ADLINK Technology cPCI-6636 Series User manual

Leading EDGE COMPUTING
Manual Rev.: 0.1
Revision Date: August 20, 2018
Part No: 50-15111-2000
cPCI-6636 Series
Value 6U CompactPCI®
Intel® Xeon® E3, Core™ i7/i3 Processor Blade
User’s Manual

ii Revision History
Leading EDGE COMPUTING
Revision History
Revision Release Date Description of Change(s)
0.1 2018-08-20 Preliminary release

Preface iii
cPCI-6636
Preface
Copyright 2018 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsi-
bility to global environmental preservation
through compliance with the European Union's
Restriction of Hazardous Substances (RoHS)
directive and Waste Electrical and Electronic
Equipment (WEEE) directive. Environmental
protection is a top priority for ADLINK. We have
enforced measures to ensure that our products,
manufacturing processes, components, and raw
materials have as little impact on the environment as possible.
When products are at their end of life, our customers are encour-
aged to dispose of them in accordance with the product disposal
and/or recovery programs prescribed by their nation or company.
Battery Labels (for products with battery)
ᑜ㔚ᳰ⺧࿁ᡴ

iv Preface
Leading EDGE COMPUTING
California Proposition 65 Warning
WARNING: This product can expose you to chemicals
including acrylamide, arsenic, benzene, cadmium,
Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Diox-
ane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
cancer, and acrylamide, benzene, cadmium, lead, mercury,
phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

Table of Contents v
cPCI-6636
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures....................................................................... vii
List of Tables.......................................................................... ix
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 2
1.3 Model Number Decoder....................................................... 4
1.4 Package Contents ............................................................... 5
2 Specifications..................................................................... 7
2.1 cPCI-6636(D) Processor Blade Specifications.................... 7
2.2 Block Diagrams.................................................................. 10
2.3 I/O Connectivity Table ....................................................... 11
2.4 Power Requirements......................................................... 12
3 Functional Description .................................................... 13
3.1 Processors......................................................................... 13
3.2 Chipset............................................................................... 16
3.3 XMC................................................................................... 17
3.4 Intel® Turbo Boost Technology......................................... 17
3.5 Intel® Hyper-Threading Technology.................................. 18
3.6 Battery ............................................................................... 18
4 Board Interfaces............................................................... 19
4.1 cPCI-6636(D) Component Side Layout............................. 19
4.2 cPCI-6636D/DZ Assembly Layoutt.................................... 20

vi Table of Contents
Leading EDGE COMPUTING
4.3 cPCI-6636(D/DZ) Faceplate I/O......................................... 21
4.4 Connector Pin Assignments............................................... 23
4.5 Switches and Buttons ........................................................ 35
Important Safety Instructions............................................... 41
Getting Service...................................................................... 43

List of Figures vii
cPCI-6636
List of Figures
Figure 2-1: cPCI-6636(D/DZ) Blade Functional Block Diagram.......10
Figure 4-1: cPCI-6636(D) Component Side Layout.........................19
Figure 4-2: cPCI-6636D/DZ Assembly Layout.................................20
Figure 4-3: cPCI-6636(D/DZ) Faceplate I/O ....................................21
Figure 4-4: cPCI-6636 Series Switch Locations - Component Side.35
Figure 4-5: cPCI-6636 Series Switch Locations - Solder Side.........36

viii List of Figures
Leading EDGE COMPUTING
This page intentionally left blank.

List of Tables ix
cPCI-6636
List of Tables
Table 2-1: cPCI-6636 Processor Blade Specifications.....................7
Table 2-2: cPCI-6636(D/DZ) I/O Connectivity.................................11
Table 4-1: cPCI-6636(D) Front Panel System LED Descriptions ...22
Table 4-2: LAN1/2 RJ-45 GbE Pin Definitions................................23
Table 4-3: LAN LED Status Definitions...........................................23
Table 4-4: USB 3.0 Pin Definitions .................................................24
Table 4-5: cPCI-6636(D) COM Pin Definitions ...............................24
Table 4-6: cPCI-6636(D) COM RJ-45 to DB-9 Cable Pin Definitions25
Table 4-7: cPCI-6636DZ COM1/2 Pin Definitions...........................25
Table 4-8: cPCI-6636DZ COM3/4 Pin Definitions...........................26
Table 4-9: cPCI-6636DZ COM5/6 Pin Definitions...........................26
Table 4-10: cPCI-6636DZ COM RJ-45 to 2x DB-9 Cable Pin Definitions
27
Table 4-11: DVI-I Connector Pin Definition.......................................28
Table 4-12: Serial ATA 7-pin Connector Pin Definition.....................29
Table 4-13: Serial ATA Connector with power Pin Definition............29
Table 4-14: CFast Socket Pin Definition...........................................30
Table 4-15: CompactPCI J1 Connector Pin Definition......................31
Table 4-16: CompactPCI J2 Connector Pin Definition......................32
Table 4-17: CompactPCI J3 Connector Pin Definition......................33
Table 4-18: CompactPCI J5 Connector Pin Definition......................34

xListofTables
Leading EDGE COMPUTING
This page intentionally left blank.

1
cPCI-6636
1 Introduction
1.1 Overview
The ADLINK cPCI-6636 Series is a 6U CompactPCI® processor
blade based on the Intel® Xeon® E3 and 6th Generation Intel®
Core™ i7/i3 Processors with Intel® HM170 or CM236 Chipsets.
When paired with the Intel® CM236, the cPCI-6636 supports ECC
memory. The cPCI-6636 supports up to 16GB onboard
DDR4-2133 memory and 16GB DDR4-2133 via SODIMM. Total
memory capacity is up to 32GB of DDR4-2133. The cPCI-6636 is
a highly integrated processor blade fit for mission critical applica-
tions in industries ranging from automation to defence.
The cPCI-6636 Series supports flexible I/O interfaces with the
cPCI-6636 in single-slot (4HP) and cPCI-6636D/DZ in dual slot
(8HP) width form factors. Faceplate I/O for the cPCI-6636 (4HP)
includes 2x GbE supported by an Intel® i219LM PHY controller
and Intel® i210IT Ethernet controller, 3x USB 3.0, 1x RJ-45 serial
port, and 1x DVI-I. Onboard I/O includes one 2.5" SATA drive
space, one 7-pin SATA connector, and one CFast slot by adapter
board. The cPCI-6636D (8HP) has identical I/O to the single-slot
version, except that an XMC connector via PCIe x8 adapter board
is supported in place of the CFast slot. A third configuration, the
cPCI-6636DZ, supports 8x USB 3.0, 2x GbE, 6x serial TX/RX and
2x VGA on the faceplate, and the same onboard I/O as the
two-slot "D" version. The cPCI-6636 Series supports with 66/64-bit
PCI signaling. Additional signals including additional 3x SATA, up
to 4x Ethernet ports, USB 2.0, PCIe x4, audio, display, and serial
signals to rear J3 and J5 (DZ version supports no rear I/O). Graph-
ics support is integrated on the Intel® processor with VGA and
DVI-I options. Rear display output signal is reserved to J3 and J5
as option.
Rear I/O signals are available on cPCI-6636 and cPCI-6636D
which are equipped with CompactPCI J3 and J5 connectors.
Available to the RTM are up to 2x GbE to J3 by Intel® I210IT
Ethernet controllers for PICMG 2.16, and an additional 2x GbE
switchable to rear from the front panel for a total of up to 4x Ether-
net to rear J3 and J5. Also available are 1x VGA to J3, 1x TMDS to
J5, 2x SATA 1.5 Gb/s to J3, 1x SATA 1.5 Gb/s to J5, 6x USB 2.0 to

2
Leading EDGE COMPUTING
J3, 10x GPIO to J3 and J5, HDA and KB/MS to J3, and serial ports
to J5. For PCIe expansion, the cPCI-6636 offers one PCIe x4 or 4x
PCIe x1 to J5.
The ADLINK 8HP cPCI-6636DZ only supports operation in host
slots, whereas the cPCI-6636 and cPCI-6636D operate indepen-
dently in both host and peripheral slots without CompactPCI bus
communication (satellite mode), making it ideal for high density
computing platforms. Moreover, the cPCI-6636 supports remote
manageability by SEMA for system health monitoring over the
Internet.
The cPCI-6636 Series offers outstanding computing power from
the latest Intel® processors and is an ideal solution for military,
automation and other robust computing applications that require
the highest computing power in a rugged, reliable CompactPCI
system.
1.2 Features
X6U CompactPCI blade in 4/8HP width form factor
X14nm uFC-BGA Intel® Processor
Z Intel ® Xeon® E3-1505M v5, 2.8/3.7GHz, 4C/8T, GT2, 8M,
45W (35W by cTDP)
Z Intel ® Core™ i7-6820EQ 2.8/3.5GHz, 4C/8T, GT2, 8M, 45W
ZIntel ® Core™ i3-6100E 2.7GHz, 2C/4T, GT2, 3M, 35W
XOne channel DDR4-2133 soldered SDRAM with ECC up to
16GB; one channel with one socket SO-DIMM DDR4-2133
ECC memory up to 16GB (ECC is supported by default on
cPCI-6636 and cPCI-6636D, Core™ i7 SKUs do not support
ECC)
XSupports up to two independent displays
XcPCI-6636, cPCI-6636D support one DVI-I on front panel, addi-
tional 2x DVI routed to J3 and J5
XcPCI-6636DZ support 2x VGA on front panel, no rear I/O
graphics
X64-bit/66MHz CompactPCI interface based on PCI specifica-
tions, universal V(I/O)
XcPCI-6636DZ supports operation in host slot only

3
cPCI-6636
XcPCI-6636, cPCI-6636D support satellite mode operation in
host and peripheral slots
XOne PCIe x8 Gen3 XMC site on cPCI-6636D and
cPCI-6636DZ
XSupports SEMA for system health monitoring
X2x Gigabit Ethernet egress ports on faceplate provided by an
Intel® I219LM and I210IT GbE controller via PCIe x1 and two
additional Gigabit Ethernet ports Intel® I210IT routed to J3
(PICMG 2.16 compliant); all four GbE can be routed to rear
X1x 2.5" SATA drive space and one 7-pin SATA on all cPCI-6636
Series
X1x CFast slot on cPCI-6636 single-slot version
X1x XMC slot on cPCI-6636D and cPCI-6636DZ
X2x SATA 1.5 Gb/s to J3, 1x SATA 1.5 Gb/s to J5
X6x USB 2.0, HDA, KB/MS, RS-232 to J3
XRS-232 TX/RX to J5
X10x GPIO to J3 and J5
XTPM 2.0 support (Infineon SLB 9665XT2.0), not supported by
cPCI-6636DZ

4
Leading EDGE COMPUTING
1.3 Model Number Decoder
(A) Operating Temperature Code
Blank = 0°C to +60°C
ET= -20°C to +70°C (for CPUs with TDP below 37W only)
(B) Configuration Code
Blank = cPCI-6636 single slot with I/O (DVI-I, COM, USB 3.0 x3,
GbE x2), CFast slot, and J3/J5
D= cPCI-6636D dual slot with I/O (DVI-I, COM, USB 3.0 x3, GbE
x2), XMC slot, and J3/J5
DZ = cPCI-6636DZ dual slot with I/O (VGA x2, COM x6, USB 3.0
x8, GbE x2) and XMC slot, without J3/J5
(C) CPU Code
1505Mv5= Xeon® E3-1505M v5
6820E = Core™ i7 6820EQ
6100E = Core™ i3 6100E
(D) Onboard Memory Capacity Code
M4 = 4GB onboard memory
M8 = 8GB onboard memory
M16 = 16GB onboard memory
(E) SODIMM Memory Capacity Code
4= 4GB SODIMM
8= 8GB SODIMM
16 = 16GB SODIMM
(F) Other information
cPCI-ET6636SLXX/6820E/MX–X/X
(A) (B) (C) ( D)(E)(F )

5
cPCI-6636
1.4 Package Contents
The cPCI-6636 is packaged with the following components. If any
of the following items are missing or damaged, retain the shipping
carton and packing material and contact the dealer for inspection.
Please obtain authorization before returning any product to
ADLINK. The packing contents of cPCI-6636 Series non-standard
configurations will vary depending on customer requests.
cPCI-6636(D) Processor Blade
XProcessor Blade
ZCPU and memory specifications will differ depending on
options selected
ZThermal module is assembled on the board
XRJ-45 to DB-9 COM adapter cable (PN: 30-01020-0200)
X2.5" SATA drive accessory pack (PN: 58-99097-0010)
X2.5” SATA adapter board (PN: 59-37571-0000)
XCFast accessory pack (PN: 58-99300-0000,
cPCI-6636 only)
XDB-CFAST adapter board (PN: 59-37572-0000,
cPCI-6636 only)
cPCI-6636DZ Processor Blade
XProcessor Blade
ZCPU and memory specifications will differ depending on
options selected
ZThermal module is assembled on the board
X2x RJ-45 to DB-9 COM adapter cable (PN: 30-25044-1020)
X2.5" SATA drive accessory pack (PN: 58-99097-0010)
X2.5” SATA adapter board (PN: 59-37571-0000)
Rear Transition Module
XDependent on the module selected

6
Leading EDGE COMPUTING
NOTE:
NOTE:
The contents of non-standard cPCI-6636 configurations may
vary depending on the customer’s requirements.
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.

7
cPCI-6636
2 Specifications
2.1 cPCI-6636(D) Processor Blade Specifications
CompactPCI®
Standards • PICMG® 2.0 CompactPCI® Rev. 3.0 • PICMG® 2.1 Hot Swap Specification Rev. 2.0
• PICMG® 2.16 Packet Switching Backplane Rev. 1.0
Mechanical • Standard 6U CompactPCI®
• Board size: 233mm x 160mm
• Single/dual-slot (4/8HP, 20.32/40.64mm)
• CompactPCI® connectors: J1, J2, J3, J5 (cPCI-6636,
cPCI-6636D)
• CompactPCI® connectors with J1, J2 connectors
(cPCI-6636DZ)
Processor • Intel® Xeon® E3-1505M v5 Processor, dual core, dual
thread, 2.7 GHz, 3MB Smart Cache, TDP 35W
• Intel® Core™ i7-6820EQ Processor, quad core, eight thread,
2.8 GHz (3.5 GHz Turbo), 8MB Smart Cache, TDP 45W
(Note: does not support ECC)
• Intel® Core™ i3-6100E Processor, dual core, four thread, 2.7
GHz, 3MB Smart Cache, TDP 35W
• Passive heatsink
Chipset • cPCI-6636(D): Mobile Intel® CM236 Chipset (w/ ECC)
• cPCI-6636DZ: Mobile Intel® HM170 Chipset (w/o ECC)
Memory • Dual channel DDR4-2133 SDRAM, up to 32GB non-ECC
memory via 2x SODIMMs
• One channel soldered onboard up to 16GB; one channel ion
SO-DIMM socket, up to 16GB
• ECC supported by CM236 PCH on cPCI-6636(D) only
(Note: Core™ i7 SKUs do not support ECC)
Graphics • Intel® HD Graphics 530 integrated on Intel® Core™
i7-6820EQ and Core™ i3-6100E processors
• Intel® HD Graphics P530 integrated on Intel® Xeon®
processor E3-1505M v5
• 1-slot versions: one DVI-I port
• 2-slot version: two VGA ports on front panel
Table 2-1: cPCI-6636 Processor Blade Specifications

8
Leading EDGE COMPUTING
Gigabit
Ethernet • One PCIe x1 Intel® I2199LM GbE PHY and two three PCIe x1 Intel® I210IT Gigabit Ethernet controllers
• Three Two egress 10/100/1000BASE-T ports on front panel,
one supporting Intel® AMT 9.0 by I219LM PHY controller
• Two 10/100/1000BASE-T ports to rear by default
• and tTheTwo front two 10/100/1000BASE-T ports switchable
to rear for PICMG 2.16. (Total up to four GbE ports to rear
total)
CompactPCI
Bus • PCI 64-bit/66MHz; 3.3V, 5V universal V I/O • All models support Host mode operation as a master in host
slots and cPCI-6636(D) support Satellite mode operation as a
standalone computer without connection to the PCI bus
Serial Ports • cPCI-6636DZ: three RJ-45 on faceplate (converts to 6x
RS-232 TX/RX by adapter)
• cPCI-6636(D): one RJ-45 RS-232/422/485, one RS-232
TX/RX to J3, one RS-232 TX/RX to J5
USB 3.0 • cPCI-6636(D): three USB 3.0 ports on faceplate
• cPCI-6636DZ: eight USB 3.0 ports on faceplate
XMC • cPCI-6636D and cPCI-6636DZ: one XMC site
Audio • High definition audio routed to J3
Storage
Interfaces1• One onboard 2.5" SATA connector supporting SATA 6Gb/s
drive on all models
• 1-slot cPCI-6636 supports onboard CFast slot
• One SATA 3Gb/s 7-pin connector onboard on all models
• cPCI-6636(D): two SATA 3Gb/s channels routed to J3
BIOS • AMI UEFI BIOS, 128Mbit SPI flash memory
OS
Compatibility • Microsoft Windows 7 64-bit • Microsoft Windows 10 64-bit
• Ubuntu 16.10.64-bit
• Fedora 22, 64-bit
• Other OS support upon request
Table 2-1: cPCI-6636 Processor Blade Specifications

9
cPCI-6636
1. The storage device limits the operational vibration tolerance. When
the application requires higher specification for anti-vibration, it is
recommended to use a flash storage device.
2. ADLINK-certified thermal design. The thermal performance is depen-
dent on the chassis cooling design. Sufficient forced air-flow is required.
Temperature limits of optional mass storage devices may also affect the
thermal specification.
Faceplate I/O cPCI-6636 (4HP)
• 3x 10/100/1000BASE-T Ethernet ports
• 1x DVI-I port & 1x DVI-D port
• 3x USB 3.0 ports
• 1x USB 2.0 port
• 1x RJ-45 serial port supporting RS-232/422/485
cPCI-6636D (8HP)
• 2x 10/100/1000BASE-T Ethernet ports
•1xDVI-Iport
• 3x USB 3.0 ports
• 1x RJ-45 serial port supporting RS-232/422/485
• 1x XMC slot
cPCI-6636DZ (8HP)
• 2x 10/100/1000BASE-T Ethernet ports
• 2x VGA ports
• 8x USB 3.0 ports
• 3x RJ-45 serial port supporting 6x RS-232 TX/RX
• 1x XMC slot
Environmental • Operating Temperature (with forced air flow)2:
Standard: -20°C to +60°C
Extended: -20°C to +70°C with forced air flow
• Storage Temperature: -50°C to 100°C
• Humidity: 95% @60°C non-condensing
• Shock: 20G peak-to-peak, 11ms duration, non-operating
•Vibration
1: 2Grms, 5-500Hz, each axis, operating (w/o hard
drive)
EMI • FCC Class A
• CE EN55032
Table 2-1: cPCI-6636 Processor Blade Specifications

10
Leading EDGE COMPUTING
2.2 Block Diagrams
cPCI-6636(D/DZ) Blade
Figure 2-1: cPCI-6636(D/DZ) Blade Functional Block Diagram
i210ITi210IT
Skylake-H
HM170
Skylake-H
HM170
DDR4-2133 soldered
Up to 16GB
J1/J2
Skylake-H
Core i7
Skylake-H
Core i7
PCIe x 4
PCIe to PCI
bridge
PCIe to PCI
bridge
PCI 64B/66M
DMI Gen3 (8GT/s)
PCIe x1
PCIe x1
RJ-45 GbERJ-45 GbE
RJ-45 GbERJ-45 GbE
USB 3.0USB 3.0
SATA 0
2.5” SATA
drive
SATA 2
7-pin SATA
LPC
SEMA 3.0SEMA 3.0
BIOSBIOS SPI
DDR4-2133 SODIMM
Up to 16GB
SMBus
USB 3.0
USB 3.0
USB 3.0
PCIe x1
PCIe x1
i210ITi210IT
i210ITi210IT
i219LMi219LM
J3
J3
(switchable to rear J5)
(switchable to rear J5)
USB 3.0USB 3.0
USB 3.0USB 3.0
SATA 1
CFast
J3 SATA x2
J5 SATA 3, GPIO x10
HDA , 6x USB 2.0, 4x GPIO
J3
KB.MS, 2x COM RS-232
J3
1x COM RS-232 (TX/RX)
J5
RJ-45 COMRJ-45 COM
1x RS-232/422/485
Super IOSuper IO
XHCIXHCI
XHCIXHCI
XHCIXHCI
XHCIXHCI
PCIe x1
PCIe x1
PCIe x1
PCIe x1
USB 3.0USB 3.0
USB 3.0USB 3.0
USB 3.0USB 3.0
USB 3.0USB 3.0
USB 3.0USB 3.0
USB 3.0
XMC PCIe x8
RJ-45 COMRJ-45 COM
2x RS-232(TX, RX)
RJ-45 COMRJ-45 COM
2x RS-232(TX, RX)
NXP PTN3355NXP PTN3355 Front VGA (DZ)Front VGA (DZ)
NXP PTN3355NXP PTN3355
DP
DP
DP
J3
VGA
J5
1x DVI, PCIe x4
J5
Front DVI-I (DZ: VGA)Front DVI-I (DZ: VGA)
DZ only
DZ only
D/DZ only