ADF Web HD67667-2-A1 User manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 1 of 30
User Manual
Revision 1.000
En lish
EtherNet/IP Master / Serial - Converter
(Order Code: HD67667-2-A1, HD67667-4-A1, HD67667-5-A1 )
For Website information:
www.adfweb.com?Product=HD67667
For Price information:
www.adfweb.com?Price=HD67667-2-A1
www.adfweb.com?Price=HD67667-4-A1
www.adfweb.com?Price=HD67667-5-A1
Benefits and Main Features:
Very easy to confi ure
Triple Electrical isolation
Temperature ran e: -40°C/+85°C (-40°F/+185°F)
For other EtherNet/IP Master products see also the followin link:
Converter EtherNet/IP Master to
www.adfweb.com?Product=HD67B38 (OPC UA Server
www.adfweb.com?Product=HD67D24 (LoRaWAN
www.adfweb.com?Product=HD67E26 (EtherCAT
www.adfweb.com?Product=HD67158 (SNMP Agent
www.adfweb.com?Product=HD67643 (PROFIBUS Slave
www.adfweb.com?Product=HD67645 (CAN
www.adfweb.com?Product=HD67646 (CANopen
www.adfweb.com?Product=HD67647 (DeviceNet Slave
www.adfweb.com?Product=HD67661 (PROFINET
www.adfweb.com?Product=HD67665 (Modbus TCP Slave
www.adfweb.com?Product=HD67667 (Serial
www.adfweb.com?Product=HD67668 (Ethernet
www.adfweb.com?Product=HD67669 (Modbus Slave
www.adfweb.com?Product=HD67689 (BACnet Slave
www.adfweb.com?Product=HD67743 (IEC 61850 Server
www.adfweb.com?Product=HD67806 (KNX
www.adfweb.com?Product=HD67955 (MQTT
www.adfweb.com?Product=HD67973 (IO-Link Slave
User Manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 2 of 30
INDEX:
Pa e
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 8
CONFIGURATION 8
POWER SUPPLY 9
FUNCTION MODES 10
LEDS 11
RS485 12
RS422 13
RS232 14
ETHERNET 15
USE OF COMPOSITOR SW67667 16
NEW CONFIGURATION / OPEN CONFIGURATION 17
SOFTWARE OPTIONS 18
SET COMMUNICATION 20
ETHERNET/IP ACCESS 21
UPDATE DEVICE 22
SERIAL PROTOCOL 24
MECHANICAL DIMENSIONS 27
ORDERING INFORMATIONS 28
ACCESSORIES 28
DISCLAIMER 29
OTHER REGULATIONS AND STANDARDS 29
WARRANTIES AND TECHNICAL SUPPORT 30
RETURN POLICY 30
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the followin document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top ri ht-hand corner of each pa e of this document.
With this “Document Code” o to web pa e www.adfweb.com/download/
and search for the correspondin code on the pa e. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
WARNING:
ADFweb.com reserves the ri ht to chan e information in this manual about
our product without warnin .
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belon to their respective
owners.
Revision Date Author Chapter Description
1.000 18/09/2020 VDB All First Release

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 3 of 30
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated accordin to the instructions in the manual. When usin the device, le al and
safety re ulation are required for each individual application. The same applies also when usin accessories.
I NTENDED U SE
Machines and systems must be desi ned so the faulty conditions do not lead to a dan erous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissionin and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the followin symbol:
This symbol indicates that non-observance of the safety instructions is a dan er for people that could lead to serious injury or
death and / or the possibility of dama e.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or ive us a call if you need it.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 4 of 30
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 5 of 30
CONNECTION SCHEME:
Figure 1a: Connection scheme for HD67667-2-A1

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 6 of 30
Figure 1b: Connection scheme for HD67667- -A1

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 7 of 30
Figure 1c: Connection scheme for HD67667-5-A1

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 8 of 30
CHARACTERISTICS:
The HD67667-A1 are EtherNet/IP Master / Serial - Converters.
It allows for the followin characteristics:
Isolation between EtherNet/IP – Serial – Power Supply;
Two-directional information between EtherNet/IP bus and Serial bus;
Mountable on 35mm Rail DIN;
Wide power supply input ran e: 8…24V AC or 12…35V DC;
Wide temperature ran e: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67667 software on your PC in order to perform the followin :
Define the parameters of EtherNet/IP line;
Define the parameters of Serial line;
Define the list of EtherNet/IP slaves connected to the converter;
Update the device.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 9 of 30
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67667-x-A1 3.5
HD67667-x-A1
Caution:
Do n
ot reverse the polarity power

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 10 of 30
FUNCTION MODES:
The device has ot two function modes dependin on the position of the ‘Dip1 of Dip-Switch A’:
The first, with ‘Dip1 of Dip-Switch A’ at “OFF” position, is used for the normal workin of the device.
The second, with ‘Dip1 of Dip-Switch A’ at “ON” position, is used for uploadin the Project and/or Firmware.
For the operations to follow for the updatin , see ‘UPDATE DEVICE’ section.
Accordin to the functionin mode, the LEDs will have specific functions, see ‘LEDS’ section.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 11 of 30
LEDS:
The device has ot seven LEDs that are used to ive information about the functionin status.
The various meanin s of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON ( reen) ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: Serial comm. ( reen) It blinks when a Serial messa e is received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in pro ress
3: Device State ( reen) Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in pro ress
4: Ethernet comm. ( reen) It blinks when EtherNet/IP communication is runnin Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in pro ress
5: Ethernet1 link ( reen) ON: Ethernet cable connected
OFF: Ethernet cable disconnected
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
6: Ethernet2 link ( reen) ON: Ethernet cable connected
OFF: Ethernet cable disconnected
ON: Ethernet cable connected
OFF: Ethernet cable disconnected

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 12 of 30
RS485:
For terminate the RS485 line with a 220Ω resistor it is necessary to put ON dip 1, like in fi ure.
The maximum len th of the cable should be 1200m (4000 feet).
Here some codes of cables:
Belden: p/n 8132 - 2x 28AWG stranded twisted pairs conductor + foil shield + braid shield;
Belden p/n 82842 - 2x 24AWG stranded twisted pairs conductor + foil shield + braid shield;
Tasker: p/n C521 - 1x 24AWG twisted pair conductor + foil shield + braid shield;
Tasker: p/n C522 - 2x 24AWG twisted pairs conductor + foil shield + braid shield.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 13 of 30
RS422:
For terminate the RS422 line with a 220Ω resistor it is necessary to put ON dip 1 for T line and/or put ON dip 2 for R line, like in fi ure.
The maximum len th of the cable should be 1200m (4000 feet).

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 14 of 30
RS232 :
The connection from RS232 socket to a serial port (example one from a personal computer) must be made with a Null Modem cable (a serial
cable where the pins 2 and 3 are crossed).
It is recommended that the RS232 cable not exceed 15 meters.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 15 of 30
ETHERNET:
The updatin of the converter must be made usin Connector3 and Connector4 of the HD67667-x-A1 with at least a Cate ory 5E cable. The
maximum len th of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to
100 Mbps. To connect the device to an Hub/Switch is recommended the use of a strai ht cable, to connect the device to a PC/PLC/other is
recommended the use of a cross cable.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 16 of 30
USE OF COMPOSITOR SW67667:
To confi ure the Converter, use the available software that runs with Windows called SW67667. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launchin the SW67667, the window below appears (Fi . 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67
6
67

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 17 of 30
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s confi uration.
A device’s confi uration can also be imported or exported:
To clone the confi urations of a pro rammable “EtherNet/IP Master / Serial -
Converter” in order to confi ure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 18 of 30
SOFTWARE OPTIONS:
By pressin the “Settings” ( ) button there is the possibility to chan e the lan ua e of the software and check the updatin s for the
compositor.
In the section “Lan ua e” it is possible to chan e the lan ua e of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatin s of the software compositor in ADFweb.com website.
Checkin the option “Check Software Update at Start of Program”, the
SW67667 checks automatically if there are updatin s when it is launched.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 19 of 30
In the section “Software Settin s”, it is possible to enable/disable some
keyboard’s commands for an easier navi ation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Ether
Net/IP Master
/
Serial
Document code: MN67667_ENG Revision 1.000 Pa e 20 of 30
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses,
EtherNet/IP and Serial.
By Pressin the “Set Communication” button from the main window for SW67667 (Fi .
2) the window “Set Communication” appears (Fi . 3).
The means for the fields for the “Serial” are:
In the field “Serial” the type of serial port used is defined;
In the field “Baudrate” the baud rate for the Serial side is defined;
In the field “Parity” the parity for the Serial side is defined;
In the field “Stop Bits” the number of Stop Bit is defined.
The means of the fields for “EtherNet/IP Master” are:
In the fields “IP ADDRESS” the IP address for EtherNet/IP side of the converter
is defined;
In the fields “SUBNET Mask” the SubNet Mask for EtherNet/IP side of the
converter is defined;
In the fields “GATEWAY” the default ateway of the net is defined. This feature
can be enabled or disabled pressin the Check Box field. This feature is used for
oin out of the net;
In the field “Port” the port used for EtherNet/IP communication is defined. The
port has a fixed value of 44818.
Figure 3: “Set Communication” window