Advantech VEGA-2002 User manual

User Manual
VEGA-2002
4Kp60 HEVC Real-Time Encoder
Box

VEGA-2002 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2021
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgments
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident, or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. 2002200221 Edition 2
Printed in China March 2023

iii VEGA-2002 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Test conditions for passing included the
equipment being operated within an industrial enclosure. In order to protect the prod-
uct from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we
strongly recommend the use of CE-compliant industrial enclosure products. Please
contact your local supplier for ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions and Notes
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!

VEGA-2002 User Manual iv
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advant-
ech.com
Safety Precautions - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.,
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.

v VEGA-2002 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this user manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20 °C (-4 °F) OR ABOVE 60 °C
(140 °F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: THERE IS DANGER OF EXPLOSION IF THE BATTERY IS INCOR-
RECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT
TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD USED BAT-
TERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
17. The power supply cord(s) must be plugged into socket-outlet(s) that is/are pro-
vided with a suitable earth ground.
The sound pressure level at the operator's position according to IEC 704-1:1982
should be no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

VEGA-2002 User Manual vi

vii VEGA-2002 User Manual
Contents
Chapter 1 Product Introduction ...........................1
1.1 General Introduction.................................................................................. 2
1.2 Packing List............................................................................................... 2
1.3 Product Specifications............................................................................... 3
1.4 Software Architecture................................................................................ 4
1.5 Module Board Dimensions........................................................................ 5
Chapter 2 Installing VEGA-2002 ..........................7
2.1 Start Working with VEGA-2002............................................................... 10
2.1.1 Accessing the Module Across a Wired Network Using the Web
Browser....................................................................................... 10
2.1.2 Upgrading Firmware ................................................................... 10
2.1.3 LED for Video Source Connections ............................................ 11
Chapter 3 VEGA-2002 Web GUI .........................13
3.1 Live Page ................................................................................................ 14
3.2 System Page........................................................................................... 14
3.3 Broadcast ................................................................................................ 16
3.3.1 Wowza Live................................................................................. 16
3.3.2 ESPxMedia ................................................................................. 17
3.4 Stream Settings Page ............................................................................. 18
3.4.1 Customize - Video Settings......................................................... 19
3.4.2 Protocol....................................................................................... 20
3.5 Video/Audio............................................................................................. 24
3.6 Network Settings..................................................................................... 25
3.7 Record Settings....................................................................................... 26
3.8 OSD (Under Development) ..................................................................... 27
Chapter 4 How to Stream ...................................29
4.1 RTSP/RTP .............................................................................................. 30
4.2 MPEG-TS................................................................................................ 33
4.3 RTMP ...................................................................................................... 35
4.4 HTTP Live Streaming.............................................................................. 37
4.5 Zixi Live Streaming.................................................................................. 38
Appendix A Hardware/Software Support List......39
A.1 VEGA-2002 Video Encoding Performance ............................................. 40

VEGA-2002 User Manual viii

Chapter 1
1Product Introduction

VEGA-2002 User Manual 2
1.1 General Introduction
With video streaming thriving recently, new concepts such as social media and live
streaming are gaining popularity among video professionals. The VEGA-2002 is able
to leverage the ubiquity of mobile networks and the flexibility of over-the-top delivery
without jeopardizing video quality by providing a professional-grade 4K HEVC engine
that can be easily integrated as a portable broadcasting solution. The VEGA-2002 is
a great and powerful module to open new online media opportunities enabling live
event streaming even in the most challenging scenarios where a traditional outside
broadcasting setup is not a feasible option.
The VEGA-2002 is a small, low-power, real-time encoding module based on
Ambarella's video compression technology which supports UHD resolution with
HEVC and AVC codecs.
It captures 4K video content through the SDI or HDMI inputs, then encodes the video
content via Ambarella's H2 processor. The encoded video content can be streamed
to the cloud server with several protocols such as RTSP, RTMP, or even HLS. The
VEGA-2002 can create multiple output streams from a single video input and encode
it individually by using different codecs with different resolutions.
The VEGA-2002 offers a user-friendly HTTP interface and can be remotely controlled
by using a web-based Common Gate Interface (CGI). It supports multiple streaming
protocols that are commonly used by CDNs, which make it easier for users to deliver
their video over-the-top.
1.2 Packing List
Before you begin installing your card, please make sure that the following items have
been shipped:
1 VEGA-2002
1 Power Adapter
If any of these items are missing or damaged, please contact to your distributor or
sales representative immediately.
Note! Acrobat Reader is required to view any PDF file. Acrobat Reader can be
downloaded at: http://www.adobe.com/Products/acrobat/readstep2

3 VEGA-2002 User Manual
Chapter 1 Product Introduction
1.3 Product Specifications
3GS 4X3GS 12GS
Video Input
Format
Channels/
interface
1x 3G-SDI or HDMI
2.0, up to 4Kp60 8/10
bit 4:2:2
4 x 3G-SDI, up to
4Kp60 8/10 bit 4:2:2
1 x 12G-SDI or
HDMI2.0, up to
4Kp60 8/10 bit 4:2:2
Video formats
HDMI 2.0 Interface
3840x2160:
60p/59.94p/ 50p/30p /
29.97p/25p
1920x1080: 60p/
59.94p/50p/30p/
29.97p/25p/24p
1920x1080: 60i/
59.94i/50i
1280x720: 60p/
59.94p/50p
BNC (3GS-SDI) Inter-
face
1920x1080: 60p/
59.94p/50p/30p/
29.97p/25p
1920x1080:
60i/59.94i/50i
1280x720: 60p/
59.94p/50p/30p/
29.97p/25p
BNC (3GS-SDI) Inter-
face
3840x2160: 60P/
59.94p/50p/30p/
29.97p
1920x1080: 60p/
59.94p/50p/30p/
29.97p/25p
1920x1080:
60i/59.94i/50i
1280x720: 60p/
59.94p/50p/30p/
29.97p/25p
(Note: 3840x2160
support by 4 x 3G-
SDI Quad Link)
HDMI 2.0 Interface
3840x2160:
60p/59.94p/ 50p/30p /
29.97p/25p
1920x1080: 60p/
59.94p/50p/30p/
29.97p/25p/24p
1920x1080:
60i/59.94i/50i
1280x720:
60p/59.94p/50p
BNC (12G-SDI) Inter-
face
3840x2160:
60P/59.94p/50p/30p/
29.97p
1920x1080: 60p/
59.94p/50p/30p/
29.97p/25p
1920x1080:
60i/59.94i/50i
1280x720: 60p/
59.94p/50p/30p/
29.97p/25p
Compression
Compression HEVC (H.265) / AVC (H.264) up to 4Kp60
AVC or HEVC
profile
AVC BP/MP/HP Level 5.1
HEVC Main Level 5.1
HEVC Tier Main
Bit Rate 64kbps ~ 32Mbps
Bit Depth 8-, 10-bit (only HEVC)
Chroma
Sampling
Format
4:2:0
Bit Rate
Control CBR
Audio Input &
Compression
Channels
Line-In: stereo
3G-SDI: 4 stereo
HDMI: 4 stereo
Line-In: stereo
3G-SDI: 2 stereo
(Only supports the
SDI port next to the
line in)
Line-In: stereo
12G(3G)-SDI: 2 ste-
reo
HDMI: 2 stereo
Audio
Compression
Format
AAC-LC, AAC-HE, AAC-HEv2
Sampling
Rates
HDMI/SDI: 44.1/48Khz-16-bit
Line in: 32/44.1/48Khz-16-bit
Self View Video Output
Frame PAL

VEGA-2002 User Manual 4
1.4 Software Architecture
VEGA-2002 provides a Web GUI to control encoding, streaming, recording, and
other parameters. Below is the software architecture for reference.
Video Stream
Features
Dynamic
Video Stream
Resolution
Change
Yes
Streaming
Protocol RTSP/RTP/RTMP/HLS/TS over IP/SRT/NDI HX2 (optional)
GOP
Definition I, IP, IPB, IBBP
Module
Characteristics
Operating
System Embedded Linux
Management
& Control
Interface
Remote from the Web GUI interface
Power
Consumption
(Based on
4Kp60 Video
Encoding)
10.7W 17.8W 9.4W
Power Input DC12V
System
Dimensions 130 x 48x 94.1(mm)
Environmental
Operating
Temperature 0 °C to 40 °C
Storage
Temperature -40 °C to 70 °C
Operating
Humidity 50 to 95% (non-condensing)
Non-
Operating
Humidity
50 to 95% (non-condensing)

5 VEGA-2002 User Manual
Chapter 1 Product Introduction
1.5 Module Board Dimensions
VEGA-2002-12G SDI/HDMI
VEGA-2002-4X3G SDI
VEGA-2002-3G SDI/HDMI

VEGA-2002 User Manual 6

Chapter 2
2Installing VEGA-2002

VEGA-2002 User Manual 8

9 VEGA-2002 User Manual
Chapter 2 Installing VEGA-2002
Follow these steps:
1. Connect a video source to SDI or HDMI video inputs.
2. Connect the power adapter to the power jack. (When the power is on, the power
LED is blue)
3. Connect the LAN cable to the Internet HUB. Please make sure your PC's LAN
cable is also connected to the HUB. (If you want your PC to serve as a
decoder.)
4. Connect your USB flash drive to USB1 or USB2 for the recording function.

VEGA-2002 User Manual 10
2.1 Start Working with VEGA-2002
2.1.1 Accessing the Module Across a Wired Network Using the Web
Browser
1. The default IP address of the Ethernet port is 192.168.1.10.
2. Please set up your PC to the same domain to connect VEGA-2002
(192.168.1.x).
3. Start the web browser on your PC and type in 192.168.1.10 in the URL address
bar.
4. Enter your username and password to log into the Web UI. VEGA-2002 has a
default username of admin and default password of admin.
5. The Live page should be displayed as below.
2.1.2 Upgrading Firmware
The VEGA-2002 firmware can be automatically updated by connecting a USB flash
drive to VEGA-2002 using the USB port.
1. Prepare an empty USB flash drive (FAT32).
2. Download or get the firmware file from your Advantech contact.
3. Place the firmware file, “vega2002_XXXX.upd.xz” into the root directory of your
USB flash drive.
4. Power-OFF the VEGA-2002. Insert your USB flash drive to the VEGA-2002 and
remove other devices (LAN & video input sources, but keep the power adapter).
5. Power-ON the VEGA-2002. The upgrade will start automatically.
6. Once the upgrade is finished, the power button LED will stop blinking and stay
green.
7. Please remember to remove the USB flash drive. Then, execute a power cycle
by pressing the power button.
8. Check the software version in Web, System → Information → Software Version.

11 VEGA-2002 User Manual
Chapter 2 Installing VEGA-2002
2.1.3 LED for Video Source Connections
There are two LEDs which can indicate the connection status of video source. Below
is the LED behavior table for reference.
LED Status Table
LED Location
–VEGA-2002-12GS
Note! Users can also use the Web GUI to upgrade the Firmware. Please refer
to Chapter 3.2.
Video Source Not Connected Connected
HDMI(FPGA_D1) Light-on Light-blink
SDI(FPGA_D2) Light-on Light-off

VEGA-2002 User Manual 12
–VEGA-2002-4X3GS
–VEGA-2002-3GS