Ahrend SilenceCHAT User manual

december 24, 2020
Page 1
Silence CHAT
This Manual will help you build he perfec
soluion for a comforable conversaion.

december 24, 2020
Page 2

december 24, 2020
Page 3
Level / Allen 4
Floor
Make sure he floor is perfecly level.

december 24, 2020
Page 4
M10 x 25 / Allen 8
Corner Poss
They fi on every corner.
Do no ighen he bols ye.

december 24, 2020
Page 5
M10 x 25 / M10 Washer / M10 Nu / Allen 8 /
Wrench 17
Top Bars
Make sure he bols are in place before leing go.
Do no ighen he bols ye.

december 24, 2020
Page 6
M5 x 25 / Allen 3
Walls
Make sure he bols are in place before leing go.
Now ighen all bols on corner poss and op bar
members.

december 24, 2020
Page 7
M5 x 25 / Allen 3 / M5 x 10 / Phillips screwdriver
Glass Profiles
Make sure he flange is on he inside.
B
B
B
B
B
B
B
A
A
A A
A
B
!

december 24, 2020
Page 8
Meeing able high (110 cm)
Vel
Vel defines he able.
Meeing able low (75 cm)
Meeing able
Working able high (110 cm)
Working able low (75 cm)
Working able
Door
side
Door
side
Door
side
Door
side

december 24, 2020
Page 9
Frame Meeing Table
Make sure open profile is posiioned owards he
glass.
2
1
3

december 24, 2020
Page 10
M5 x 12 / Allen 4
Meeing Table
Make sure o place bols before moving on.

december 24, 2020
Page 11
M8 x 16 / Allen 6
Frame Working Table
Place he frames from he ouside of he wall and
push hem inwards.

december 24, 2020
Page 12
M5 x 12 / Allen 4
Working Table
Make sure o place bols before moving on.

december 24, 2020
Page 13
Place Cables
Place and connec cables from Conrol Uni and
pull hem hrough Frameube and ou he wall.
2
1
2
2 3

december 24, 2020
Page 14
M6 x 16 / Allen 5 / M6 Washer / M6 Nu
Conrol Uni
Be careful no o damage wires.

december 24, 2020
Page 15
M6 x 20 / Allen 5 / M6 Washer / M6 Nu
M5 x 12 / Allen 4
Monior Suppor (Opional)
Be careful no o damage wires.
B
A
B
A

december 24, 2020
Page 16
Plasic Glass Srip / Plasic Fillers (boom)
Glass Panels
Make sure no o leave he glass unaended for,
unil all profiles and rubbers are insalled.

december 24, 2020
Page 17
Plasic Fillers (sides)
Glass Panels
Make sure no o leave he glass unaended for,
unil all profiles and rubbers are insalled.
B
A
B
A
!
A = A
B = B
!
Use EQUAL amoun of fillers on each side and
place enough o make hem FIXED

december 24, 2020
Page 18
Thick Rubber Profile / Glass Cleaner
Glass Profiles
Make sure no o leave he glass unaended for,
unil all profiles and rubbers are insalled.
2
1
2

december 24, 2020
Page 19
Allen 2.5 / Small Bracke / Large Bracke
Door Assembly
Make sure oo make a perfec corner.

december 24, 2020
Page 20
M5 x 25 / Allen 3
Place Door Frame
Place carefully and make sure corners of he
door are perfecly assembled.
Make sure flange is on he inside.
!