing the Check Box field;
In the field “Port” the port of OPC UA Server is defined.
The means of the fields for “Modbus Master” are:
In the field “Serial” the serial port to use is defined (RS232 or RS485);
In the field “Baudrate” the baudrate for the serial line is defined;
In the field “Parity” the parity of the serial line is defined;
In the field “Stop Bits” the number of Stop Bits of the serial line is defined;
In the field “TimeOut (ms)” the maximum time that the converter attends for the
answer from the Slave interrogated is defined;
In the field “Cyclic Delay (ms)” the delay (idle time) between two Modbus requests
is defined.
The means of the fields for “NTP (Network Time Protocol)” are:
In the field “Server URL” the URL or the IP Address of the NTP Server is defined;
In the field “Poll Time (seconds)” the polling time for the time synchronization is defined.
Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 19 of 27
Figure 4: “
O C UA Server Access
” window
OPC UA ACCESS:
By Pressing the “OPC UA Access” button from the main window for SW67B27 (Fig. 2) the window “OPC UA Server Access” appears (Fig. 4).
This section is used to define the list of OPC UA variables to read/write.
The means of the checkboxes inside the table are:
In the field “Type” the data format of the OPC UA variable is defined;
In the field “Position” the starting byte of the internal memory arrays where getting the value is defined;
In the field “Length” the byte length of the OPC UA variable is defined;
In the field “ ame” the name of the OPC UA variable is defined;
In the field “R/W” the access type of the OPC UA variable is defined;
In the field “Mnemonic” a description of the OPC UA variable is defined.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
OPC UA Server /
Modbus Master
Document code: MN67B27_ENG Revision 1. Page 2 of 27
MODBUS SET ACCESS:
By pressing the “Modbus Set Access” button from the main window for SW67B27 (Fig. 2) the window “Set Modbus Access” appears.
This window is divided in two parts, the "Modbus Read" (Fig. 5a) and the "Modbus Write " (Fig. 5b).
The "Modbus Read" part is used to read the data from the Modbus slaves and make them available on OPC UA side.
The "Modbus Write" part is used to write the data that arrives from OPC UA side to the Modbus slaves.
M ODBUS R EAD
The means of the fields are:
If the field “Enable” is checked, the
Modbus request is enabled;
In the field “Slave ID” the address of the
Modbus device to read is defined;
In the field “Type” the data type of the
register to read is defined. It is possible to
choose between the following:
oCoil Status;
oInput Status
oHolding Register;
oInput Register.
In the field “Address” the starting address of the register to be read is defined;
In the field “ Point” the number of consecutive registers to be read is defined;
In the field “Poll Time” the delay time to make the request is defined;
In the field “Max Error” the number of consecutive errors that the converter waits before suspending the request until the next
reboot is defined. If is set to ‘ ’ this function is disabled;
In the field “Position” the address of the internal array where placing the information is defined;
In the field “Start Bit” the starting bit of the first byte of the field “Position” is defined;
If the field “Swap” is checked, the bytes of the Modbus registers are swapped;
If the field “SwapWord” is checked, the words of the 32 bit values are swapped;
In the field “Mnemonic” the description for the request is defined.
Figure 5a: “Set Access  Modbus Read”