aFe Power 54-10468 User manual

advanced FLOW engineering
Instruction Manual P/N: 54-10468/-L/-R/-N/-GN/-GR
Make: BMW Model: 3-Series/M3 (E46) Year: 1999-2007 Engine: L6

Label Qty. Description Part Number
A 1 Scoop 05-01045 (Black)
05-01045L (Blue)
05-01045R (Red)
05-01045GN (Green)
05-01045N (Orange)
05-01045GR (Gray)
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951-493-7185.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.
Page 2
Emission Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle
registered wit the state of California Department of Motor Vehicles.
Warranty Information available at: https://afepower.com/contact#warranty

Label Qty. Description Part Number
A 1 Scoop 05-01045 (Black)
05-01045L (Blue)
05-01045R (Red)
05-01045GN (Green)
05-01045N (Orange)
05-01045GR (Gray)
aFepower.com
Page 3
A

Refer to Figure A for step 1
Step 1: Remove plastic pins on ram air duct. (Save for later installation)
Page 4
1
FigureA
REMOVAL

Step 2: Remove air inlet duct and OE screws.
aFepower.com
Page 5
3
Refer to Figure B for step 2
2323 3 232
3
REMOVAL
FigureB

Refer to Figure C for step 3
Step 3: Insert DAS. Position scoop hole on plastic tab support
Page 6
3
INSTALL
Figure C

Refer to Figure D for step 4
Step 4: Install DAS by using OE screws.
aFepower.com
Page 7
INSTALL
Figure D

Page 8
Refer to Figure E for step 5
Step 5: Re-install air duct using plastic pins removed in step 1. Installation is now complete.
Thank you for choosing aFe Power!
INSTALL
Figure E

aFepower.com
Page 9
Page left blank intentionally

Page 10

aFepower.com
Page 11

advanced FLOW engineering, inc.
252 Granite Street Corona, CA 92879
https://afepower.com/contact