ADTRAN NT1 ACE User manual

NT1 ACE
ISDN Network Termination
Product Features
■ Compatible with 2B1Q
basic rate services and
standard ISDN terminals
■ Provides 2B+D basic
rate service
■ Conforms to ANSI T1.601-
1992 and ANSI
T1.605-1991
■ Supports multiple switch
vendors Lucent 5ESS, NTI
DMS-100, Siemens EWSD,
NEC, and National ISDN-1
■Responds to Quiet Mode
and Insertion Loss Test
■Provides automatic
overcurrent protection
for S/T power
■Selectable terminating
impedance; 50 Ohm,
100 Ohm, or unterminated
■Provides U-interface
lightning protection
■Standard five-year
warranty
The ADTRAN®NT1 ACE™provides the
network termination for 2B1Q ISDN basic
rate service. The NT1 ACE provides a 2B+D
basic rate interface between the subscriber’s
terminal equipment and the ISDN network.
Basic rate ISDN consists of two 64 kbps B
channels and a single 16 kbps D channel.
Connection to the ISDN network is made
with a U interface. Connection to the
subscriber’s terminal equipment is by an
S/T interface. The U and the S/T interfaces
conform to ANSI and CCITT standards and
perform all Layer 1 functions.
The NT1 ACE is designed with aesthetics as
well as functionality in mind. The unit is
enclosed in an attractive, durable plastic
housing appropriate for desk-top use. The NT1
ACE is powered by the wall-mount power
supply included with the unit. The wall-mount
power supply provides up to 8.9 W of power for
terminal equipment. The NT1 ACE monitors
the S/T interface for overcurrent fault condi-
tions. In the event of such a condition, the unit
automatically limits the amount of delivered
current until the fault condition is removed.
As many as eight passive bus devices may be
connected to the S/T interface of the NT1.
These connections can be in one of the
following two modes: multiple terminals within
50 meters of each other over the full 1,500
meter range of the interface, or multiple termi-
nals of arbitrary spacing within 200 meters.
Also, termination impedance options include
50 Ohm, 100 Ohm, or unterminated. The NT1
ACE is protected from lightning and harmful
line transients on the network interface.
Three LED status indicators on the NT1
ACE aid in fault isolation. Indicators display
the status for Power, Network Ready, Network
and Customer Errors.
READY
ERROR
POWER
NT1 ACE
ISDN
Switch
ISDN Phone
U-Interface
Local Loop
S/T
BUS
Customer Premises
Telephone
Company Office
NT1 ACE
Video-
Conference
Equipment

Specifications subject to change without notice. NT1 ACE is a trademark of ADTRAN,
Inc. ADTRAN is a registered trademark of ADTRAN, Inc. All registered trademarks and
trademarks mentioned in this publication are the property of their respective owners.
Product Specifications
Network Interface
■ Line: 2-wire (TIP and Ring)
■Operating Mode: Full-duplex
■ Data Rate: 160 kbps total;
144 kbps available to customer
■ Signal Format: 2B1Q
■ Output Amplitude: 2.5 V, Zero-to-Peak
■Tx Source Impedance: As per ANSI T1.601-1992
■Rx Source Impedance: As per ANSI T1.601-1992
■Receiver Sensitivity: As per ANSI T1.601-1992
Customer Interface
■ Line: 4-wire (Tx and Rx Pair)
■Operating Mode: Full-duplex
■Data Rate: 192 kbps total;
144 kbps available to customer
■ Signal Format: Alternate mark inversion,
100% duty cycle
■Output Amplitude: 0.75 V, Zero-to-peak
■Tx Source Impedance: As per ANSI T1.605-1991
■Rx Source Impedance: As per ANSI T1.605-1991
■Receiver Sensitivity: As per ANSI T1.605-1991
Switch Compatibility
■ Lucent 5ESS, NTI DMS-100, NEC National ISDN-1
Physical
■Size: 1.35" H, 3.75" D, 6.25" W
■ Weight: 2 lbs
■ Power: 110 vAC, 60 Hz, 1.1 W dissipation Sources
S/T power to 8.9 W
NT1 ACE
ISDN Network Termination
Environmental
■Operating Temperature: 0° to 50°C, 32° to 122°F
■Storage Temperature: -20° to 70°C, -4° to 158°F
■Relative Humidity: Up to 95%, non-condensing
Approvals
■ FCC Part 15, Class B
■ FCC Part 68
■ UL
■ CUL
■ CSA
■ CSO3
Product Includes
■Manual
■NT1 ACE
■6 ft. telephone cable (RJ45 to RJ45)
■110 V wallmount power supply
Ordering Information
Equipment Part #
NT1 ACE & wallmount power supply 1203019L1
Printed in the U.S.A.
61203019L1-8D July 2002
©2002 ADTRAN, Inc. All rights reserved.
ADTRAN, Inc.
Attn: Enterprise Networks
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963-8000 voice
256 963-8699 fax
General Information
800 9ADTRAN
[email protected]
www.adtran.com
Pre-Sales
Technical Support
800 615-1176 toll-free
[email protected]
www.adtran.com/support
Where to Buy
877 280-8416 toll-free
[email protected]
www.adtran.com/where2buy
Post-Sales
Technical Support
888 423-8726
[email protected]
www.adtran.com/support
ACES Installation &
Maintenance Service
888 874-ACES
[email protected]
www.adtran.com/support
International Inquiries
256 963 8000 voice
256 963-6300 fax
[email protected]
www.adtran.com/international
For the regional office
nearest you, visit:
www.adtran.com/regional
To download a searchable
version of the ADTRAN
Enterprise Networks
Catalog, visit:
www.adtran.com/ecatalog
For more information regarding
ADTRAN’s export license, please visit
www.adtran.com/exportlicense
ADTRAN is an ISO 9001, ISO 14001,
and a TL 9000 certified supplier.