ADLINK Technology MXM-P1000 User manual

Leading EDGE COMPUTING
MXM-P1000
NVIDIA® Pascal™ GP107 Quadro® P1000
Embedded Graphics Module
User’s Manual
Manual Rev.: 1.0
Revision Date: June 19, 2019
Part No: 50-1Z297-1000

ii
Leading EDGE COMPUTING
Revision History
Revision Release Date Description of Change(s)
1.0 June 19, 2019 Initial Release

Preface iii
MXM-P1000
Preface
Copyright 2019 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsi-
bility to global environmental preservation
through compliance with the European Union's
Restriction of Hazardous Substances (RoHS)
directive and Waste Electrical and Electronic
Equipment (WEEE) directive. Environmental pro-
tection is a top priority for ADLINK. We have
enforced measures to ensure that our products,
manufacturing processes, components, and raw
materials have as little impact on the environment as possible.
When products are at their end of life, our customers are encour-
aged to dispose of them in accordance with the product disposal
and/or recovery programs prescribed by their nation or company.

iv Preface
Leading EDGE COMPUTING
Battery Labels (for products with battery)
California Proposition 65 Warning
WARNING: This product can expose you to chemicals
including acrylamide, arsenic, benzene, cadmium,
Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4-
Dioxane, formaldehyde, lead, DEHP, styrene, DINP,
BBP, PVC, and vinyl materials, which are known to the State of
California to cause cancer, and acrylamide, benzene, cadmium,
lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP,
BBP, PVC, and vinyl materials, which are known to the State of
California to cause birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
ᘄ㟁ụㄳᅇᨲ

Preface v
MXM-P1000
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

vi Preface
Leading EDGE COMPUTING
This page intentionally left blank.

Table of Contents vii
MXM-P1000
Table of Contents
Preface .................................................................................... iii
List of Tables.......................................................................... ix
List of Figures ........................................................................ xi
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 1
1.3 Specifications....................................................................... 2
1.3.1 Board .......................................................................... 2
1.3.2 Memory Configuration ................................................ 2
1.3.3 Display Support and Options...................................... 3
1.3.4 OS .............................................................................. 3
1.3.5 Software Support........................................................ 3
1.3.6 Graphics Options........................................................ 3
1.4 Functional Block Diagram.................................................... 4
1.5 Layout and I/O ..................................................................... 5
1.5.1 MXM Connector.......................................................... 6
1.6 Thermal Policy ................................................................... 11
1.7 Unpacking Checklist .......................................................... 12
2 System Requirements...................................................... 13
2.1 Power Sequencing............................................................. 13
2.2 Module Power Up and Down ............................................. 13
2.3 Reset Requirements .......................................................... 14
2.4 Dual Mode DisplayPort Implementation ............................ 14
2.5 DVI/HDMI on DisplayPort Interface ................................... 15
2.6 Driver Installation ............................................................... 16
2.7 Certifications & Agencies................................................... 16

viii Table of Contents
Leading EDGE COMPUTING
Important Safety Instructions............................................... 17
Getting Service ...................................................................... 21

List of Tables ix
MXM-P1000
List of Tables
Table 1-1: Graphics Module Display Options .............................. 3
Table 1-2: NVIDEA Link Display Types ....................................... 4
Table 1-3: MXM Connector Pin Assignments.............................. 6
Table 1-4: Thermal Policy.......................................................... 12

xListofTables
Leading EDGE COMPUTING
This page intentionally left blank.