Advantech PCA-6108P6 Installation and operation manual

PCA-6108P6 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. PCA-6108P6 startup manual 2002610824
2. 3-pin ATX connector cable 1700030500
3. Screw M4*6L (15 pcs) 1939000410
4. 2-year quality warranty card 2190000902
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF
file.Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
Standard Functions
• PICMG 1.0 slots: PCA-6108P6 supports PICMG 1.0 CPU
boards
• ISA slots: One ISA slot
• 32-bit PCI: Five 32 bit/33 MHz PCI slots
• PICMG/PCI slot: One PICMG/PCI slot
Mechanical and Environment
• Dimension: 260mm x 200mm
• Power supply voltage: +12 V, +5 V, -12 V, -5 V, +3.3 V,
+5 VSB
• Power requirements: Refer to the CPU board, add-on
card, and peripherals
• Operating temperature: 0 ~ 60° C
• Weight: 0.398 kg
PCA-6108P6 Backplane: 8-slot BP for 8-slot Chassis, 1 ISA, 5 PCI,
1 PICMG, 1 PICMG/PCI
Startup Manual
The board has a number of jumpers that allow you to con-
figure your system to suit your application.
The table below lists the function of each of the jumpers and
connectors.
Jumpers and Connectors
Connectors
Label Function
PICMG1~PICMG2 PICMG1.0 CPU board slot
ISA3 ISA slot
PCI1~PCI3 32 bit / 33MHz PCI slot
SPCI1~SPCI3 32 bit / 33MHz PCI slot
VAT1 AT power connector
VATX1 ATX power connector
VBIG1 BIG 4-pin connector
VKB1~VKB3 KB-In or KB-Out connector
HCN1 PS-On, to CPU card for ATX
power signal
HCN3 +5 V and +12 V fan connector
Jumpers
Label Function
HCN1 ATX/AT Mode Selection
AT Mode
Remove default jumper
and connect 3-pin ATX
connector cable
ATX Mode
J3 PCI Bridge Voltage Selection
Setting 5V voltage to PCI slot
(default)
Setting 3.3V voltage to PCI
slot
1 2 3
3 6 9
1 4 7
3 6 9
1 4 7
Specications
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for the PCA-6108P6 Series.
Part No. 2002610824
Printed in China
5th Edition
July 2014
Jumpers and Connectors

2 PCA-6108P6 Startup Manual
Jumpers and Connectors
VATX1
Pin Name
13.3 V
2 3.3V
3 GND
4 5V
5 GND
6 5V
7 GND
8 Power OK
9 5VSB
10 12V
11 12V
12 3.3V
13 3.3V
14 -12V
15 GND
16 PSON
17 GND
18 GND
19 GND
20 N/C
21 5V
22 5V
23 5V
24 GND
VKB1 ~ VKB3
Pin Name
1 KBCLK
2 KBDAT
3 MSDAT
4 KB_GND
5 KB_VCC
6 MSCLK
VAT1
Pin Name
1 N/C
2 5V
3 12V
4 -12V
5 GND
6 GND
7 GND
8 GND
9 -5V
10 5V
11 5V
12 5V
HCN1
Pin Name
1 PSON
2 GND
3 5VSB
HCN3
Pin Name
1 12V
2 GND
3 5V
VBIG1
Pin Name
1 12V
2 GND
3 GND
4 5V

PCA-6108P6 Startup Manual 3
PCI Routing Tables
PCI Slot IDSEL
PCI interrupt pin route
INTA INTB INTC INDTD
PPCI1 AD31 or AD27 INTB INTC INTD INTA
PPCI2 AD30 or AD26 INTC INTD INTA INTB
PPCI3 AD29 INTD INTA INTB INTC
SPCI1 SAD20 INTA INTB INTC INTD
SPCI2 SAD21 INTB INTC INTD INTA
SPCI3 SAD22 INTC INTD INTA INTB
Board Diagram

4 PCA-6108P6 Startup Manual
Locating Connectors & Jumpers
SPCI3SPCI2SPCI1PCI3PCI2PCI1ISA1ISA2ISA3
VKB1
VKB2
VKB3
VAT1
VATX1
HCN1VBIG1HCN3PICMG1PICMG2
Notice:
When PCI card inserted in PCI1, it may conflict with the CPU card.
Note: When a PCI card is inserted in PCI1, it may conflict with the CPU card.

PCA-6108P6 Startup Manual 5
Board Dimensions