ADF Web HD67726-IP-A1 User manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 1 of 42
User Manual
Revision 1.100
English
BACnet Master / SNMP Agent - Converter
(Order Code: HD67726-I -A1 , HD67726-MST -A1, HD67726-MST -B2)
For Website information:
www.adfweb.com? roduct=HD67726
For rice information:
www.adfweb.com? rice=HD67726-I -A1
www.adfweb.com? rice=HD67726-MST -A1
www.adfweb.com? rice=HD67726-MST -B2
Benefits and Main Features:
Very easy to configure
Triple Electrical isolation
Temperature range: -40°C/+85°C (-40°F/+185°F)
For other BACnet products see also the following link:
Converter BACnet Master to
www.adfweb.com? roduct=HD67704 (DMX)
www.adfweb.com? roduct=HD67712 (Modbus Slave)
www.adfweb.com? roduct=HD67714 (Modbus CP Slave)
www.adfweb.com? roduct=HD67716 (PROFIBUS Slave)
www.adfweb.com? roduct=HD67717 (CAN)
www.adfweb.com? roduct=HD67718 (CANopen)
www.adfweb.com? roduct=HD67719 (PROFINE )
www.adfweb.com? roduct=HD67721 (DeviceNet Slave)
www.adfweb.com? roduct=HD67722 (EtherNet/IP)
www.adfweb.com? roduct=HD67723 (NMEA 2000)
www.adfweb.com? roduct=HD67725 (J1939)
www.adfweb.com? roduct=HD67801 (KNX)
www.adfweb.com? roduct=HD67832 (DALI)
Do you have your customer protocol? Then go to:
www.adfweb.com? roduct=HD67003
Do you need to choose a device? Do you want help?
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 2 of 42
INDEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LES OF CONNECTION 4
CONNECTION SCHEME 6
CHARACTERISTICS 9
CONFIGURATION 9
OWER SU LY 10
FUNCTION MODES 11
LEDS (for HD67726-I -A1) 12
LEDS (for HD67726-MST -A1/B2) 13
RS485 (for HD67726-MST -A1/B2) 14
ETHERNET 15
USE OF COM OSITOR SW67726 16
NEW CONFIGURATION / O EN CONFIGURATION 17
SOFTWARE O TIONS 18
SET COMMUNICATION 20
SET BACNET ACCESS 22
SET SNM ACCESS 26
SNM MIB 27
U DATE DEVICE 28
SNM COMMUNICATION (DYNAMIC MA ) 30
SNM COMMUNICATION (FIXED MA ) 35
MECHANICAL DIMENSIONS 38
ORDERING INFORMATIONS 40
ACCESSORIES 40
DISCLAIMER 41
OTHER REGULATIONS AND STANDARDS 41
WARRANTIES AND TECHNICAL SU ORT 42
RETURN OLICY 42
UPDA ED DOCUMEN A ION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIS :
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
RADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.
Revision Date Author Chapter Description
1.000 25/05/2015 Ff All First Release
1.001 02/09/2015 Ff All Revision
1.100 14/07/2017 Ff All Added new SNM features

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 3 of 42
SECURI Y ALER :
G ENERAL I NFORMA ION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I N ENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMI Y
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 4 of 42
EXAMPLES OF CONNEC ION:

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 5 of 42

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 6 of 42
CONNEC ION SCHEME:
Figure 1a: Connection scheme for HD67726- P-A1

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 7 of 42
Figure 1b: Connection scheme for HD67726-MSTP-A1

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 8 of 42
Figure 1c: Connection scheme for HD67726-MSTP-B2

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 9 of 42
CHARAC ERIS ICS:
The HD67726-xxx-A1 and HD67726-xxx-B2 are BACnet Master / SNM Agent Converters.
It allows for the following characteristics:
Up to 512 BACnet objects in reading and 512 objects in writing;
Triple isolation between Serial - ower Supply, Serial - Ethernet, Ethernet - ower Supply;
Two-directional information between SNM bus and BACnet bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURA ION:
You need Compositor SW67726 software on your C in order to perform the following:
Define the parameters of BACnet line;
Define the parameters of SNM line;
Define the BACnet data that the converter reads;
Define the BACnet data that the converter writes;
Define the list of SNM OIDs;
Update the device.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 10 of 42
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67726-I -A1 3.5
HD67726-MST -A1/B2 3.5
HD67726-I -A1
HD67726-MST -A1
Caution:
Do n
ot reverse the polarity power
HD67726-MST -B2

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 11 of 42
FUNC ION MODES:
The device has got two function modes depending on the position of the ‘Dip2 of Dip-Switch A’:
The first, with ‘Dip2 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip2 of Dip-Switch A’ at “ON” position, is used for uploading the roject and/or Firmware.
For the operations to follow for the updating, see ‘U DATE DEVICE’ section.
According to the functioning mode, the LEDs will have specific functions, see ‘LEDS’ section.
Warning:
Dip1 of ‘Dip-Switch A’ must be at ON position to work even if the Ethernet cable is not inserted.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 12 of 42
LEDS (for HD67726-IP-A1):
The device has got six LEDs that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply voltage ]
(green)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: Not used (green) OFF
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in
progress
3: Device state (green) ON: Maintenance roblem is present
OFF: No maintenance are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: Not used (green) OFF Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Ethernet1 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
6: Ethernet2 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 13 of 42
LEDS (for HD67726-MS P-A1/B2):
The device has got four LEDs (five the –B2 version) that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: Device State (green) Blinks slowly (~1Hz) ON: Device powered
OFF: Device not powered
2: Ethernet Link (green) ON: Ethernet cable connected
OFF: Ethernet cable disconnected
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: Ethernet comm. (green) Blinks quickly when SNM request is received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: Serial comm. (green) Blinks quickly when BACnet reply is received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Not Used OFF Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 14 of 42
RS485 (HD67726-MS P-A1/B2):
To terminate the RS485 line with a 120Ω resistor it is necessary to put ON dip 1, like in figure.
The maximum length of the cable should be 1200m (4000 feet).
Here some codes of cables:
Belden: p/n 8132 - 2x 28AWG stranded twisted pairs conductor + foil shield + braid shield;
Belden p/n 82842 - 2x 24AWG stranded twisted pairs conductor + foil shield + braid shield;
Tasker: p/n C521 - 1x 24AWG twisted pair conductor + foil shield + braid shield;
Tasker: p/n C522 - 2x 24AWG twisted pairs conductor + foil shield + braid shield.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 15 of 42
E HERNE :
The BACnet/I and SNM connection and the updating of the converters must be made using Connector3 and/or Connector4 and/or
Connector5 of HD67726-xxx-A1/B2 with at least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable
has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended
the use of a straight cable, to connect the device to a C/ LC/other is recommended the use of a cross cable.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 16 of 42
USE OF COMPOSI OR SW67726:
To configure the Converter, use the available software that runs with Windows called SW67726. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (X , Vista, Seven, 8, 10; 32/64bit).
When launching the SW67726, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main
window for SW67726

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 17 of 42
NEW CONFIGURA ION / OPEN CONFIGURA ION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “BACnet Master / SNM Agent -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 18 of 42
SOF WARE OP IONS:
By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67726 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 19 of 42
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Master / SNMP Agent
Document code: MN67726_ENG Revision 1.100 age 20 of 42
SE COMMUNICA ION:
This section define the fundamental communication parameters of two buses, BACnet and SNM .
By ressing the “Set Communication” button from the main window for SW67726 (Fig. 2) the
window “Set Communication” appears (Fig. 3).
In the section “BACnet Type” is possible to select the type of BACnet to use from:
BACnet/I (over Ethernet);
BACnet MS/T (over RS485).
If selected “BACnet/I ” the means of the fields for “BACnet” are:
In the field “IP ADDRESS” the I address of the converter is defined;
In the field “SUBNE Mask” the SubNet Mask of the converter is defined;
In the field “GA EWAY” the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “Port” the port number used for BACnet communication is defined. The default port
used for BACnet communication is 47808, but is possible to insert any value (except 10000 and
10001);
In the field "BACnet Device Name" the name of the BACnet side of the converter is defined;
In the field “Device Identifier” the ID of the BACnet/I side of the converter is defined (used
for the Device Identifier).
Figure
3a
:
“Set Communication” window