ADLINK Technology NuIPC cPCI-3500A Series User manual

NuIPC
cPCI-3500A series
3U CompactPCI All-in-one
Low Power Pentium CPU Module
User’s Guide
StockCheck.com

StockCheck.com

Copyright 2001 ADLINK Technology Inc.
All Rights Reserved.
Manual Rev. 1.00: June 21, 2001
Part No. 50-15001-100
Theinformationinthisdocumentissubject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental,orconsequentialdamagesarisingoutoftheuseorinabilitytouse
the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
NuIPC is a registered trademark of ADLINK Technology Inc.
Otherproductnamesmentionedhereinare used for identification purposes
onlyand maybetrademarksand/orregistered trademarksoftheirrespective
companies.
StockCheck.com

Getting service from ADLINK
?Customer Satisfaction is always the most important thing for ADLINK
TechnologyInc.Ifyouneedanyhelporservice,please contact us and get it.
ADLINK Technology Inc.
Web Site http://www.adlink.com.tw
http://www.adlinktechnology.com
Sales & Service [email protected]
NuDAQ [email protected]
Technical NuDAM [email protected]
Support NuIPC [email protected]m.tw
NuPRO [email protected]
TEL [phone] FAX [phone]
Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan, R.O.C.
?Please inform or FAX us of your detailed information for a prompt,
satisfactory and constant service.
Detailed Company Information
Company/Organization
Contact Person
E-mail Address
Address
Country
TEL FAX
Web Site
Questions
Product Mode
l
¨
OS
¨Computer Brand :
Environment to Use ¨M/B : ¨CPU :
¨Chipset : ¨BIOS :
¨Video Card :
¨Network Interface Card :
¨Other :
Challenge Description
SuggestionstoADLINK
StockCheck.com

Table of Contents•i
Table of Contents
Chapter 1 Introduction...........................................................1
1.1 Checklist...........................................................................1
1.2 Description........................................................................2
1.3 Features............................................................................3
1.4 Specifications of the module................................................4
Chapter 2 Hardware Installation..........................................8
2.1 Jumpers on the cPCI-3500A................................................9
2.2 Connectors on the cPCI-3500A..........................................12
2.2.1 The cPCI-3500A Module.......................................................13
2.2.2 USB Connectors......................................................................14
2.2.3 Ethernet (RJ-45) Connector..................................................14
2.2.4 Mini D-Sub Parallel Port Connector....................................14
2.2.5 Parallel Port Connector (Via Transition Cable).................15
2.2.6 PS/2 Mouse Connector..........................................................15
2.2.7 PS/2 Keyboard Connector....................................................15
2.2.8 CPU Fan Power Connector...................................................15
2.2.9 COM1 Serial Ports (RS-232 Only)........................................16
2.2.10 COM2 Serial Ports (RS-232/422/485).................................16
2.2.11 CompactPCI Connectors......................................................17
2.3 CPU Installation...............................................................19
2.4 Memory Installation..........................................................19
2.5 FDD Removal and Installation............................................20
2.6 HDD Removal and Installation............................................21
Chapter 3 Getting Start........................................................22
3.1 Using SCSI CD-ROM with cPCI SCSI interface...................22
Chapter 4 Driver Installation...............................................24
4.1 LAN Drivers Installation.....................................................26
4.1.1 Software and Drivers Support...............................................26
4.1.2 Driver Installation on Windows 2000...................................26
4.1.3 Driver Installation on Windows 98.......................................28
4.1.4 Driver Installation on Windows NT.......................................29
StockCheck.com

ii •Table of Contents
Chapter 5 Watchdog and Utilities.....................................30
5.1 Watchdog Timer Configuration...........................................30
5.1.1 WDT1 Programming..............................................................31
5.1.1.1 How to Test the WDT1?.......................................31
5.1.2 WDT2 Programming..............................................................32
5.2 Hardware Doctor Utility.....................................................34
5.3 Intel Preboot Execution Environment (PXE).........................35
Product Warranty/Service....................................................36
StockCheck.com

Introduction •1
1
Introduction
This manual is designed to give you information on the cPCI-3500A CPU
module. The topics covered in this chapter are as follows:
•Checklist
•Descriptions
•Features
•Specifications
1.1 Checklist
There are several standard configurations available for cPCI-3500A series
module. Please check your configurations with your dealer and check that
your package is complete and contains the items below. If you discover
damaged or missing items, please contact with your dealer.
•The cPCI-3500A module (May be equipped with different speed or
capacityof CPU, RAM, HDD. Those items may vary according to the
different configuration request)
•The mini D-Sub to DB25 female parallel port transition cable
(Ordering Model Number: CB-MLPT01)
•This User’s Manual
•ADLINK CD
Note: The package of cPCI-3500A OEM version (non-standard
configuration,functionality or package) mayvary accordingto the
different configuration request.
StockCheck.com

2•Introduction
1.2 Description
ThecPCI-3500A series are Low Power Pentium-MMX processor module for
3UCompactPCIformfactor. ThemoduleisbasedontheIntel 430TXchipset
and is fully designed for harsh industrial environment.
There are four standard pre-configured sub-models:
•cPCI-3500A/CA : 3U CompactPCI Low Power Pentium-MMX CPU
module in 3-slot (12TE/HP) width, equipped with Low Power
Pentium-266, 64MB RAM, 5GB (or above) 2.5” ATA HDD and
separable slim type floppy disk drive module
•cPCI-3500A/CB : 3U CompactPCI Low Power Pentium-MMX CPU
module in 3-slot (12TE/HP) width, equipped with Low Power
Pentium-266,64MB RAM, 32MBFlashDisk andseparable slim type
floppy disk drive module
•cPCI-3500A-2S/CA:3UCompactPCILowPowerPentium-MMX CPU
module in 2-slot (8TE/HP) width, equipped with Low Power
Pentium-266, 64MB RAM and 5GB (or above) 2.5” ATA HDD without
slim floppy disk drive module
•cPCI-3500A-2S/CB : 3U CompactPCI Low Power Pentium-MMX
CPU module in 2-slot (8TE/HP) width, equipped with Low Power
Pentium-266, 64MB RAM and 32MB Flash Disk without slim floppy
disk drive module
StockCheck.com

Introduction •3
1.3 Features
•PICMG 2.0 CompactPCI Specification R2.1 Compliant
•PICMG 2.1 CompactPCI Hot Swap Specification R1.0 Compliant
•Standard 3U form factor
•Design for Socket-7 Low Power Pentium-MMX CPU
•Supports up to PPGA Low Power Pentium CPU at 266MHz
•One 144-pin SO-DIMM socket supports up to 256MB RAM
•Build-in housing for 2.5” low profile HDD
•Separable slim type floppy drive module
•Two on-board EIDE 44-pin connector
•Build-in two USB ports, two serial ports, one parallel port
•Separate PS/2 type keyboard and mouse connectors
•Supports7bus-master PCI devices on CompactPCI bus peripheral
slots
•On-board 10/100Mb Ethernet port by Intel 82559 controller
•SupportsIntelpre-bootexecutionenvironment(PXE)forremoteboot
•One DOC socket supports up to 144MB DiskOnChip
•3 or 2 slots width configurations are available for customized
applications
StockCheck.com

4•Introduction
1.4 Specifications of the module
General CompactPCI Features
•PCI Rev.2.1 compliant
•PICMG 2.0 CompactPCI Rev. 2.1 compliant
•PICMG 2.1 CompactPCI Hot Swap Specification R1.0 Compliant
Form Factor
•Standard 3U CompactPCI (board size: 100mm x 160mm)
•3-slot (12TE/HP, 60.9mm) wide, incl. separable slim type floppy or
2-slot (8TE/HP, 40.6mm) wide without floppy module
CPU/Cache
•Intel Socket-7 PPGA Low Power Pentium-MMX up to 266MHz
•On-board 512KB L2 cache
•Front side bus (FSB) frequency: 66MHz
Chipset
•Intel 430TX chipset
•Intel 82439TX(MTXC) and 82371EB(PIIX4E)
BIOS
•Award PnP BIOS with 2Mb Flash ROM
•BIOS write protection, provide anti-virus capability
•Customized power-on screen (for OEM project)
•DMI BIOS Support: Desktop Management Interface (DMI) allows
userstodownloadsystemhardware-level information such as CPU
type, CPU speed, internal/external frequencies and memory size
•Green Function: Power management via BIOS, activated through
mouse/keyboard movement
Host Memory
•One 144-pin SO-DIMM socket, Max. 256MB un-buffered SDRAM
module
IDE Ports
•Bus Master IDE controller, two 44-pin EIDE interfaces support up to
four IDE devices
•Support PIO Mode 3/4 or Ultra DMA/33 IDE devices
StockCheck.com

Introduction •5
USB Interface
•Two USB ports on front faceplate.
•USB Specification Rev. 1.1. compliant
•Individual over-current protection
On Board Supper I/O
•Winbond W83977EF
•Onehigh-speed bi-directional SPP/EPP/ECP parallel port with ESD
protection to 4KV and downstream device protection to 30V
•One floppy interface, support slim type floppy drive
•Two 16C550 UARTs compatible RS-232 COM ports with ESD
protection to 2KV, COM2 supports selectable RS-232/422/485
Watchdog Timer 1
•Programmable I/O port 3F0h and 3F1h to configure watchdog timer,
programmable timer 1~255 seconds or 1~255 minutes
•Bundled easy-programming library for DOS, Windows 95, 98, NT
Watchdog Timer 2
•Programmable I/O port 440h and 443h to configure watchdog timer,
programmable timer 1~255 seconds
Hardware Monitoring
•Winbond W83781D, monitoring CPU temperature, CPU fan, system
temperature and DC Voltages
On-board Ethernet
•Intel 82559 high performance Ethernet controller
•IEEE 802.3 10Base-T/100Base-TX compatible
•IEEE 802.3u auto-negotiation support
•IEEE 802.3x 100Base-TX flow control support
•SupportsIntelpre-bootexecutionenvironment(PXE)forremote boot
of WindowsNT/2000
•Driver supporting: DOS, Novell, Windows95/98/ME/NT/2000, Linux,
SCO Unix, VxWorks
PCI Bus Mastering Support
•Supports up to 7 PCI bus mastering devices on CompactPCI bus
peripheral slots
StockCheck.com

6•Introduction
Flash Disk Supporting
•Support Flash2000TM flash disk (from 8MB to 1GB) on build-in
housing of 2.5” low profile HDD via 44-pin EIDE port
•One DOC socket supports up to 144MB DiskOnChip
Front Panel LEDs and Switch
•Power status (green)
•IDE activity (green)
•Ethernet port: 10/100Mb (amber), link/activity (green)
•Flush tact switch for system reset
Environment
•Operating temperature: 0 to 60°C
•Storage temperature: -20 to 80°C
•Humidity: 5% to 95% non-condensed
•Shock: 15G peak-to-peak, 11ms duration, non-operation
•Vibration:
üNon-operation: 1.88Grms, 5-500Hz, each axis
üOperation: 0.5Grms, 5-500Hz, each axis, with 2.5” HDD
Safety Certificate and Test
•CE, FCC
•HALT (temperature and vibration stress)
Power Consumption
Configurations +5V +3.3V +12V -12V
Low Power Pentium MMX 166 MHz, 64MB 0.5A
1.8A 50mA 0A
Low Power Pentium MMX 266 MHz, 128MB
0.5A 2.6A 50mA 0A
Note: The above values are the measured power consumption for
SBC with CPU and RAM only; the CPU is running under 100%
loading. Thepowers for alltheother peripheraldevices suchas
keyboard, mouse, add-on cards, HDD, or CD-ROM are not
included.
StockCheck.com

Introduction •7
Peripheral Connectivity
Front
I/O Faceplate Board
Serial Port (COM1) Y (DB-9) ---
Serial Port (COM2, RS-232/422/485) Y (DB-9) ---
Parallel Port (Mini D-Sub 26-pin) Y---
PS/2 Keyboard Y (PS/2) ---
PS/2 MouseY (PS/2) ---
Floppy --- Y (FL-26)
Ultra DMA 33 IDE 1 --- Y (44-pin)
Ultra DMA 33 IDE 2 --- Y (44-pin)
USB A/B Y---
10/100Mb Ethernet Port Y (RJ-45) ---
LEDs Y---
Reset button Y---
StockCheck.com

8•Hardware Installation
2
Hardware Installation
This chapter provides information on how to use the jumpers and
connectors on the cPCI-3500Ain order to set up a workable system. We
also describe how to add on components such as memory, CPU, HDD and
FDD on to the modules. The topics covered are:
•Jumpers on the cPCI-3500A
•Connectors onthe cPCI-3500A
•CPU Installation
•Memory Installation
•FDD Remove and Installation
•HDD Remove and Installation
StockCheck.com

Hardware Installation •9
2.1 Jumpers on the cPCI-3500A
The jumpers on the cPCI-3500A allow you to configure your CPU module
accordingtotheneedsofyourapplications.Ifyouhave doubts aboutthe best
jumper configuration for your needs, contact your dealer or sales
representative. ThecPCI-3500A module is constructed from the main board
(whichhasCPUSocketonit)andthedaughterboard(whichbringsoutserial
portand parallel port). There are jumpers on both main board and daughter
boards. The following table lists the jumper connectors on cPCI-3500A and
their respective functions.
Board Connector Description
Main board JP1 CPU Speed Select
Daughter board JP1, JP2, JP3 Select COM2 Type
Note :There is no jumper for DiskOnChip BIOS expansion address
selection. User can select DOC BIOS expansion address from
CMOSsetup. The defaultexpansionaddressforDOC islocated
from D8000h to DFFFFh.
StockCheck.com

10 •Hardware Installation
Jumpers and connectors map of cPCI-3500A main board (PCB name:
cPCI-3500A).
Jumpers and connectors map of cPCI-3500A daughter board (PCB name:
cPCI-3500X).
Daughter Board
Mini LPT
COM2
COM1
Floppy (FL-
26)
DOC
JP1JP2JP3
Buzzer
Super I/O
Socket-7
430TX
SO-DIMM
PIIX4E
RTC & BATBIOS
Primary IDE
Secondary IDE
USB
KB
MS
LAN
RESET
PWR & HD LED
LINK & SPEED
LED
Intel 82559
JP1
FAN
Main Board
J1
J2
BIOS RTC & BAT
StockCheck.com

Hardware Installation •11
JP1 on Main Board:
JP1 (main board) Setting Function
13Pin 1-2 Short/Closed Low Power Pentium 166MHz
13Pin 2-3 Short/Closed Low Power Pentium 266MHz
JP1~3 on Daughter Board: Select COM2 Type
Type JP1 JP2 JP3
RS-232
1-3
2-4
1-3
2-4
1-2
RS-422
3-5
4-6
3-5
4-6
3-4
RS-485
3-5
4-6
3-5
4-6
5-6
StockCheck.com

12 •Hardware Installation
2.2 Connectors on the cPCI-3500A
The connectors on the cPCI-3500A allows you to connect devices such as
keyboard,mouse,printerandinternalfloppydiskdrives,harddiskdrives,etc.
The following table lists the connectors on cPCI-3500A and their respective
functions.
2.2.1 The cPCI-3500A Module........................................................13
2.2.2 USB Connectors.......................................................................14
2.2.3 Ethernet (RJ-45) Connector...................................................14
2.2.4 Mini D-Sub Parallel Port Connector.....................................14
2.2.5 Parallel Port Connector (Via Transition Cable)..................15
2.2.6 PS/2 Mouse Connector...........................................................15
2.2.7 PS/2 Keyboard Connector.....................................................15
2.2.8 CPU Fan Power Connector....................................................15
2.2.9 COM1 Serial Ports (RS-232 Only).........................................16
2.2.10 COM2 Serial Ports (RS-232/422/485)..................................16
2.2.11 CompactPCI Connectors.......................................................17
StockCheck.com

Hardware Installation •13
2.2.1 The cPCI-3500A Module
The following picture shows the cPCI-3500A module. The front panel
connectors are USB, Ethernet, parallel port (mini D-Sub), mouse, keyboard
COM1 and COM2 port.
J2
Reset
LEDs for Power OK
and IDE activity
USB
Ethernet
J1
Floppy
Mini D-Sub LPT Port
Mouse
Keyboard
COM1
COM2
Link & Speed LED
StockCheck.com

14 •Hardware Installation
2.2.2 USB Connectors
Pin # Signal Name
1Vcc
2USB-
3USB+
4Ground
2.2.3 Ethernet (RJ-45) Connector
Pin # Signal Name
1TD+
2TD-
3RD+
6RD-
2.2.4 Mini D-Sub Parallel Port Connector
Signal Name Pin # Pin # Signal Name
Line printer strobe 114 AutoFeed
PD0, parallel data 0 215 Error
PD1, parallel data 1 316 Initialize
PD2, parallel data 2 417 Select
PD3, parallel data 3 518 Ground
PD4, parallel data 4 619 Ground
PD5, parallel data 5 720 Ground
PD6, parallel data 6 821 Ground
PD7, parallel data 7 922 Ground
ACK, acknowledge 10 23 Ground
Busy 11 24 Ground
Paper empty 12 25 Ground
Select 13 26 N/C
Port 1
Port 2
Pin 1
Pin 1
Pin 14
StockCheck.com