ADF Web HD67B78-A1 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 1 of 28
User Manual
Revision 1.
English
PROFINET Master / EtherNet/IP -
Converter
(Order Code: HD67B78-A1)
for Website information:
http://www.adfweb.com/?Product=HD67B78
for Price information:
http://www.adfweb.com/?Price=HD67B78-A1
Benefits and Main Features:
Triple electrical isolation
Two Ethernet ports
Temperature range: -4 °C/+85°C (-4 °F/+185°F)
For others PROFINET Master devices, see also the following links:
PROFINET Master from/to …
www.adfweb.com?Product=HD67B45 (OPC U Server)
www.adfweb.com?Product=HD67B7 (Serial)
www.adfweb.com?Product=HD67B71 (Modbus Slave)
www.adfweb.com?Product=HD67B72 (PROFIBUS Slave)
www.adfweb.com?Product=HD67B73 (C N)
www.adfweb.com?Product=HD67B74 (C Nopen)
www.adfweb.com?Product=HD67B75 (DeviceNet Slave)
www.adfweb.com?Product=HD67B76 (Modbus TCP Slave)
www.adfweb.com?Product=HD67B77 (SNMP gent)
www.adfweb.com?Product=HD67B79 (KNX)
www.adfweb.com?Product=HD67B8 (MQTT)
www.adfweb.com?Product=HD67B81 (B Cnet Slave)
www.adfweb.com?Product=HD67B82 (IEC 61850 Server)
www.adfweb.com?Product=HD67B84 (Ethernet)
Do you have an your customer protocol?
See the following links:
www.adfweb.com?Product=HD67 3
Do you need to choose a device? do you want help?
Ask it to the following link:
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 2 of 28
INDEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
POWER SUPPLY 7
FUNCTION MODES 8
LEDS 9
ETHERNET 1
USE OF COMPOSITOR SW67B78 11
NEW PROJECT / OPEN PROJECT 12
SOFTWARE OPTIONS 13
SET COMMUNICATION 15
PROFINET ACCESS 16
UPDATE DEVICE 19
PLC CONFIGURATION 21
MECHANICAL DIMENSIONS 25
ORDERING INFORMATIONS 26
ACCESSORIES 26
DISCLAIMER 27
OTHER REGULATIONS AND STANDARDS 27
WARRANTIES AND TECHNICAL SUPPORT 28
RETURN POLICY 28
Pagina 2 di 28
UPD TED DOCUMENT TION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
Revision Date uthor Chapter Description
1. 13/ 3/2 19 Ff All First release version
W RNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TR DEM RKS:
All trademarks mentioned in this document belong to their respective
owners.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 3 of 28
SECURITY LERT:
G ENER L I NFORM TION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q U LIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDU L R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 4 of 28
EX MPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 5 of 28
CONNECTION SCHEME:
Figure
1
: Connection scheme for HD67
B7
8
-
A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 6 of 28
CH R CTERISTICS:
The HD67B78-A1 is a PROFINET Master / EtherNet/IP converter.
It allows the following characteristics:
Up to 496 bytes in reading and 496 bytes in writing;
Two-directional information between EtherNet/IP and PROFINET;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -4 °C / 85°C [-4 °F / +185°F].
CONFIGUR TION:
You need Compositor SW67B78 software on your PC in order to perform the following:
Define the parameter of the PROFINET;
Define the parameter of the EtherNet/IP;
Define the list of PROFINET slaves connected to the converter;
Update the device.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 7 of 28
POWER SUPPLY:
The devices can be powered between a wide range of tensions. For more details see the two tables below.
V C
VDC
Vmin Vmax Vmin Vmax
HD67B78- 1 8V 24V 12V 35V
Consumption at 24V DC:
Device W/V
HD67B78-A1 4
Caution: Not reverse the polarity power
HD67B78-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 8 of 28
FUNCTION MODES:
The device has got two functions mode depending of the position of the Dip1 of ‘Dip-Switch A’:
The first, with Dip1 in Off position (factory setting), is used for the normal working of the device.
The second, with Dip1 in On position, is used for upload the Project/Firmware.
For the operations to follow for the updating (see ‘UPDATE DEVICE’ section).
According to the functioning mode, the LEDs will have specifics functions (see ‘LEDS’ section).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 9 of 28
LEDS:
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply voltage ]
(green)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: MT [maintenance display]
(yellow)
ON: Maintenance are present
OFF: No maintenance are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: BF [bus fault] (red)
ON: The Ethernet connection is defective; the IP
address exists several times in the network; the own
NameOfStation exists several times in the network; no
IP address has been set
Flashing: At least one configured AR is no longer in
the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: SF [group error] (red) ON: At least one AR is not in the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Ethernet1 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
6: Ethernet2 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 1 of 28
ETHERNET:
The Ethernet connection must be made using Connector3 or Connector4 of HD67B78-A1 with at least a Category 5E cable. The maximum
length of the cable should not exceed 1 m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 1 Mbps. To
connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended
the use of a cross cable.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 11 of 28
USE OF COMPOSITOR SW67B78:
To configure the Converter, use the available software that runs with Windows called SW67B78. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 1 ; 32/64bit).
When launching the SW67B78, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67B
7
8

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 12 of 28
NEW CONFIGUR TION / OPEN CONFIGUR TION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “PROFINET Master / EtherNet/IP -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 13 of 28
SOFTW RE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67B78 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 14 of 28
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 15 of 28
SET COMMUNIC TION:
This section define the fundamental communication parameters of two buses,
PROFINET and EtherNet/IP.
By Pressing the “Set Communication” button from the main window for SW67B78
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “PROFINET Master” are:
In the fields “IP ddress” the IP address for PROFINET side of the converter
is defined;
In the fields “SubNet Mask” the SubNet Mask for PROFINET side of the
converter is defined;
In the fields “Gateway” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used
for going out of the net;
In the field "Name of Station" the name of the PROFINET node is defined.
In the field “IP ddress” the IP address for EtherNet/IP side of the converter
is defined;
In the field “SubNet Mask” the SubNet Mask for EtherNet/IP side of the
converter is defined;
In the field “Gateway” the default gateway of the network is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “Port” the port to use for EtherNet/IP communication is defined;
In the field "Number Bytes Input" the number of byte from the EtherNet/IP
Master to the converter is defined;
In the field "Number Bytes Output " the number of byte from the converter
to the EtherNet/IP Master is defined;
Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 16 of 28
Figure 4: “Definition of ROFINET Devices resent in Network” window
PROFINET CCESS:
By Pressing the “PROFINET ccess” button from the main window for SW67B78 (Fig. 2) the window “Definition of PROFINET Devices
Present in Network” appears (Fig. 4).
This section is used to define the list of the PROFINET slaves to read/write with the PROFINET Master. It is possible to add the PROFINET
slaves from the hardware catalog. If a new device will be connected, it is possible to instal the GSDML file.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 17 of 28
The means of the fields below are:
If the field “Name of Station” is checked, the name of the PROFINET slave is defined;
In the field “IP ddress” the IP Address of the PROFINET slave is defined;
In the field “Update Time [ms]” the delay used for IO communication is defined;
In the field “ nswer TimeOut” the allowed number of cycles without response from the slave is defined.
Warning:
The data from/to the slaves are mapped consecutively into the IN/OUT PROFINET arrays, following the order with which they are
defined.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 18 of 28
Figure 5: “Definition Module and/or Submodules of ROFINET Device” window
By clicking on “Modules” button, it is possible to import the modules for the selected PROFINET slave device. The window “Definition Module
and/or Submodules of PROFINET Device” appears (Fig. 5). In the main table it is possible to import the Modules of the PROFINET device in
use. In the properties below, it is possible to set the parameters of the slave. These options depends on the slave in use, refer to the manual
of the PROFINET device.
The means of the checkboxes inside the table are:
If the field “Map Only Data” is checked, only the data of the modules are mapped into the EtherNet/IP arrays. Otherwise, for each
module there will be the status of IN and OUT areas too (1 byte);
If the field “Different Word” is checked, the data of the different modules are mapped in different and consecutive words without
splitting them.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 19 of 28
UPD TE DEVICE:
By pressing the “Update Device” button, it is possible to load the created
Configuration into the device; and also the Firmware, if necessary. This by using the
Ethernet port.
If you don’t know the actual IP address of the device you have to use this procedure:
Turn OFF the Device;
Put Dip2 of ‘Dip-Switch A’ in ON position;
Turn ON the device
Connect the Ethernet cable;
Insert the IP “192.168.2.205”;
Select which operations you want to do;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” turn OFF the Device;
Put Dip2 of ‘Dip-Switch A’ in OFF position;
Turn ON the device.
If you know the actual IP address of the device, you have to use this procedure:
Turn ON the Device with the Ethernet cable inserted;
Insert the actual IP of the Converter;
Select which operations you want to do;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” the device automatically goes at Normal Mode.
At this point the configuration/firmware on the device is correctly updated.
Figure 6: “Update device” windows

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
PROFINET Mast
er /
EtherNet/IP
Document code: MN67B78_ENG Revision 1. Page 2 of 28
Note:
When you receive the device, for the first time, you also have to update the Firmware in the HD67B78 device.
Warning:
If Fig. 7 appears when you try to do the Update try these points before seeking
assistance:
Check if the serial COM port selected is the correct one;
Check if the serial cable is connected between the PC and the device;
Try to repeat the operations for the updating;
Try with another PC;
Try to restart the PC;
Check the LAN settings;
If you are using the program inside a Virtual Machine, try to use in the main
Operating System;
If you are using Windows Seven, Vista, 8 or 1 make sure that you have the
administrator privileges;
In case you have to program more than one device, using the "UDP Update", you
have to cancel the ARP table every time you connect a new device on Ethernet.
For do this you have to launch the "Command Prompt" and write the command
"arp -d". Pay attention that with Windows Vista, Seven, 8, 1 you have to launch
the "Command Prompt" with Administrator Rights;
Pay attention at Firewall lock.
Warning:
In the case of HD67B78 you have to use the software “SW67B78”: www.adfweb.com\download\filefold\SW67B78.zip.
Figure
7
:
“
Error
” window