Aerotech HexGen HEX300-230HL User manual

Revision 2.00
HexGen®HEX300-230HL Hexapod Six-DOF
Positioning System
HARDWAREMANUAL

GLOBALTECHNICALSUPPORT
Go to the Global Technical Support Portal for information and support about your
Aerotech, Inc. products. The website supplies software, product manuals, Help files,
training schedules, and PC-to-PC remote technical support. If necessary, you can
complete Product Return (RMA) forms and get information about repairs and spare
or replacement parts. To get help immediately, contact a service office or your sales
representative. Include your customer order number in your email or have it
available before you call.
This manual contains proprietary information and may not be reproduced,
disclosed, or used in whole or in part without the express written permission of
Aerotech, Inc. Product names mentioned herein are used for identification purposes
only and may be trademarks of their respective companies.
Copyright © 2016-2021, Aerotech, Inc., All rights reserved.

Table of Contents
HexGen® HEX300-230HL Hexapod Six-DOF Positioning System 1
Table of Contents 3
List of Figures 4
List of Tables 5
Safety Procedures and Warnings 7
EU Declaration of Incorporation 9
Chapter 1: Overview 11
1.1. Environmental Specifications 12
1.1.1. Accuracy and Temperature Effects 12
1.2. Basic Specifications 13
1.3. Understanding Basic HEX300-230HL Operation 14
1.3.1. Hexapod Axes 14
1.3.2. Strut Limits and Hexapod Range 14
1.3.3. Homing 15
Chapter 2: Mechanical Specifications and Installation 17
2.1. Unpacking and Handling the Hexapod 17
2.2. Dimensions 19
2.3. Securing the Hexapod to the Mounting Surface 20
2.4. Attaching the Payload to the HEX300-230HL 22
Chapter 3: Electrical Specifications and Installation 25
3.1. Motor and Feedback Connectors 26
3.2. Motor and Feedback Wiring 29
3.3. Motor and Feedback Specifications 31
3.4. Machine Direction 33
3.5. Feedback Phasing 34
Chapter 4: Maintenance 37
4.1. Service and Inspection Schedule 37
4.2. Cleaning and Lubrication 37
4.3. Troubleshooting 38
Appendix A: Warranty and Field Service 39
Appendix B: Revision History 41
Index 43
HEX300-230HL Hardware Manual Table of Contents
www.aerotech.com 3

List of Figures
Figure 1-1: HEX300-230HL Callouts 11
Figure 1-2: Axis Orientation 14
Figure 2-1: Lifting and Shipping Brackets 18
Figure 2-2: HEX300-230HL Dimensions 19
Figure 2-3: Mounting Hole Locations 21
Figure 2-4: HEX300-230HL Vertical Load Capabilities 22
Figure 2-5: HEX300-230HL Horizontal Load Capabilities 23
Figure 2-6: HEX300-230HL Inverted Load Capabilities 23
Figure 3-1: Motor and Feedback Wiring (-E1 Connector) 29
Figure 3-2: Motor and Feedback Wiring (-E2 Connector) 30
Figure 3-3: Machine Direction 33
Figure 3-4: Hall Phasing 34
Figure 3-5: Encoder Phasing Reference Diagram (Standard) 35
List of Figures HEX300-230HL Hardware Manual
4 www.aerotech.com

List of Tables
Table 1-1: Model Options 11
Table 1-2: Environmental Specifications 12
Table 1-3: HEX300-230HL Series Specifications 13
Table 2-1: Stage to Mounting Surface Hardware 21
Table 3-1: -E1 Option Motor and Feedback Pinout 27
Table 3-2: Mating Connector Part Numbers 27
Table 3-3: -E2 Option Motor and Feedback Pinout 28
Table 3-4: Mating Connector Part Numbers 28
Table 3-5: Hall-Effect Sensor Specifications 31
Table 3-6: Thermistor Specifications 31
Table 3-7: Encoder Specifications 31
Table 3-8: Limit Switch Specifications 31
Table 3-9: HEX300-230HL Motor Specifications 32
Table 3-10: HEX300-230HL Rotary Encoder Specifications 32
Table 3-11: HEX300-230HL Linear Encoder Specifications (-E2 Option) 32
Table 4-1: Grease Specifications 37
Table 4-2: Troubleshooting 38
HEX300-230HL Hardware Manual List of Tables
www.aerotech.com 5

This page intentionally left blank.
List of Tables HEX300-230HL Hardware Manual
6 www.aerotech.com

Safety Procedures and Warnings
IMPORTANT: This manual tells you how to carefully and correctly use and operate the
HEX300-230HL.
lRead all parts of this manual before you install or operate the hexapod or before you
do maintenance to your system.
lTo prevent injury to you and damage to the equipment, obey the precautions in this
manual.
lAll specifications and illustrations are for reference only and were complete and
accurate as of the release of this manual. To find the newest information about this
product, refer to www.aerotech.com.
If you do not understand the information in this manual, contact Aerotech Global
Technical Support.
IMPORTANT: This product has been designed for light industrial manufacturing or
laboratory environments. If the product is used in a manner not specified by the
manufacturer:
lThe protection provided by the equipment could be impaired.
lThe life expectancy of the product could be decreased.
Safety notes and symbols are placed throughout this manual to warn you of the potential risks at the
moment of the safety note or if you fail to obey the safety note.
The voltage can cause shock, burn, or death.
You are at risk of physical injury.
You could damage the hexapod.
A surface can be hot enough to burn you.
Strong magnets and electromagnetic fields are present.
While the stage is in motion, you are in danger of receiving pinch, shear, or crush
injuries.
You could receive an injury if you do not lift the product safely.
You could damage the product if you do not lift and move the product safely.
Unsecured cables could cause you to:
ltrip and fall
ldrag the product off of its mounting location
ldamage the cable connections.
A blue circle symbol is an action or tip that you should obey. Some examples
include:
lGeneral tip
lRead the manual/section
lWear protective safety equipment (eye protection, ear protection, gloves)
lIf applicable, do not lift unassisted
HEX300-230HL Hardware Manual Safety Procedures and Warnings
www.aerotech.com 7

DANGER: To decrease the risk of electrical shock, injury, death, and damage to the
equipment, obey the precautions that follow.
lElectrical installation must be done by qualified personnel.
lBefore you do maintenance to the equipment, disconnect the electrical power.
lBefore you connect wires to this product, disconnect the electrical power.
lDo not connect or disconnect electrical components, wires, and cables while this
product is connected to a power source.
lRestrict access to the hexapod when it is connected to a power source.
lMake sure that all components are grounded correctly and that they obey the local
electrical safety requirements.
lSupply each operator with the necessary protection from live electrical circuits.
lInstall the necessary precautions to supply safety and protection to the operator.
lIt is the responsibilty of the system integrator or qualified installer to determine and
meet all safety and compliance requirements when they integrate the HEX300-230HL
into a completed system.
DANGER:PINCHPOINT! Keep Hands Clear while the stage is in motion.
WARNING: To prevent damage to the equipment and decrease the risk of electrical
shock and injury, obey the precautions that follow.
lOnly trained operators should operate this equipment.
lUse this product only in environments and operating conditions that are approved in
this manual.
lMake sure that the product is securely mounted before you operate it.
lAll service and maintenance must be done by approved personnel.
WARNING: Securely mount and position all system cables.
IMPORTANT: Carefully lift, move, and transport this product.
Safety Procedures and Warnings HEX300-230HL Hardware Manual
8 www.aerotech.com

EU Declaration of Incorporation
Manufacturer: Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
herewith declares that the product:
HEX300-230HL
is intended to be incorporated into machinery to constitute machinery covered by the Directive 2006/42/EC
as amended;
and that the following harmonized European standards have been applied:
EN ISO 12100:2010
Safety of machinery - Basic concepts, general principles for design
EN 60204-1:2010
Safety of machinery - Electrical equipment of machines - Part 1:General
requirements
and further more declares that
it is not allowed to put the equipment into service until the machinery into which it is to
be incorporated or of which it is to be a component has been found and declared to
be in conformity with the provisions of the Directive 2006/42/EC and with national
implementing legislation, for example, as a whole, including the equipment referred
to in this Declaration.
This is to certify that the aforementioned product is in accordance with the applicable requirements of the
following directive(s):
2011/65/EU RoHS 2 Directive
EU 2015/863 Amendment RoHS 3 Directive
Authorized
Representative / Simon Smith, European Director
Aerotech Ltd
The Old Brick Kiln, Ramsdell, Tadley
Hampshire RG26 5PR
UK
Engineer Verifying
Compliance / Alex Weibel
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
Date 12/21/2021
HEX300-230HL Hardware Manual EU Declaration of Incorporation
www.aerotech.com 9

This page intentionally left blank.
EU Declaration of Incorporation HEX300-230HL Hardware Manual
10 www.aerotech.com