Advantech Qseven SOM-3567 User manual

User Manual
SOM-3567

SOM-3567 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2017
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. 2006356700 Edition 1
Printed in China February 2017

iii SOM-3567 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FM
This equipment has passed the FM certification. According to the National Fire Pro-
tection Association, work sites are classified into different classes, divisions and
groups, based on hazard considerations. This equipment is compliant with the speci-
fications of Class I, Division 2, Groups A, B, C and D indoor hazards.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages

SOM-3567 User Manual iv
Warnings, Cautions and Notes
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advan-
tech.com
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
1 x SOM-3567 CPU module
1 x Heatspreader (1960076583N000)
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.

v SOM-3567 User Manual
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

SOM-3567 User Manual vi
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.

vii SOM-3567 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
Table 1.1: Acronyms.................................................................... 2
1.2 Functional Block Diagram ......................................................................... 3
1.3 Product Specification ................................................................................ 4
1.3.1 Compliance ................................................................................... 4
1.3.2 Feature List ................................................................................... 4
1.3.3 Processor System......................................................................... 4
1.3.4 Memory ......................................................................................... 5
1.3.5 Graphics........................................................................................ 5
1.3.6 2D Acceleration............................................................................. 5
1.3.7 3D Acceleration............................................................................. 5
1.3.8 Other API support ......................................................................... 5
1.3.9 Media Hardware Decoder ............................................................. 5
1.3.10 Media Hardware Encoder ............................................................. 5
1.3.11 Media Content Protection ............................................................. 5
1.3.12 Display Interface ........................................................................... 6
1.3.13 Multiple-Display............................................................................. 6
1.3.14 Expansion Interface ...................................................................... 6
1.3.15 Serial Bus...................................................................................... 7
1.3.16 I/O ................................................................................................. 7
1.3.17 Power Management...................................................................... 8
1.3.18 Environment.................................................................................. 9
1.3.19 MTBF ............................................................................................ 9
1.3.20 OS Support ................................................................................... 9
1.3.21 Advantech iManager ..................................................................... 9
1.3.22 Advantech WISE-PaaS/RMM ....................................................... 9
1.3.23 Power Consumption & Performance........................................... 10
1.3.24 Selection Guide w/ P/N ............................................................... 10
1.3.25 Packing list.................................................................................. 10
1.3.26 Development Board .................................................................... 10
1.3.27 Optional Accessory ..................................................................... 10
1.3.28 Pin Description............................................................................ 11
Chapter 2 Mechanical Information ....................13
2.1 Board Information.................................................................................... 14
Figure 2.1 Board chips identify – Front...................................... 14
Figure 2.2 Board chips identify – Back ...................................... 14
2.2 Mechanical Drawing................................................................................ 15
Figure 2.3 Board Mechanical Drawing - Front ........................... 15
Figure 2.4 Board Mechanical Drawing – Back........................... 16
Figure 2.5 Board Mechanical Drawing – Side ........................... 16
2.3 Assembly Drawing .................................................................................. 17
Figure 2.6 Assembly Drawing.................................................... 17
2.4 Assembly Drawing .................................................................................. 18
Chapter 3 AMI BIOS ............................................19
3.1 Introduction ............................................................................................. 20
Figure 3.1 Setup program initial screen..................................... 20
3.2 Entering Setup ........................................................................................ 20
3.2.1 Main Setup.................................................................................. 20

SOM-3567 User Manual viii
Figure 3.2 Main setup screen .................................................... 21
3.2.2 Advanced BIOS Features Setup................................................. 21
Figure 3.3 Advanced BIOS features setup screen .................... 22
Figure 3.4 Trusted Computing................................................... 22
Figure 3.5 ACPI Settings ........................................................... 23
Figure 3.6 Intel(R) Smart Connect Technology ......................... 24
Figure 3.7 iManager Configuration ............................................ 24
Figure 3.8 Serial Port 1 Configuration ....................................... 25
Figure 3.9 Serial Port 2 Configuration ....................................... 26
Figure 3.10 ................................................................................. 27
Figure 3.11Serial Port Console Redirection ............................... 28
Figure 3.12CPU Configuration ................................................... 29
Figure 3.13Socket 0 CPU Information........................................ 30
Figure 3.14CPU Thermal Configuration ..................................... 30
Figure 3.15PPM Configuration ................................................... 31
Figure 3.16IDE Configuration ..................................................... 32
Figure 3.17Miscellaneous Configuration .................................... 33
Figure 3.18LPSS & SCC Configuration...................................... 34
Figure 3.19Network Stack Configuration.................................... 35
Figure 3.20CSM Configuration ................................................... 36
Figure 3.21SDIO Configuration .................................................. 37
Figure 3.22USB Configuration.................................................... 38
Figure 3.23Security Configuration .............................................. 39
Figure 3.24Intel I210 Gigabit Network Connections ................... 40
Figure 3.25NIC Configuration..................................................... 41
3.2.3 Chipset........................................................................................ 42
Figure 3.26Chipset Setup........................................................... 42
Figure 3.27North Bridge ............................................................. 43
Figure 3.28Intel IGD Configuration............................................. 44
Figure 3.29Graphics Power Management Control ..................... 45
Figure 3.30LCD Control.............................................................. 46
Figure 3.31South Bridge............................................................. 47
Figure 3.32Azalia HD Audio Configuration................................. 48
Figure 3.33USB Configuration.................................................... 49
Figure 3.34PCI Express Configuration ....................................... 50
3.2.4 Security Setting........................................................................... 51
Figure 3.35Security Setup .......................................................... 51
3.2.5 Boot Settings .............................................................................. 52
Figure 3.36Boot Setting.............................................................. 52
3.2.6 Save & Exit ................................................................................. 53
Figure 3.37Save & Exit............................................................... 53
Chapter 4 S/W Introduction & Installation........ 55
4.1 S/W Introduction ..................................................................................... 56
4.2 Driver Installation .................................................................................... 56
4.2.1 Windows Driver Setup ................................................................ 56
4.2.2 Other OS..................................................................................... 56
4.3 Advantech iManager ............................................................................... 56
4.3.1 Control ........................................................................................ 57
4.3.2 Display ........................................................................................ 57
4.3.3 Monitor........................................................................................ 58
4.3.4 Power Saving.............................................................................. 58
Appendix A Pin Assignment................................. 59
A.1 SOM-3567 Type 6 Pin Assignment......................................................... 60

ix SOM-3567 User Manual
Appendix B Watchdog Timer ................................63
B.1 Programming the Watchdog Timer ......................................................... 64
Appendix C Programming GPIO ...........................65
C.1 GPIO Register......................................................................................... 66
Appendix D System Assignments ........................67
D.1 System I/O Ports ..................................................................................... 68
Table D.1: System I/O ports....................................................... 68
D.2 DMA Channel Assignments .................................................................... 69
Table D.2: DMA channel assignments....................................... 69
D.3 Interrupt Assignments ............................................................................. 70
Table D.3: Interrupt assignments ............................................... 70
D.4 1st MB Memory Map ............................................................................... 71
Table D.4: 1st MB memory map ................................................ 71

SOM-3567 User Manual x

Chapter 1
1General Information
This chapter gives background
information on the SOM-3567
Qseven CPU Module.
Sections include:
Introduction
Functional Block Diagram
Product Specification

SOM-3567 User Manual 2
1.1 Introduction
SOM-3567, equipped with Intel® native extended temperature Atom E3800® series
& Celeron® J1900 single-chip processors, offers powerful graphic performance and
computing performance in a compact size of70 x 70 mm in an ultra low profile
Qseven form factor.
Together with the “onboard” dual channel DDR3L-1333, up to 8GB memory, and
optional “onboard” eMMC, up to 32GB, SOM-3567 is the most suitable solution for in-
vehicle, portable medical, and industrial mobile devices in harsh environments.
Multi-display Output and 3D/Hardware Acceleration
SOM-3567 can support simultaneous display in dual channel LVDS and DDI inter-
face which is configurable to HDMI, DVI, and DisplayPort. It also enables excellent
3D/hardware acceleration output via DX11, OGL3.2, OCL1.2, and H.264/
AVC,MPEG2, MVC HW Decode/Encode, and VP8, WMV9, VC-1 Decode.
Rich I/O Connectivity
SOM-3567 module provides 3 PCIex1 Gen.2 5.0 GT/s by default and an option for 1
PCIe x4 without GbE support, allowing huge bandwidth for data transmission. It also
features GbE, USB 3.0, 6 USB2.0 for maximum connectivity.
Table 1.1: Acronyms
Term Define
AC’97 Audio CODEC (Coder-Decoder)
ACPI Advanced Configuration Power Interface – standard to implement
power saving modes in PC-AT systems
BIOS
Basic Input Output System – firmware in PC-AT system that is
used to initialize system components before handing control over
to the operating system
CAN
Controller-area network (CAN or CAN-bus) is a vehicle bus stan-
dard designed to allow microcontrollers to communicate with each
other within a vehicle without a host computer
DDI Digital Display Interface – containing DisplayPort, HDMI/DVI, and
SDVO
EAPI
Embedded Application Programmable Interface
Software interface for COM Express® specific industrial function
System information
Watchdog timer
I2C Bus
Flat Panel brightness control
User storage area
GPIO
GbE Gigabit Ethernet
GPIO General purpose input output
HDA
Intel High Definition Audio (HD Audio) refers to the specification
released by Intel in 2004 for delivering high definition audio that is
capable of playing back more channels at higher quality than
AC’97
I2C
Inter Integrated Circuit – 2 wire (clock and data) signaling scheme
allowing communication between integrated circuit, primarily used
to read and load register values

3 SOM-3567 User Manual
Chapter 1 General Information
1.2 Functional Block Diagram
ME Management Engine
PC-AT “Personal Computer – Advanced Technology” – an IBM trademark
term used to refer to Intel based personal computer in 1990s
PEG PCI Express Graphics
RTC
Real Time Clock – battery backed circuit in PC-AT systems that
keeps system time and date as well as certain system setup
parameters
SPD Serial Presence Detect – refers to serial EEPROM on DRAMs that
has DRAM Module configuration information
TPM Trusted Platform Module, chip to enhance the security features of a
computer system
UEFI Unified Extensible Firmware Interface
WDT Watch Dog Timer
Table 1.1: Acronyms
Qseven MXM2.0 Conn. 230P
Intel Atom/ Celeron
SoC
1066 /1333 MHz up to 4GB
DDR3L Channel 1 DDI0
HDA
SATA Port 0, 1
SMBus
LPC BUS
WDT/ I
2
C/ FAN/ UART
SPI
USB 3.0 Port 0
USB 2.0 Port 0~2
1066 /1333 MHz up to 4GB
DDR3L Channel 2
eMMC 4.51 Up to 32GB
(Option)
SPI BIOS
eDP to LVDS
USB Hub
DDI1 LVDS
USB 2.0 Port 3~5
USB 2.0 Port 3
PCIe Port 0~2 (Optional ports while remove Ethernet)
Giga LAN
Embedded
Controller
Ethernet
PCIe Port 3 (optional)

SOM-3567 User Manual 4
1.3 Product Specification
1.3.1 Compliance
Qseven® Revision 2.1
70 x 70 mm
1.3.2 Feature List
1.3.3 Processor System
Feature
Type Feature
Qseven Features
SOM-3567
Features
Minimum
Configuration
Maximum
Configuration
Display
LVDS channels/
embedded DisplayPort
0
0
Dual Channel
24-bit
2
Dual Channel
24-bit
0
DisplayPort/TMDS 0 1 1
Expansion
PCI Express Lanes 1 (x1 link) 4 3 (4 while
remove LAN)
LPC 1 1 1
HD Audio/AC’97/I2C 0 1 1 (HD Audio)
Serial
SMBus 1 1 1
I2C Bus 1 1 1
CAN Bus 0 1 0
I/O
Serial ATA Channels 0 2 2
USB2.0 ports 4 8 6
USB3.0 ports 0 2 1
SPI Bus 0 1 1
Watchdog Trigger 1 1 1
Power Button 1 1 1
Power Good 1 1 1
Reset Button 1 1 1
LID Button 0 1 1
Sleep Button 0 1 1
Suspend to RAM
(S3 mode) 011
Wake 0 1 1
Battery Low Alarm 0 1 1
Thermal Control 0 1 1
FAN Control 0 1 1
CPU Std. Freq. Max. Turbo Freq. Core/Thread LLC Cache TDP(W)
Celeron J1900 2.0 GHz 2.42 GHz 4/4 2MB 10W
Atom E3845 1.91 GHz 4/4 2MB 10W
Atom E3827 1.75 GHz 2/2 1MB 8W
Atom E3825 1.33 GHz 2/2 1MB 6W
Atom E3815 1.46 GHz 1/1 512KB 5W

5 SOM-3567 User Manual
Chapter 1 General Information
1.3.4 Memory
1.3.5 Graphics
1.3.6 2D Acceleration
Yes
1.3.7 3D Acceleration
DirectX 11.1/10/9 (Win 10 Enterprise / Win 8.1/ Win 7/WES 7)
OpenGL 4.0 (Win 8.1/Win 7/WES 7/Win10 Enterprise/Win10 IoT Core)
OpenGL-ES2.0 (WEC7)
OpenGL3.2/OpenGL-ES2.0 (Linux)
1.3.8 Other API support
OpenGL-ES1.1
1.3.9 Media Hardware Decoder
H.264(AVC), VC-1, MPEG2, MVC, VP8, MJPEG
1.3.10 Media Hardware Encoder
H.264(AVC), MPEG2, MVC
1.3.11 Media Content Protection
HDCP 1.4/2.1 over wired display (HDMI, DisplayPort and Embedded DisplayPort)
CPU Atom E3845 Atom E3827 Atom E3825 Atom E3815 Celeron J1900
Freq. 1.91GHz 1.75GHz 1.33GHz 1.46GHz 2.0GHz
Core 4C 2C 2C 1C 4C
Onboard
Memory
DDR3L-1333
Dual channel
DDR3L-1333
Dual channel
DDR3L-1066
Single channel
DDR3L-1066
Single channel
DDR3L-1333
Dual channel
Max.
capacity Up to 8GB Up to 8GB Up to 4GB Up to 4GB Up to 8GB
ECC
Support Not supported Not supported Not supported Not supported Not supported
CPU Atom E3845 Atom E3827 Atom E3825 Atom E3815 Celeron J1900
Freq. 1.91GHz 1.75GHz 1.33GHz 1.46GHz 2.0GHz
Core 4C 2C 2C 1C 4C
GFX
Controller Intel Gen 7 Intel Gen 7 Intel Gen 7 Intel Gen 7 Intel Gen 7
Base
Frequency 542 MHz 542 MHz 533 MHz 400 MHz 688 MHz
Burst
Frequency 792 MHz 792 MHz N/A N/A 854 MHz
Graphics
Memory Up to 1720MB DVMT

SOM-3567 User Manual 6
1.3.12 Display Interface
DDI1: Support dual channel 18/24-bit LVDS
DDI0: Support configurable DisplayPort (DP), HDMI, or DVI
1.3.13 Multiple-Display
1.3.14 Expansion Interface
1.3.14.1 PCIe
SOM-3567 provides default 3 PCIe x1 ports which support PCI Express Gen.2 with a
maximum speed of 5.0 Gb/s and backward compatible to PCI Express Gen.1 2.5 Gb/
s. It can support up to 4 ports PCIe x1 while remove GbE.
Furthermore, SOM-3567 provides alternative configurations to satisfy different appli-
cations as below. For different configurations, please contact Advantech contact for
optional support that might need custom BOM and BIOS.
LVDS HDMI DP DVI
Standard - HDMI1.4a DP1.1a -
Max.
Resolution
1920x1080 @
60Hz
1920 x 1080 @
60Hz, 24 bpp
2560 x 1600 @
60Hz, 24 bpp
1920 x 1080 @
60Hz
HDCP N/A 1.4 1.4 1.4
HD Audio N/A Yes Yes N/A
Single Display Dual Display
LVDS or DDI0 LVDS+DDI0
LVDS LVDS 1920x1080 1920x1080
DDI0
HDMI
DVI 1920 x 1080 @ 60Hz 1920 x 1080 @ 60Hz
DP 2560x1600@60Hz 2560x1600@60Hz
PCIe P0 PCIe P1 PCIe P2 PCIe P3 GbE
Default x1 x1 x1 Yes
Option x2 x1 Yes
Option x2 x2 No
Option x4 No
Note! The above table may not include all possible configurations. If you have
further configurations or need support, please contact your regional, cor-
responding FAE.

7 SOM-3567 User Manual
Chapter 1 General Information
1.3.14.2 HD Audio Interface
Supports Intel HD Audio interface integrated in Intel Baytrail SoC.
1.3.14.3 LPC
Supports Low Pin Count (LPC) 1.1 specification, without DMA or bus mastering.
Allow to connect Super I/O, embedded controller, or TPM. LPC clock is 25MHz.
1.3.15 Serial Bus
1.3.15.1 SMBus
Supports SMBus 2.0 specification with Alert pin.
1.3.15.2 I2C Bus
Supports I2C bus 8-bit and 10-bit address modes, at both 100KHz and 400KHz.
1.3.16 I/O
1.3.16.1 Gigabit Ethernet
On-module Intel i210AT supports IEEE802.3 for 1000BASE-T, 100BASE-TX, and
10BASE-T (802.3, 802.3u, and 802.3ab). Supports IPv4, IPv6, TCP/UDP, SCTP,
ARP, Neighbor Discovery, EUI-64.
1.3.16.2 SATA
Supports 4 ports SATA Gen3 (6.0 Gb/s), backward compliant to SATA Gen2 (3.0 Gb/
s) and Gen1 (1.5 Gb/s). Maximum data rate is 600 MB/s. Supports AHCI 1.3.1 mode
(not support IDE mode).
1.3.16.3 USB3.0/USB2.0
1. Supports 1 port USB3.0 Super Speed (SS, 5.0 Gbps) on xHCI.
2. Supports 6 ports USB2.0 High Speed (HS, 480 Mbps) compliant to Full
Speed(FS) on either EHCI or xHCI controller.
1.3.16.4 SPI Bus
Supports BIOS flash only. SPI clock can be 50MHz, 33MHz, or 20MHz, capacity up
to 16MB.
1.3.16.5 GPIO
Qseven v2.1 defines GPIO as multi-function pins with the LPC Bus. Because the
LPC Bus can still used for various applications, we don’t do use the multiplex function
but provide the LPC Bus only.
However, we use Qseven v2.1 MFG_NC[3:0] reserve pins to implement 4 GPIO pins
for designs which still need it. If you have such inquiries please contact your FAE for
further help.
Qseven v2.1
USB3.0/2.0
USB2.0
HS P0 HS P1 HS P2 HS P3 HS P4 HS P5 HS P6 HS P7
USB3.0
SS P2 SS P0 SS P1
SOM-3567 SoC HS P0 HS P1 HS P2 SS P0
Hub HS P3 HS P4 HS P5
Qseven v2.1 USB OC# USB_0_1_OC# USB_2_3_OC# USB_4_5_OC# USB_6_7_OC#
SOM-3567 USB3.0 SS P0
USB2.0 HS P0 HS P1 HS P2 HS P3 - - - -

SOM-3567 User Manual 8
1.3.16.6 Watchdog
Supports multi-level watchdog time-out output. Provides 1-65535 level, from 100ms
to 109.22 minutes interval.
1.3.16.7 Serial port
1 ports 4-wire serial port supports 16550 UART compliance. The 4-wire include TX,
RX, CTS, and RTS signals.
There are additional 1 port 4-wires serial port leverage Qseven v2.1 MFG_NC[3:0]
reserve pins which multi-function with GPIO.
–Programmable FIFO or character mode
–16-byte FIFO buffer on transmitter and receiver in FIFO mode
–Programmable serial-interface characteristics: 5, 6, 7, or 8-bit character
–Even, odd, or no parity bit selectable
–1, 1.5, or 2 stop bit selectable
–Baud rate up to 115.2K
1.3.16.8 BIOS
BIOS chip is on module by default. Also allows the user to place the BIOS chip on the
carrier board with appropriate design and a pull-down to GND on BIOS_DISABLE#
pin.
1.3.17 Power Management
1.3.17.1 Power Supply
Supports both ATX and AT power modes. VSB is for suspend power and can be an
option if not requiring standby (suspend-to-RAM) support. RTC Battery may be an
option if keeping time/date is not required.
VCC: 5V +/- 5%
VSB: 5V +/- 5% (Suspend power)
RTC Battery Power: 2.0V – 3.3V
1.3.17.2 Power Sequence
According to Qseven R2.1 specification.
1.3.17.3 Wake Event
Various wake-up events allow the user to apply different scenarios.
Wake-on-LAN(WOL): Wake to S0 from S3/S4/S5
USB Wake: Wake to S0 from S3/S4
PCIe Device Wake: depends on user inquiry and may need customized BIOS
LPC Wake: depends on user inquiry and may need customized BIOS
1.3.17.4 Advantech S5 ECO Mode (Deep Sleep Mode)
Advantech iManager provides additional feature to allow the system to enter a very
low suspend power mode – S5 ECO mode. In this mode, the module will cut all
power including suspend and active power to the chipset and keep an on-module
controller active. Therefore, only under 50mW power will be consumed which means
the battery pack can last longer. With this mode is enabled in BIOS, the system (or
module) only allows a power button to boot rather than others such as WOL.
Note! If system COMS is cleared, we strongly suggest to go to the BIOS setup
menu and load default settings at the first time of boot up.

9 SOM-3567 User Manual
Chapter 1 General Information
1.3.18 Environment
1.3.18.1 Temperature
Operating: 0 ~ 60° C (32 ~ 140° F)
Storage: -40 ~ 85° C (-40 ~ 185° F
1.3.18.2 Humidity
Operating: 40° C @ 95% relative humidity, non-condensing
Storage: 60° C @ 95% relative humidity, non-condensing
1.3.18.3 Vibrations
IEC60068-2-64: Random vibration test under operation mode, 3.5Grms
1.3.18.4 Drop Test (Shock)
Federal Standard 101 Method 5007 test procedure with standard packing
1.3.18.5 EMC
CE EN55022 Class B and FCC Certifications: validate with standard development
boards in Advantech chassis
1.3.19 MTBF
Please refer to Advantech SOM-3567 Series Reliability Prediction Report No: TBC.
1.3.20 OS Support
The mission of Advantech Embedded Software Services is to "Enhance quality of life
with Advantech platforms and Microsoft Windows embedded technology." We enable
Windows Embedded software products on Advantech platforms to more effectively
support the embedded computing community. Customers are freed from the hassle
of dealing with multiple vendors (Hardware suppliers, System integrators, Embedded
OS distributor) for projects. Our goal is to make Windows Embedded Software solu-
tions easily and widely available to the embedded computing community.
To install the drivers for Linux or other OS, please connect to internet and browse the
browse the website http://support.advantech.com.tw to download the setup file.
1.3.21 Advantech iManager
Supports APIs for GPIO, smart fan control, multi-stage watchdog timer and output,
temperature sensor, hardware monitor, etc. Follows the PICMG EAPI 1.0 specifica-
tion and provides backward compatibility.
1.3.22 Advantech WISE-PaaS/RMM
An IoT device management platform which is:
Reliable
Remote monitoring and management for all connected devices with access control
Integration of 3rd party protection and recovery solution and support server redun-
dancy for service availability.
Scalable
Supports up to 1000 IoT device connections
Supports 3 layers of server hierarchy and unlimited sub-servers

SOM-3567 User Manual 10
Extensible
Restful API web service, Node-red & WISE Agent framework allows users to make
further development, customization, and integration based on their applications.
1.3.23 Power Consumption & Performance
For reference performance or benchmark data that compares with other modules,
please refer to: “COM Performance Table” and “COM Power Consumption List”
http://www2.advantech.com/embedded-boards-design-in-services/com/refer-
ence-document.aspx
1.3.24 Selection Guide w/ P/N
1.3.25 Packing list
1.3.26 Development Board
1.3.27 Optional Accessory
Part No. CPU Freq. Core CPU
TDP Memory eMMC Thermal Solution
Operating
Temperature
SOM-
3567CS0C-
S9A1E
Atom
E3845
1.91
GHz 4C 10W 4GB NA Passive 0 ~ 60° C
SOM-
3567BS0C-
S7A1E
Atom
E3827
1.75
GHz 2C 8W 2GB NA Passive 0 ~ 60° C
SOM-
3567CS0C-
U0A1E
Celeron
J1900
2.0
GHz 4C 10W 4GB NA Passive 0 ~ 60° C
SOM-
3567CMBX-
S9A1E
Atom
E3845
1.91
GHz 4C 10W 4GB 32GB Passive -40~85° C
SOM-
3567BS0X-
S7A1E
Atom
E3827
1.75
GHz 2C 8W 2GB NA Passive -40~85° C
Part No. Description Quantity
- SOM-3567 Qseven CPU Module 1
1960076583N000 Heatspreader 1
Part No. Description Quantity
SOM-DB3520-00A1E Qseven Development Board 1
Part No. Description
1960058145N001 Semi-Heatsink, 70L x 63W x 13.2H (0 ~ 60° C)
1960061089N001 Semi-Heatsink, 70L x 63W x 34H (-40 ~ 85° C)