ADF Web HD67D17-IP-B2-868MHz User manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 1 of 31
User Manual
Revision 1.000
En lish
LoRaWAN / BACnet Slave - Converter
(Order Code: HD67D17-IP-B2-868MHz, HD67D17-MSTP-B2-
868MHz)
For Website information:
www.adfweb.com?Product=HD67D17-B2
For Price information:
www.adfweb.com?Price=HD67D17-IP-B2-868MHz
www.adfweb.com?Price=HD67D17-MSTP-B2-868MHz
Benefits and Main Features:
Very easy to confi ure
Power Supply 18…35V DC and 8…24 V AC
Temperature ran e: -40°C/+85°C (-40°F/+185°F)
For others LoRaWAN products, see also the followin links:
Converter LoRaWAN to
www.adfweb.com?Product=HD67D01 (Modbus Master)
www.adfweb.com?Product=HD67D02 (Modbus Slave)
www.adfweb.com?Product=HD67D03 (Modbus TC Master)
www.adfweb.com?Product=HD67D04 (Modbus TC Slave)
www.adfweb.com?Product=HD67D05 (Serial)
www.adfweb.com?Product=HD67D15 (M-Bus)
www.adfweb.com?Product=HD67D16 (BACnet Master)
www.adfweb.com?Product=HD67D18 (Ethernet)
www.adfweb.com?Product=HD67D19 (CAN)
www.adfweb.com?Product=HD67D20 (CANopen)
www.adfweb.com?Product=HD67D21 (DeviceNet Master)
www.adfweb.com?Product=HD67D22 (DeviceNet Slave)
www.adfweb.com?Product=HD67D23 (DMX)
www.adfweb.com?Product=HD67D24 (EtherNet/I Master)
www.adfweb.com?Product=HD67D25 (EtherNet/I Slave)
www.adfweb.com?Product=HD67D26 (J1939)
www.adfweb.com?Product=HD67D27 (KNX)
www.adfweb.com?Product=HD67D28 (NMEA 0183)
www.adfweb.com?Product=HD67D29 (NMEA 2000)
www.adfweb.com?Product=HD67D30 ( ROFIBUS Master)
www.adfweb.com?Product=HD67D31 ( ROFIBUS Slave)
www.adfweb.com?Product=HD67D32 ( ROFINET Master)
www.adfweb.com?Product=HD67D33 ( ROFINET Slave)
www.adfweb.com?Product=HD67D34 (IEC61850 Client)
www.adfweb.com?Product=HD67D35 (IEC61850 Server)
www.adfweb.com?Product=HD67D36 (MQTT)
www.adfweb.com?Product=HD67D37 (O C UA Client)
www.adfweb.com?Product=HD67D38 (O C UA Server)
www.adfweb.com?Product=HD67D39 (S7comm)
www.adfweb.com?Product=HD67D40 (SNM Manager)
www.adfweb.com?Product=HD67D41 (SNM Agent)
User Manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 2 of 31
INDEX:
Pa e
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 7
CONFIGURATION 7
POWER SUPPLY 8
FUNCTION MODES 9
LEDS 10
LORAWAN 11
ETHERNET 12
RS485 (FOR BACNET MS/TP) 13
USE OF COMPOSITOR SW67D17 14
NEW CONFIGURATION / OPEN CONFIGURATION 15
SOFTWARE OPTIONS 16
SET COMMUNICATION 18
LORAWAN ACCESS 21
SET BACNET ACCESS 23
BACNET EDE FILE 24
UPDATE DEVICE 25
LORAWAN PAYLOAD 27
MECHANICAL DIMENSIONS 28
ORDERING INFORMATIONS 29
ACCESSORIES 29
DISCLAIMER 30
OTHER REGULATIONS AND STANDARDS 30
WARRANTIES AND TECHNICAL SUPPORT 31
RETURN POLICY 31
U DATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the followin document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top ri ht-hand corner of each pa e of this document.
With this “Document Code” o to web pa e www.adfweb.com/download/
and search for the correspondin code on the pa e. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
WARNING:
ADFweb.com reserves the ri ht to chan e information in this manual about
our product without warnin .
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belon to their respective
owners.
Revision Date Author Chapter Description
1.000 04/12/2020 Ff All First release version

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 3 of 31
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated accordin to the instructions in the manual. When usin the device, le al and
safety re ulation are required for each individual application. The same applies also when usin accessories.
I NTENDED U SE
Machines and systems must be desi ned so the faulty conditions do not lead to a dan erous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissionin and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the followin symbol:
This symbol indicates that non-observance of the safety instructions is a dan er for people that could lead to serious injury or
death and / or the possibility of dama e.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or ive us a call if you need it.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 4 of 31
EXAM LE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 5 of 31
CONNECTION SCHEME:
Figure 1a: Connection scheme for HD67D17-I -B2-xxxMHz

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 6 of 31
Figure 1b: Connection scheme for HD67D17-MST -B2-xxxMHz

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 7 of 31
CHARACTERISTICS:
The HD67D17-B2 is a LoRaWAN / BACnet Slave Converter.
It allows the followin characteristics:
Electrical isolation between BACnet and Power Supply;
Mountable on 35mm Rail DIN;
Wide power supply input ran e: 18…35V DC and 8…24V AC;
Wide temperature ran e: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67D17 software on your PC in order to perform the followin :
Define the parameter of BACnet line;
Define the parameter of LoRaWAN line;
Define the list of BACnet objects accessible by the external BACnet Master;
Define the list of LoRaWAN messa es in uplink and downlink to the LoRaWAN ateway;
Update the device.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 8 of 31
OWER SU LY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67D17-xxxx-B2-xxxMHz 3.5
HD67D17
-
xxxx
-
B2
-
xxxMHz
Caution: Not reverse the polarity power

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 9 of 31
FUNCTION MODES:
The device has ot two functions mode dependin of the position of the ‘Dip1 of Dip-Switch A’:
The first, with ‘Dip1 of Dip-Switch A’ at “OFF” position, is used for the normal workin of the device.
The second, with ‘Dip1 of Dip-Switch A’ at “ON” position, is used for upload the Project and/or Firmware.
For the operations to follow for the updatin , see ‘UPDATE DEVICE’ section.
Accordin to the functionin mode, the LEDs will have specifics functions, see ‘LEDS’ section.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 10 of 31
LEDS:
The device has ot four LEDs that are used to ive information of the functionin status.
The various meanin s of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: Device State ( reen) Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
2: LoRaWAN communication
(yellow) Blinks when LoRaWAN data is received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
3: BACnet communication
(yellow) Blinks when a BACnet request is received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
4: Error state (yellow) ON: An error in the communication busses occurs
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 11 of 31
LORAWAN:
The LoRaWAN® specification is a Low Power, Wide Area (LPWA) networkin protocol
desi ned to wirelessly connect battery operated ‘thin s’ to the internet in re ional, national
or lobal networks, and tar ets key Internet of Thin s (IoT) requirements such as bi-
directional communication, end-to-end security, mobility and localization services.
LoRaWAN® network architecture is deployed in a star-of-stars topolo y in which ateways
relay messa es between end-devices and a central network server.
The wireless communication takes advanta e of the Lon Ran e characteristics of the LoRa
physical layer, allowin a sin le-hop link between the end-device and one or many
ateways. All modes are capable of bi-directional communication, and there is support for
multicast addressin roups to make efficient use of spectrum durin tasks such as
Firmware Over-The-Air (FOTA) up rades or other mass distribution messa es.
Converters from HD67D17 serie act as end-devices and they can communicate with one or
more LoRwaWAN Gateways.
The converters support all the standard datarates and they work both on public and private
networks.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 12 of 31
ETHERNET:
The Ethernet port is used for pro rammin the device and for BACnet/IP communication.
The Ethernet connection must be made usin Connector2 of HD67D17-B2 with at least a Cate ory 5E cable. The maximum len th of the
cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the
device to an Hub/Switch is recommended the use of a strai ht cable, to connect the device to a PC is recommended the use of a cross cable.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 13 of 31
RS485 (for BACnet MS/T ):
For terminatin the RS485 line with a 120Ω resistor it is necessary to put ON dip 1, like in fi ure.
The maximum len th of the cable should be 1200m (4000 feet).
Here some codes of cables:
Belden: p/n 8132 - 2x 28AWG stranded twisted pairs conductor + foil shield + braid shield;
Belden p/n 82842 - 2x 24AWG stranded twisted pairs conductor + foil shield + braid shield;
Tasker: p/n C521 - 1x 24AWG twisted pair conductor + foil shield + braid shield;
Tasker: p/n C522 - 2x 24AWG twisted pairs conductor + foil shield + braid shield.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 14 of 31
USE OF COM OSITOR SW67D17:
To confi ure the Converter, use the available software that runs with Windows called SW67D17. It is downloadable on the site
www.adfweb.com and its operation is described in this document. The software works with MS Windows (XP, Vista, Seven, 8, 10; 32/64bit).
When launchin the SW67D17, the window below appears (Fi . 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67D17

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 15 of 31
NEW CONFIGURATION / O EN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s confi uration.
A device’s confi uration can also be imported or exported:
To clone the confi urations of a Pro rammable “LoRaWAN / BACnet Slave - Converter”
in order to confi ure another device in the same manner, it is necessary to maintain
the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 16 of 31
SOFTWARE O TIONS:
By pressin the “Settings” ( ) button there is the possibility to chan e the lan ua e of the software and check the updatin s for the
compositor.
In the section “Lan ua e” it is possible to chan e the lan ua e of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatin s of the software compositor in ADFweb.com website.
Checkin the option “Check Software Update at Start of rogram”, the
SW67D17 check automatically if there are updatin s when it is launched.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 17 of 31
In the section “Software Settin s”, it is possible to enable/disable some
keyboard’s commands for an easier navi ation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 18 of 31
SET COMMUNICATION:
By Pressin the “Set Communication” button from the main window for SW67D17 (Fi . 2)
the window “Set Communication” appears (Fi . 3).
The means of the fields for the “LoRaWAN” section are:
In the field “RF Band” the wireless band used for LoRaWAN communication is
defined;
In the field “Network Type” the type of LoRaWAN network is defined;
If the field “Adaptive Data Rate” is checked, the converter will enable the ADR
functionalities to select the best data rate to be used in relation to the environmental
conditions;
In the field “Data Rate” the data rate for LoRaWAN communication is defined;
In the field “Transmission Type” the type of LoRaWAN communication is defined;
In the field “Max ayload Size” the maximum dimension of the LoRaWAN messa es
is defined (fixed in relation to the data rate selected);
In the field “Activation Method” the method used to join into a LoRaWAN network is
defined;
In the field “Device Address” the device identifier (DevEUI) is defined (only for ABP
method);
In the field “Application Identifier” the application identifier (AppEUI) is defined
(only for ABP method);
In the field “Network Session Key” the key used for the communication with the
LoRaWAN ateway (NwkSKey) is defined (only for ABP method);
In the field “Application Session Key” the key for encryption and decryption of the
payload (AppSKey) is defined (only for ABP method);
If OTAA method is selected, in the field “Application Key” the secret key for the
dynamic activation of the converter in the LoRAWAN network is defined.
Figure
3a
:
“Set Communication” window

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 19 of 31
In the section “BACnet Master” it is possible to select the type of BACnet to use from:
BACnet/IP (it uses Ethernet);
BACnet MS/TP (it uses RS485).
If selected “BACnet/IP” the means of the fields for “BACnet” are:
In the fields “I ADDRESS” the IP address of BACnet/IP side of the converter is defined;
In the fields “SUBNET Mask” the SubNet Mask of BACnet/IP side of the converter is
defined;
In the fields “GATEWAY” the default ateway of the network is defined. This feature can
be enabled or disabled pressin the Check Box field. This feature is used for oin out of
the net;
In the field “ ort” the port used for BACnet communication is defined. The default port
used for BACnet communication is 47808, but is possible to insert any value;
In the field "BACnet Device Name" the name of BACnet/IP side of the converter is
defined;
In the field “Device Identifier” the device instance of BACnet/IP side of the converter is
defined;
If the field “BACnet description up to 32 chars” is checked, the description of the
BACnet objects can be up to 32 chars.
If selected “BACnet MS/TP” the means of the fields for “BACnet” are:
In the field “Baudrate” the baudrate of BACnet MS/TP side of the converter is defined;
In the field “ arity” the parity of BACnet MS/TP side of the converter is defined;
In the field “BACnet Device Name” the name of BACnet MS/TP side of the converter is
defined;
In the field “MAC Address” the MAC of BACnet MS/TP side of the converter is defined;
The field “Max Masters” specifies the hi hest allowable address for master nodes. The
value shall be less than or equal to 127;
The field “Max Info Frames” specifies the maximum number of information frames the
node may send before it must pass the token;
In the field “Device Istance” it is possible to assi n a number to the BACnet node (used
for the Device Istance);
Figure
3b
:
“Set Communication” window

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / BACnet Slave
Document code: MN67D17_ENG Revision 1.000 Pa e 20 of 31
In the field “Network” the BACnet MS/TP network number is defined;
If the field “BACnet description up to 32 chars” is checked, the description of the BACnet objects can be up to 32 chars.
If “BACnet MS/TP” is selected, the means of the fields for the “Ethernet Update” section are:
In the fields “I ADDRESS” the IP address of the converter is defined;
In the fields “SUBNET Mask” the SubNet Mask of the converter is defined;
In the fields “GATEWAY” the default ateway of the network is defined. This feature can be enabled or disabled pressin the Check
Box field. This feature is used for oin out of the net;
In the fields “DNS” the IP Address of the DNS server is defined.