Advantech WISE-2211 Installation and operation manual

WISE-2211 Startup Manual 1
Thank you for purchasing the WISE-2211 module. This
quick start guide is intended to help you deploy your new
module. The guide contains basic information on the power
and application wiring.
Should you require additional instructions, please refer to
the user manual.
WISE-2211 is self-powered sensor node, power source
comes from an analog input which is connected to a
4~20mA sensor transmitter. In other words, WISE-2211
measures data and gets power current from a connected
sensor transmitter.
• 1 x WISE-2211 module
• 1 x Mounting bracket
• 1 x Quick start manual
• 1 x China RoHS declaration (UA series only)
*Antenna should be ordered as per required frequency
range.
WISE-2211
LPWAN Self-powered Sensor Node
Startup Manual
Analog Input current: Direct Current
(4~20mA)
1. Connect the module to your computer via the micro-
USB port.
2. Open WISE Studio and click Go To Conguration.
I/O Pinout & Application WiringOverview
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service:
https://www.advantech.com/support/
This startup manual is for WISE-2211.
Part No. 2043221101
Printed in Taiwan
2nd Edition
Nov 2019
Input Power Requirements
Packaging List
Quick Start

2 WISE-2211 Startup Manual
3. Click Connect to link the WISE-2211 and the web conguration page will appear.
4. Use the web conguration tool in WISE Utility or click Open In Browser to open the web conguration in any browser
(Google Chrome is recommended).
5. Click Information to check the status of the module or to congure the module.
USB cable is only for conguration.
Quick Start
Note